KC STORE FIXTURES 28301 User manual

PAGE 1 of 3
ROUND RACK ASSEMBLY INSTRUCTIONS
36-inch #28301, 42-inch 28302
www.kc-store-fixtures.com
7400 E. 12th Street, Kansas City, MO 64126 • 1-800-862-0899

PAGE 2 of 3
ROUND RACK ASSEMBLY INSTRUCTIONS
36-inch #28301, 42-inch 28302
PARTS IN CARTON:
1 - BASE 1 - RING
FIGURE 1
STEP 1: LOCATE BASE
STEP 2: (SEE FIGURE 1)
STAND THE BASE UPRIGHT. TWO LEGS OF
THE BASE WILL BE ABLE TO SWING OUT.
SWING OUT ONE LEG FROM THE BASE
UNTIL IT IS FULLY EXTENDED 90 DEGREES
FROM THE CENTER.
REPEAT THE ABOVE STEP TO THE
REMAINING LEG TO COMPLETE THE BASE
ASSEMBLY.
STEP 3: LOCATE RING
www.kc-store-fixtures.com
7400 E. 12th Street, Kansas City, MO 64126 • 1-800-862-0899

PAGE 3 of 3
ROUND RACK ASSEMBLY INSTRUCTIONS
36-inch #28301, 42-inch 28302
STEP 4: (SEE FIGURE 2)
LOCATE THE 4 SMALL POSTS ON THE TOP OF THE ASSEMBLY.
LOCATE THE 4 HOLES ON THE BOTTOM OF THE RING.
ALIGN THE 4 HOLES OF THE RING ABOVE THE 4 POSTS OF THE BASE. SLIDE EACH POST
INTO THE HOLES OF THE RING UNTIL THE RING FULLY REST ONTO THE BASE.
BEFORE HANGING MERCHANDISE, CHECK TO MAKE SURE THE RING IS FULLY
RESTING INTO THE POSTS TO ENSURE STABILITY. ASSEMBLY COMPLETE.
FIGURE 2
FEATURES: ROUND RACK FEATURES PUSH-BUTTON EXTENDABLE LEGS. EACH PUSH-BUTTON IS LOCATED ON
THE INSIDE OF EACH LEG. PRESS IN THE PUSH-BUTTON AND ADJUST TO YOUR DESIRED HEIGHT.
NOTE: REMOVE ALL MERCHANDISE BEFORE CHANGING THE HEIGHT OF THE ROUND RACK. MAKE SURE THAT
EACH LEG OF THE ROUND RACK IS EXTENDED AT SAME LEVEL TO PREVENT UNEVENNESS.
www.kc-store-fixtures.com
7400 E. 12th Street, Kansas City, MO 64126 • 1-800-862-0899