KC STORE FIXTURES 16523 User manual

FRAMELESS GLASS TOWER
#16523
PAGE 1 OF 9
www.kc-store-xtures.com
7400 E. 12th Street, Kansas City, MO 64126 • 1-800-862-0899

FRAMELESS GLASS TOWER
#16523
PAGE 2 OF 9
Flat head screw
Qty. 1
Wood screws
Qty. 4
7/8" Bolt
Qty. 24
1/2" Bolt
Qty. 14
Nuts
Qty. 8
Plastic tube
Qty. 24
Plastic sleeves
Qty. 38
Glass shelves
Qty. 4
Back
Front
Glass top
Qty. 1
Glass sides
Qty. 2
Glass back
Qty. 1
Glass door
Qty. 1
Wood base
Qty. 1
Parts List:
"M" bracket
Qty. 2
"L" bracket
Qty. 14
Door hinges
Qty. 2
Door stop
Qty. 1
Door lock
Qty. 1
www.kc-store-xtures.com
7400 E. 12th Street, Kansas City, MO 64126 • 1-800-862-0899
A
F
M
N
OQ RP
B
GHIJ
C D
K
E
L

FRAMELESS GLASS TOWER
#16523
PAGE 3 OF 9
www.kc-store-xtures.com
7400 E. 12th Street, Kansas City, MO 64126 • 1-800-862-0899
O
B
Place wood base on a level surface.
Note: Side glass panels (P) have 12 pre-drilled holes. Back glass
panel (Q) has 10 pre-drilled holes.
STEP 1
Join one side panel and the back panel at a 90 degree angle
using four "L" brackets (B) along inside vertical corner. Do not
use the top holes on either panel. They will be used later in the
process.
Place "L" bracket (B) on the inside of glass panels and align with
holes.
Insert 7/8" bolt (I) into plastic sleeve H) then slide both through
pre-drilled hole from the outside of the glass. (Fig. 1) Screw bolt
through bracket and slide plastic tube (F) over end of bolt.
P
Q
(Fig. 1)
FH
I

FRAMELESS GLASS TOWER
#16523
PAGE 4 OF 9
www.kc-store-xtures.com
7400 E. 12th Street, Kansas City, MO 64126 • 1-800-862-0899
STEP 2
Repeat step 1 to add other side panel.
Place "L" bracket (B) on the inside of glass panels and align with
holes.
Insert 7/8" bolt (I) into plastic sleeve (H) then slide both through
pre-drilled hole from the outside of the glass. (Fig. 2) Screw bolt
through bracket and slide plastic tube (F) over end of bolt.
B
(Fig. 2)
FH
I

FRAMELESS GLASS TOWER
#16523
PAGE 5 OF 9
www.kc-store-xtures.com
7400 E. 12th Street, Kansas City, MO 64126 • 1-800-862-0899
Attach sides to wood base.
STEP 3
Place "L" bracket (B) on the inside of glass panel and align
with holes in glass and wood base.
Insert 1/2" bolt (J) into plastic sleeve (H) then slide both
through pre-drilled hole from the outside of the glass and screw
into top of bracket. (Fig. 3). Use a wood screw (L) to attach
bracket to wood base.
Repeat step 3 for all four locations on wood base.
H
J
L
(Fig. 3)
B

FRAMELESS GLASS TOWER
#16523
PAGE 6 OF 9
www.kc-store-xtures.com
7400 E. 12th Street, Kansas City, MO 64126 • 1-800-862-0899
Attach top to sides and front.
STEP 4
Attach "M" bracket (A) to each corner at the back of
the tower.
Insert 1/2" bolt (J) into plastic sleeve (H) from the
outside of the glass, slide both through pre-drilled
holes and screw into the bracket on the insde.
Next, place an "L" bracket (B) on the inside of each
glass side panel using holes closest to the door.
Insert 1/2" bolt (J) into plastic sleeve (H) and slide
both through pre-drilled hole from the outside of the
glass. Screw into bracket hole.
Repeat the above steps for each hole on sides and
top glass panels. Secure top glass in place.
A
B
H
H
J
M
J

FRAMELESS GLASS TOWER
#16523
PAGE 7 OF 9
www.kc-store-xtures.com
7400 E. 12th Street, Kansas City, MO 64126 • 1-800-862-0899
Shelf supports and shelves
STEP 5
Along the front edge of each side panel are four pre-drilled
holes for shelving.
In each hole, insert a 7/8" bolt (I) and plastic sleeve (H)
through the hole from the outside. Once through the hole, add
a nut (G) and tighten. Slide a plastic tube (F) over the end of
the bolt.
Repeat these steps for all eight locations.
Once bolts are in place, add shelves.
#3
#1
#5
#7
#4
#2
#6
#8
N
HG
IF

Door hinges and door
STEP 6
Attach one door hinge (C) to bottom, right corner of door panel
(R) with screws on the inside of the door and post pointing
down. Tighten pre-attached screws to secure hinge tightly to
glass. Insert hinge post into hole on wood base.
Insert top hinge with post pointing upward into top, right
pre-drilled hole on top glass panel. Holding door perpendicular
to the tower, slide top corner into hinge and nger tighten
screws. (Do not tighten screws all the way).
Once in place, make sure door swings evenly and smoothly
before fully tightening screws on top hinge.
FRAMELESS GLASS TOWER
#16523
PAGE 8 OF 9
www.kc-store-xtures.com
7400 E. 12th Street, Kansas City, MO 64126 • 1-800-862-0899
C
R
Top hinge
Bottom hinge

FRAMELESS GLASS TOWER
#16523
PAGE 9 OF 9
www.kc-store-xtures.com
7400 E. 12th Street, Kansas City, MO 64126 • 1-800-862-0899
STEP 7
Door stop and lock
Attach the door stop (D) to wood base using
at head screw (K).
STEP 8
Slide door lock (E) onto bottom door edge. Align the tab
under the lock with the pre-cut slot in the wood base.
Ensure lock slides smoothly up and down with key prior
to tightening screws.
D E