KBC 3U User manual

3UChassisTransceiver
User Manual

3UChassisTransceiverUserManual
I
Tableof Contents
0. Product Type...................................................................................................1
1. Overview ..........................................................................................................1
1.1Introduction...............................................................................................................1
1.2TechnicalSpecification.............................................................................................2
2. PackageContents..........................................................................................2
3. TransmitterEnclosure ..................................................................................3
3.1VideoTransmitter.....................................................................................................3
3.1.18Bit Video Transmitter................................................................................3
3.1.210 Bit Video Transmitter..............................................................................4
3.2VideoMultiplexerTransmitter..................................................................................4
3.3VideoTransmitterwithreturnData.........................................................................6
3.3.18Bit Video TransmitterwithreturnData....................................................6
3.3.210 Bit Video TransmitterwithreturnData .................................................7
3.4VideoTransmitterwithBi-directionalData.............................................................8
3.4.11Fiber...........................................................................................................8
3.4.22Fibers.......................................................................................................10
3.5VideoTransmitterwithBi-directionalDataand Contact Closure........................11
3.6VideoTransmitterwithContactClosure...............................................................13
3.7Bi-directionalDataTransmitter..............................................................................14
4. ReceiverEnclosure .....................................................................................15
4.1VideoReceiver.......................................................................................................15
4.1.18Bit Video Receiver..................................................................................15
4.1.210 Bit Video Receiver................................................................................16
4.2VideoMultiplexerReceiver....................................................................................17
4.3VideoReceiverwithreturnData...........................................................................18
4.3.18Bit Video ReceiverwithreturnData......................................................18
4.3.210 Bit Video ReceiverwithreturnData ...................................................19
4.4VideoReceiverwithBi-directionalData...............................................................20
4.4.11Fiber.........................................................................................................20
4.4.22Fibers.......................................................................................................22
4.5VideoReceiverwithBi-directionalDataandContact Closure...........................23

3UChassisTransceiverUser
Manual
II
4.6VideoReceiverwithContact Closure...................................................................25
4.7Bi-directionalDataReceiver..................................................................................26
5. DataBlockConnectionandDIPSwitchSetting....................................27
6. Caution...........................................................................................................28
7. TypicalApplication ......................................................................................28
8. FR3Series ChassisCardCage..............................................................32
9. Warranty.........................................................................................................33
10. InstructionofDisassembly......................................................................34

Manual-FD BSeries-Rev1008.pdfPage1 of 34 www.kbcnetworks.com
Copyright KBCNetworksLtd.
0. ProductType
Configuration
1. Overview
1.1Introduction
The 3Uchassisseriestransceiverisdesignedusing advancedASICand high-speed DSP
technologies.Thisseriesemploys multiplexing techniquestotransmitand receive1-4
channelofVideo,1-2channelsimplexorbi-directionalDataoverasingle-mode or
multi-mode opticalfiberinalldigitalsignalingwithno compression;making itidealfor
applicationswhereinput signalintegrityand qualitymust be maintained and no loss should
be induced. Becausethe seriesutilizesall-digital, non-compression technology,itisableto
transmitsignalswithoutdistortion;whereasthe analog technologyinherentlynoisy,low
quality,longterminstabilityand susceptibletoelectromagneticallyandenvironmental
interference.Thisseriesacceptsavarietyofvideoinputs,suchasanalogordigitalvideo
recorder,DVD/VCD,digitalcamera,and CCTV.PAL,NTSCand SECAMstandardsare
supported.It supportsstandardRS232/RS422/2wiresRS485 or4wiresRS485 data
pan-tilt-zoomcontrolsignaling.Plug-and-Playdesignensureseaseofinstallationandno
electricaloropticaladjustmentisrequired.LEDindicatorsareprovided forshowing
operatingstatus.
Fiber 1 2 3 4
1310nm 1310nm/1550nm
SM MM
ST/PC SC/PC FC/PC
Video1 2 3 4
BNC DB9 C3
8bit 10bit
Data
RS422
RS232/RS422/RS485
Returndirectional Bi-directional
ContactClosureBi-directional Forwarddirectional

Manual-FD BSeries-Rev1008.pdfPage2 of 34 www.kbcnetworks.com
Copyright KBCNetworksLtd.
The 3Uchassisseriesisfullyassembled usingSMTcomponentsforstabilityand reliability.
1.2Technical Specification
VIDEO
SignalLevel 1.0VP-P typical, 1.5VP-P max.,75
SamplingResolution 8 bit 10 bit
DifferentialGain <2% <1%
DifferentialPhase <2º<1º
SignaltoNoiseRatio(SNR) 62dBtypical 67dBtypical
ConnectorType BNC / DB9/C3
DATA
Interface RS232/RS422/2wiresRS485or4wiresRS485
RS-232 DataRate DC −115.2kbps
RS-422/485 DataRate DC −250Kbps
RS-422/485 Distance 0 ~1200m
RS-422/485 Signaling TransparenttoallRS422/RS485signaling;
Compatibleto2wiresRS485or4wiresRS485.
ConnectorType Terminal
CONTACTCLOSURE
Contact Max. voltage/current 25V/0.8A(DC), 110V/0.4A(AC)
ConnectorType Terminal
OPTICAL SM MM
Wavelength 1310nm 1550nm 1310nm 1550nm
OpticalOut Power ≥-13 dB ≥-10 dB ≥-13 dB ≥-10 dB
OpticalSensitivity ≤-30 dB ≤-25 dB ≤-26 dB ≤-22 dB
Effectivepowerbudget ≤15 dB ≤12 dB
FiberType 9/125μm 62.5/125μm
Distance 0 ~25km 0~2km
GENERAL
Operating Temperature -40 ~70˚C/ -40~+158ºF
RelativeHumidity 0~95%non-condensing
Input Voltage +5VDC, 1A
Mean TimeBetween Failure(MTBF) >100,000hrs
EnclosureColor Silver
HousingStandard3U19”chassiscard
2. PackageContents
One Transmitter
One Receiver
LEDlabelfor3UChassisCard
One UserManual

Manual-FD BSeries-Rev1008.pdfPage3 of 34 www.kbcnetworks.com
Copyright KBCNetworksLtd.
Pleasecontact dealerordistributorif partismissing ordamaged.
3. TransmitterEnclosure
3.1VideoTransmitter
3.1.18BitVideoTransmitter
Connectors:
FIB,FIB1-FIB4:FiberOptic.
V,V1-V2:Video Input, BNC.
Video:Video Input, DB9.DB9Pinsassignment asbelow:
VIDEO1Channel1Video,input
VIDEO2Channel2Video,input
VIDEO3Channel3Video,input
VIDEO4Channel4Video,input
GND Common Ground of Channel1~4Video
.
LEDsDefinition:
POWER:PowerSupply.On if powerinputisOK.

Manual-FD BSeries-Rev1008.pdfPage4 of 34 www.kbcnetworks.com
Copyright KBCNetworksLtd.
Off if nopowerpresent.
NootherLEDlabelsforVideoTransmitterCards.
3.1.210 BitVideoTransmitter
Connectors:
FIB:FiberOptic.
V:Video Input, BNC.
.
LEDsDefinition:
POWER:PowerSupply.On if powerinputisOK.
Off if nopowerpresent.
FIB: FiberOpticNot used.
V1: ;Video.On if video inputisOK.
Off if novideo present.
V2-V4:Video.Not used.
3.2VideoMultiplexerTransmitter

Manual-FD BSeries-Rev1008.pdfPage5 of 34 www.kbcnetworks.com
Copyright KBCNetworksLtd.
Connectors:
FIB:FiberOptic.
V1-V4:Video Input, BNC.
V1-V4:Video Input, DB9.DB9Pinsassignment asbelow:
VIDEO1Channel1Video, Input
VIDEO2Channel2Video, Input
VIDEO3Channel3Video, Input
VIDEO4Channel4Video, Input
GND Common Ground of Channel1~4Video
LEDsDefinition:
POWER:PowerSupply.On if powerinputisOK.
Off if nopowerpresent.
FIB:FiberOptic.Not used.
V1-V4: ;Video.On if video inputisOK.
Off if novideo present.

Manual-FD BSeries-Rev1008.pdfPage6 of 34 www.kbcnetworks.com
Copyright KBCNetworksLtd.
3.3VideoTransmitterwithreturnData
3.3.18BitVideoTransmitterwithreturnData
Connectors:
FIB:FiberOptic.
V:Video Input, BNC.
DATA:RS422 Data,Terminal. Terminalpinsassignment asbelow:
RXD+Datareceivesignal “+”, output
RXD−Datareceivesignal “−”, output
NC
NC
LEDsDefinition:
POWER:PowerSupply.On if powerinputisOK.
Off if nopowerpresent.
SYNC:FiberLinkandVideo.Flash if the linkisnot OK.
Off if the linkisOKbut the video isnotOK.
On if thelinkand thevideo areOK.
DATA:DataReceive.Flash ifdatabeing received.
Off if nodatabeing received.
1
2
3
4

Manual-FD BSeries-Rev1008.pdfPage7 of 34 www.kbcnetworks.com
Copyright KBCNetworksLtd.
3.3.210 BitVideoTransmitterwithreturnData
Connectors:
FIB:FiberOptic.
V:Video Input, BNC.
DATA:RS422 Data,Terminal. Terminalpinsassignment asbelow:
RXD+Datareceivesignal “+”, output
RXD−Datareceivesignal “−”, output
NC
NC
LEDsDefinition:
POWER:PowerSupply.On if powerinputisOK.
Off if nopowerpresent.
FIB:FiberLink.Off iflinkcontinuityisgood.
On if no linkcontinuity.
V1: ;Video.On if video inputisOK.
Off if novideo present.
D1:DataReceive.Flash if databeing received.
Off if nodatabeing received.
The otherLEDsarenotused.
1
2
3
4

Manual-FD BSeries-Rev1008.pdfPage8 of 34 www.kbcnetworks.com
Copyright KBCNetworksLtd.
3.4VideoTransmitterwithBi-directional Data
3.4.11Fiber

Manual-FD BSeries-Rev1008.pdfPage9 of 34 www.kbcnetworks.com
Copyright KBCNetworksLtd.
Connectors:
FIB:FiberOptic.
V,V1-V4:Video Input, BNC orDB9. DB9pinsassignment asbelow:
VIDEO1Channel1Video,input
VIDEO2Channel2Video,input
VIDEO3Channel3Video,input
VIDEO4Channel4Video,input
GND Common Ground of Channel1~4Video
DATA:RS232/RS422/2wiresRS485 or4wiresRS485 compatible.Terminalpins
assignmentandDIPSwitchsettingrefertoTable1andTable2insection 5.Data
Block ConnectionsandDIPSwitchSetting.
LEDsDefinition:
POWER:PowerSupply.On ifpowerinputisOK.
Off if nopowerpresent.
FIB:FiberLink.Off iflinkcontinuityisgood.
On if no linkcontinuity.
V1-V4: ;Channel1-4Video.On if video inputisOK.
Off if novideo present.
D1:RS232/RS422/ 4wiresRS485Transmit Data, :Flash if databeingtransmitted.
Off ifnodatabeing transmitted.
2wiresRS485 Transmit/ ReceiveData,Flash if thereisactivity.

Manual-FD BSeries-Rev1008.pdfPage10 of 34 www.kbcnetworks.com
Copyright KBCNetworksLtd.
D2:RS232/RS422/ 4wiresRS485 ReceiveData,Flash if databeing received.
Off if nodatabeing received.
2wiresRS485 Transmit/ ReceiveData,Not used.
3.4.22Fibers
Connectors:
FIBa:Channel1FiberOptic.
FIBb:Channel2FiberOptic.
Va:Channel1Video input, C3.
Vb:Channel2Video input, C3.
Da:Channel1Data,RS232/RS422/2wiresRS485 or4wiresRS485 compatible.
Terminalpinsassignmentand DIPSwitchsetting refertoTable1and Table2
insection 5. DataBlock Connectionsand DIPSwitchSetting.
Db:Channel2Data,RS232/RS422/2wiresRS485 or4wiresRS485 compatible.
Terminalpinsassignmentand DIPSwitchsetting refertoTable1andTable2
insection 5. DataBlock Connectionsand DIPSwitchSetting.
LEDsDefinition:
POWER:PowerSupply.On if powerinputisOK.
Off ifno powerpresent.

Manual-FD BSeries-Rev1008.pdfPage11 of 34 www.kbcnetworks.com
Copyright KBCNetworksLtd.
SYNC1:FiberLink1and Video 1.Flash if the linkisnot OK.
Off ifthe linkisOKbut the videoisnot OK.
On ifthe linkand the videoareOK.
SYNC2:FiberLink2and Video 2.Flash if the linkisnot OK.
Off ifthe linkisOKbut the videoisnot OK.
On ifthe linkand the videoareOK.
D1a:Channel1, RS232/RS422/ 4wiresRS485 Transmit Data. :
Flash if databeing transmitted.
Off if nodatabeing transmitted.
Channel1, 2wiresRS485 Transmit/ ReceiveData.
Flash if thereisactivity.
D1b:Channel1, RS232/RS422/ 4wiresRS485 ReceiveData.
Flash if databeing received.
Off if nodatabeing received.
Channel1,2wiresRS485 Transmit/ ReceiveData.
Not used.
D2a:Channel2, RS232/RS422/ 4wiresRS485 Transmit Data. :
Flash if databeing transmitted.
Off if nodatabeing transmitted.
Channel2, 2wiresRS485 Transmit/ ReceiveData.
Flash if thereisactivity.
D2b:Channel2, RS232/RS422/ 4wiresRS485 ReceiveData.
Flash if databeing received.
Off if nodatabeing received.
Channel2, 2wiresRS485 Transmit/ ReceiveData.
Not used.
3.5VideoTransmitterwithBi-directional DataandContactClosure
Connectors:
FIB:FiberOptic.
V:Video input ,BNC.
DATA:RS232/RS422/2wiresRS485 or4wiresRS485 compatible.Terminalpins
DIPSwitch

Manual-FD BSeries-Rev1008.pdfPage12 of 34 www.kbcnetworks.com
Copyright KBCNetworksLtd.
assignmentand DIPSwitchsetting refertoTable1and Table2insection 5.
DataBlock Connectionsand DIPSwitchSetting.
C1:Contact Closure,input.
C2:ContactClosure,output. TheContactClosurestate,Open orClose,ofthe
contactclosureon the transmitterend followsthe stateofthe contactclosure
on thereceiverend. i.e. ifthecontact on the receiverend isClose,the contact
on the transmitterend ismade tobe Close.If the contacton the receiverend is
Open, thecontact onthe transmitterend ismade tobeOpen.
Terminalpinsassignment asbelow:
Contact Closureinput “A”
Contact Closureinput “B”
Contact Closureoutput “A”
Contact Closureoutput “B”
LEDsDefinition:
POWER:PowerSupply.On ifpowerinput isOK.
Off if nopowerpresent.
FIB:FiberLink.Off iflinkcontinuityisgood.
On if no linkcontinuity.
V1: ;Video.On if video inputisOK.
Off if novideo present.
V2-V4:Video.Not used.
D1:RS232/RS422/ 4wiresRS485Transmit Data. :Flash if databeingtransmitted.
Off ifnodatabeing transmitted.
2wiresRS485 Transmit/ ReceiveData.Flash if thereisactivity.
D2:RS232/RS422/ 4wiresRS485 ReceiveData.Flash if databeing received.
Off if nodatabeing received.
2wiresRS485 Transmit/ ReceiveData.Not used.
1
2
3
4

Manual-FD BSeries-Rev1008.pdfPage13 of 34 www.kbcnetworks.com
Copyright KBCNetworksLtd.
3.6VideoTransmitterwithContactClosure
Connectors:
FIB: FiberOptic.
V:Video input ,BNC.
C1:Contact Closure,Input.
C2:Reserved.
Terminalpinsassignment:
Contact Closureinput “A”
Contact Closureinput “B”
NC
NC
LEDsDefinition:
POWER:PowerSupply.On if powerinputisOK.
Off if nopowerpresent.
FIB:FiberLink.Not used.
V1: ;Video.On if video inputisOK.
Off if novideo present.
D1:Contact Closure.On if the contact closureisclosed.
Off if thecontact closureisopen.
The otherLEDsarenotused.
1
2
3
4

Manual-FD BSeries-Rev1008.pdfPage14 of 34 www.kbcnetworks.com
Copyright KBCNetworksLtd.
3.7Bi-directional DataTransmitter
Connectors:
FIB:FiberOptic.
DATA:RS232/RS422/2wiresRS485 or4wiresRS485 compatible,Terminal.Terminal
pinsassignment and DIPSwitchsetting refertoTable1and Table2 insection5.
DataBlock Connectionsand DIPSwitchSetting.
LEDsDefinition:
POWER:PowerSupply.On ifpowerinput isOK.
Off if nopowerpresent.
FIB:FiberLink.Off iflinkcontinuityisgood.
On if no linkcontinuity.
V1-V4:Video.Not used.
D1:RS232/RS422/ 4wiresRS485Transmit Data. :Flash if databeingtransmitted.
Off ifnodatabeing transmitted.
2wiresRS485 Transmit/ ReceiveData.Flash if thereisactivity.
D2:RS232/RS422/ 4wiresRS485 ReceiveData.Flash if databeing received.
Off if nodatabeing received.
2wiresRS485 Transmit/ ReceiveData.Not used.

Manual-FD BSeries-Rev1008.pdfPage15 of 34 www.kbcnetworks.com
Copyright KBCNetworksLtd.
4. ReceiverEnclosure
4.1VideoReceiver
4.1.18BitVideoReceiver
Connectors:
FIB,FIB1-FIB4:FiberOptic.
V,V1-V2:Video Output, BNC.
Video:Video Output,DB9.DB9Pinsassignment asbelow:
VIDEO1Channel1Video, output
VIDEO2Channel2Video, output
VIDEO3Channel3Video, output
VIDEO4Channel4Video, output
GND Common Ground of Channel1~4Video
LEDsDefinition:
POWER: PowerSupply.On if powerinputisOK.
Off if nopowerpresent.
SYNC1:FiberLink1andVideo1.Flash if the linkisnot OK.
Off if the linkisOKbut the video isnotOK.

Manual-FD BSeries-Rev1008.pdfPage16 of 34 www.kbcnetworks.com
Copyright KBCNetworksLtd.
On if thelinkand thevideo areOK.
SYNC2:FiberLink2andVideo2.Flash if the linkisnot OK.
Off if the linkisOKbut the video isnotOK.
On if thelinkand thevideo areOK.
SYNC3:FiberLink3andVideo3.Flash if the linkisnot OK.
Off if the linkisOKbut the video isnotOK.
On if thelinkand thevideo areOK.
SYNC4:FiberLink4andVideo4.Flash if the linkisnot OK.
Off if the linkisOKbut the video isnotOK.
On if thelinkand thevideo areOK.
4.1.210 BitVideoReceiver
Connectors:
FIB:FiberOptic.
V:Video Output, BNC.
.
LEDsDefinition:
POWER:PowerSupply. On if powerinputisOK.
Off if nopowerpresent.
FIB:FiberLink.Off iflinkcontinuityisgood.