KC STORE FIXTURES 01501 User manual

Hardware:
Leveler
Hex Bolt
Allen Wrench
Page 1 of 2
Assembly Instructions for
4 Way Slatwall Unit
White #01501, Gray #01502, Black #01519, Maple #01500, Cherry #01553,
Choc. Cherry #01558, Brushed Alum. #01521
www.kc-store-fixtures.com
7400 E. 12th Street, Kansas City, MO 64126 • 1-800-862-0899

Step 2
Attach (2) Slatwall Panels
together using (4) Hex Bolts by
aligning the predrilled holes with
each other in a T-shape. Thread
the Hex Bolts loosely until all
(4) Bolts are inserted, then
tighten securely.
Step 3
Attach the third Slatwall Panel
to the already assembled
Panels using (4) Hex Bolts.
Thread the hex bolts loosely
until all (4) Bolts are inserted,
then tighten securely.
Step 4
Set the assembled Slatwall Panels on
top of the Base lining up the Center
Square Opening with the Square Block
that is attached to the Base. Firmly push
the Assembled Slatwall Panels down
ensuring that there are not any gaps
between the Pinwheel and the Base.
Page 2of 2
www.kc-store-fixtures.com
7400 E. 12th Street, Kansas City, MO 64126 • 1-800-862-0899
Step 1
Turn the Base on its top. Insert the
Legs withLevelers into threaded hole
in Bracket, which is already attached
to the Base. S et Base aside.
Note:
If using casters, do not install leveling
legs. Thread caster directly
into the bracket .