Kenmore KKEB1.3HSS User manual

1.3 HP Blender
with Single Serve Cup
WARRANTY / GARANTIE
09/2021-v1 H1S355
Mélangeur de 1,3 HP
avec tasse à portion individuelle
KKEB1.3HSS
Use & Care Guide
Guide d'utilisation et d'entretien
LIMITED WARRANTY
FOR FIVE YEARS from the date of original sale this appliance is warranted against defects in
material or workmanship when it is correctly installed, operated and maintained according
to all supplied instructions.
WITH PROOF OF ORIGINAL SALE a defective appliance will be replaced free of charge.
The Kenmore brand name is used under license. Direct all claims for warranty service to
Koolatron Corporation, call 1-800-265-8456 or email ser[email protected]om
This warranty is void if this appliance is ever used for other than private household purposes.
This warranty gives you specic legal rights, and you may also have other rights which vary
from state to state.
GARANTIE LIMITÉE
PENDANT CINQ ANS à compter de la date d’achat, cet appareil est garanti contre tout défaut
de matériau ou de fabrication en cas d’installation, d’utilisation et d’entretien conformément
aux instructions fournies.
AVEC PREUVE DE VENTE ORIGINALE, un appareil défectueux sera remplacé gratuitement.
Le nom de marque Kenmore est utilisé sous licence. Adressez toutes les réclamations pour
le service de garantie à Koolatron Corporation, appeler 1 800 265-8456 ou envoyer un e-mail
à [email protected]
Cette garantie est nulle si cet appareil est utilisé à des ns autres que domestiques.
Cette garantie vous confère des droits juridiques spéciques et vous pouvez également
jouir d’autres droits qui peuvent varier d’un État à l’autre.
Koolatron Corporation
4330 Commerce Dr., Batavia, NY 14020 USA
139 Copernicus Blvd., Brantford, ON N3P1N4 Canada
Kenmore and the Kenmore logo are registered trademarks to Transform SR Brands LLC
and are used under license by Koolatron Corporation Customer Assistance
Service à la clientèle
1-800-265-8456
www. koolatron.com
Kenmore et le logo Kenmore sont des marques déposées de Transform SR Brands LLC
et sont utilisées sous licence par Koolatron Corporation

Single
Serve
Stir
Chop
Mix
Liquefy
Pulse
Ice
Crush
2 3
IMPORTANT SAFEGUARDS PARTS AND FEATURES
When using electrical appliances, basic safety precautions should always be followed, including
the following:
1. READ all instructions
2. To protect against the risk of electric shock, do not put Hand mixer in water or other liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. UNPLUG from outlet when not in use, before putting on or taking o parts and before cleaning.
5. AVOID contact with moving parts. Keep hands, hair, clothing, as well as spatulas and other
utensils away from all accessories during operation to reduce the risk of injury to persons and/or
damage to the hand mixer.
6. DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunc-
tions or has been dropped or damaged in any manner. Take the appliance to a qualied service
dealer or repair.
7. The use of attachments not recommended or sold by the manufacturer may cause re electric
shock or personal injury.
8. DO NOT use outdoors.
9. DO NOT let the cord hang over the edge of the table or counter.
10. Keep hands and utensils out of container while blending to reduce the risk of severe injury to
persons or damage to the blender. A scraper may be used, but must be used ONLY when the
blender is not running.
11. Blades are sharp. Handle carefully.
12. To reduce the risk of injury, never place cutter-assembly blades on base without jar properly
attached.
13. ALWAYS operate blender with cover in place.
14. When blending hot liquids remove measuring cup from the two-piece lid. Do not ll jar
beyond 3-cup level.
15. To protect against electrical shock this appliance is equipped with a cord having a 3-prong
grounding-type plug for insertion into a proper grounding-type receptacle DO NOT alter the Plug
for use in a 2-prong receptacle. lf the plug will not t into a receptacle, have the proper receptacle
installed by a qualied electrician.
16. A short power supply cord (or detachable power supply cord) is to be provided to reduce risks
resulting from becoming entangled in or tripping over a longer cord. This appliance is equipped
with a short power supply cord.
16. This product is designed for household use only.
SAVE THESE INSTRUCTIONS!
Fig. 1
measuring cup
(middle of the lid)
lid lock ap
lid
jar
control
panel
motor
base
blade
assembly
blade
assembly
drinking
lid
Single Serve Cup

Single
Serve
Stir
Chop
Mix
Liquefy
Pulse
Ice
Crush
2 3
IMPORTANT SAFEGUARDS PARTS AND FEATURES
When using electrical appliances, basic safety precautions should always be followed, including
the following:
1. READ all instructions
2. To protect against the risk of electric shock, do not put Hand mixer in water or other liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. UNPLUG from outlet when not in use, before putting on or taking o parts and before cleaning.
5. AVOID contact with moving parts. Keep hands, hair, clothing, as well as spatulas and other
utensils away from all accessories during operation to reduce the risk of injury to persons and/or
damage to the hand mixer.
6. DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunc-
tions or has been dropped or damaged in any manner. Take the appliance to a qualied service
dealer or repair.
7. The use of attachments not recommended or sold by the manufacturer may cause re electric
shock or personal injury.
8. DO NOT use outdoors.
9. DO NOT let the cord hang over the edge of the table or counter.
10. Keep hands and utensils out of container while blending to reduce the risk of severe injury to
persons or damage to the blender. A scraper may be used, but must be used ONLY when the
blender is not running.
11. Blades are sharp. Handle carefully.
12. To reduce the risk of injury, never place cutter-assembly blades on base without jar properly
attached.
13. ALWAYS operate blender with cover in place.
14. When blending hot liquids remove measuring cup from the two-piece lid. Do not ll jar
beyond 3-cup level.
15. To protect against electrical shock this appliance is equipped with a cord having a 3-prong
grounding-type plug for insertion into a proper grounding-type receptacle DO NOT alter the Plug
for use in a 2-prong receptacle. lf the plug will not t into a receptacle, have the proper receptacle
installed by a qualied electrician.
16. A short power supply cord (or detachable power supply cord) is to be provided to reduce risks
resulting from becoming entangled in or tripping over a longer cord. This appliance is equipped
with a short power supply cord.
16. This product is designed for household use only.
SAVE THESE INSTRUCTIONS!
Fig. 1
measuring cup
(middle of the lid)
lid lock ap
lid
jar
control
panel
motor
base
blade
assembly
blade
assembly
drinking
lid
Single Serve Cup

Single
Serve
Stir
Chop
Mix
Liquefy
Pulse
Ice
Crush
Single
Serve
Stir
Chop
Mix
Liquefy
Pulse
Ice
Crush
Fig. 4
Single
Serve
Stir
Chop
Mix
Liquefy
Pulse
Ice
Crush
4 5
PREPARING YOUR BLENDER
Fig. 2
Fig. 3
OPERATING YOUR BLENDER
1. Before assembling your blender, wipe blender base with a warm sudsy cloth, then wipe clean
with a damp cloth. Dry with a soft cloth. Wash blender jar, lid, and blades in warm, sudsy water.
Rinse and wipe parts dry.
2. Align the guide ribs inside the jar collar with the
guide grooves on the motor base and lower the jar
securely into place (Fig. 2).
CONTROL PANEL
Your blender has been designed to work in a variety
of ways to suit your blending needs. You can easily
control its blending function by means of the control
panel buttons: Single Serve, Stir, Chop, Mix, Liquefy,
Ice Crush and Pulse Single Serve and Pulse allow
intermittent operation. Stir, Chop, Mix and Liquefy are
continuous operation in an ascending scale of speed
from Stir (slowest) to Liquefy (fastest). Ice Crush
contains a programmed series oof short operation
bursts and pauses followed by a continuous blending
period. See Fig. 3.
TO OPERATE BLENDER
1. Place Blender motor base on a dry, level, stable surface.
2 . Set jar assembly into place on motor base.
3. Place the food solids and liquids to be blended into the jar and put the lid on the jar before
blending. Secure the lid onto the jar by snapping the Lid Lock Flaps over the tabs on the side of
the jar. See Fig. 4. Be sure the measuring cup is in place in the middle of the lid.
NOTE - For easy lid removal, hold hand over Lock Flap on one side of lid. With other hand, release
Lock Flap on other side of lid and lift lid up.
4. Plug power cord into a standard 120-V, 60 Hz AC-only, 3-prong electrical outlet. Press the
On/O button to turn on the blender controls. The blue LED will ash 0:00 for the timer, and the
On/O button words will ash.
IMPORTANT - Always rest one hand on top of blender jar with lid securely in place when operat-
ing blender.
BLENDER FUNCTIONS
When a function button is pressed, the function operates continuously (except Ice Crush) at one
speed for a 1 minute cycle and then stops. Press the button again to turn the function o prior to
1 minute. To reactivate the function past the 1 minute cycle, simply repress the button.
NOTE - Once the On/O button is pressed, the button and window display will go out if no
function button is pressed within 2 minutes.
SINGLE SERVE
Use SINGLE SERVE function only when the Single Serve Cup is inserted onto the motor base. See
USING THE SINGLE SERVE CUP section in this Use & Care Guide.
STIR, CHOP, MIX or LIQUEFY
Press the On/O button. The button words will ash and timer will ash 0:00 in window. Press Stir,
Chop, Mix or Liquefy function button to start blender blade rotation. Timer will count up to 1
minute and blender will stop. Press On/O or function button at any time during cycle to cancel
operation.
WARNING - Injury Hazard
Unplug mixer before touching
beaters or other accessories.
Failure to do so, can result in
broken bones, cuts or bruises.
CAUTION - NEVER place blender motor base in water or other liquid.
CAUTION - Blades are sharp. Handle carefully
guide
groove

Single
Serve
Stir
Chop
Mix
Liquefy
Pulse
Ice
Crush
Single
Serve
Stir
Chop
Mix
Liquefy
Pulse
Ice
Crush
Fig. 4
Single
Serve
Stir
Chop
Mix
Liquefy
Pulse
Ice
Crush
4 5
PREPARING YOUR BLENDER
Fig. 2
Fig. 3
OPERATING YOUR BLENDER
1. Before assembling your blender, wipe blender base with a warm sudsy cloth, then wipe clean
with a damp cloth. Dry with a soft cloth. Wash blender jar, lid, and blades in warm, sudsy water.
Rinse and wipe parts dry.
2. Align the guide ribs inside the jar collar with the
guide grooves on the motor base and lower the jar
securely into place (Fig. 2).
CONTROL PANEL
Your blender has been designed to work in a variety
of ways to suit your blending needs. You can easily
control its blending function by means of the control
panel buttons: Single Serve, Stir, Chop, Mix, Liquefy,
Ice Crush and Pulse Single Serve and Pulse allow
intermittent operation. Stir, Chop, Mix and Liquefy are
continuous operation in an ascending scale of speed
from Stir (slowest) to Liquefy (fastest). Ice Crush
contains a programmed series oof short operation
bursts and pauses followed by a continuous blending
period. See Fig. 3.
TO OPERATE BLENDER
1. Place Blender motor base on a dry, level, stable surface.
2 . Set jar assembly into place on motor base.
3. Place the food solids and liquids to be blended into the jar and put the lid on the jar before
blending. Secure the lid onto the jar by snapping the Lid Lock Flaps over the tabs on the side of
the jar. See Fig. 4. Be sure the measuring cup is in place in the middle of the lid.
NOTE - For easy lid removal, hold hand over Lock Flap on one side of lid. With other hand, release
Lock Flap on other side of lid and lift lid up.
4. Plug power cord into a standard 120-V, 60 Hz AC-only, 3-prong electrical outlet. Press the
On/O button to turn on the blender controls. The blue LED will ash 0:00 for the timer, and the
On/O button words will ash.
IMPORTANT - Always rest one hand on top of blender jar with lid securely in place when operat-
ing blender.
BLENDER FUNCTIONS
When a function button is pressed, the function operates continuously (except Ice Crush) at one
speed for a 1 minute cycle and then stops. Press the button again to turn the function o prior to
1 minute. To reactivate the function past the 1 minute cycle, simply repress the button.
NOTE - Once the On/O button is pressed, the button and window display will go out if no
function button is pressed within 2 minutes.
SINGLE SERVE
Use SINGLE SERVE function only when the Single Serve Cup is inserted onto the motor base. See
USING THE SINGLE SERVE CUP section in this Use & Care Guide.
STIR, CHOP, MIX or LIQUEFY
Press the On/O button. The button words will ash and timer will ash 0:00 in window. Press Stir,
Chop, Mix or Liquefy function button to start blender blade rotation. Timer will count up to 1
minute and blender will stop. Press On/O or function button at any time during cycle to cancel
operation.
WARNING - Injury Hazard
Unplug mixer before touching
beaters or other accessories.
Failure to do so, can result in
broken bones, cuts or bruises.
CAUTION - NEVER place blender motor base in water or other liquid.
CAUTION - Blades are sharp. Handle carefully
guide
groove

Single
Serve
Stir
Chop
Mix
Liquefy
Pulse
Ice
Crush
Fig. 5
Fig. 8
Single
Serve
Stir
Chop
Mix
Liquefy
Pulse
Ice
Crush
Fig. 7
Fig. 6
6 7
USING THE SINGLE SERVE CUP
1. Insert the appliance plug into an appropriate wall
socket.
2. Fill the single serve cup with desired food and
secure the blade assembly lid onto the cup as shown.
See Fig. 6.
3. Turn the single serve cup upside down and place it
onto the motor base, aligning the tabs on the cup
with the motor base. Press the On/O button. The
Single Serve button words will ash 3 times and then
go out. The On/O button words and the timer in the
window display will begin ashing.
4. Press the Single Serve button to start blending. The
timer in the window display will count the number of
seconds each time the Single Serve button is pressed.
Operate blender with Single Serve button until
ingredients are satisfactorily blended. Press On/O
button to leave Single Serve function.
5. Rotate the single serve cup counterclockwise and
take it out from the motor base. See Fig. 7.
6. Turn the single serve cup over and rest it on a at
surface. Replace the blade assembly with the drinking
lid. See Fig. 8.
Raise the cap on the drinking lid to drink the blended
contents directly out of the cup.
WARNING
Do not touch blades. Always turn blender o and wait until
blades have stopped rotating before removing jar or lid.
OPERATING YOUR BLENDER
ICE CRUSH
Press the On/O and then the Ice Crush button. the Blender will spin for one second and rest for
two seconds. This will repeat 5 times. The blender will then run continuously for 45 seconds and
then turn o. See CRUSHING ICE in BLENDER TIPS AND TECHNIQUES section for further ice crush-
ing details.
PULSE MODE
The blender has a Pulse function that is controlled by pressing one of the other function buttons
after the Pulse button has been pressed. To run the blender intermittently (pulse mode) rather
than continuously, rst press the PULSE button. The PULSE button words will illuminate. P will
ash in the display window. Now select, press and hold the Stir, Chop, Mix or Liquefy button.
When you release the button the blender will stop and turn o. Press the Pulse button again if you
want to leave Pulse operation.
MEASURING CUP LID HOLE
To add food or pour liquid into the jar while blender is
in operation, remove the measuring cup in the middle
of the lid.
Add the ingredients through the hole in the middle of
the lid, and then replace the measuring cup
After adding ingredients, DO NOT allow the blender to
run without the lid and measuring cup securely in
place. The speed of the blades will throw contents high
up in the jar, and without the lid could spill out.
CAUTION - When removing jar from motor base after recent blender
operation, avoid contact with the metal gear on the underside of
the blade assembly. The gear will be hot from use.
OPERATING YOUR BLENDER

Single
Serve
Stir
Chop
Mix
Liquefy
Pulse
Ice
Crush
Fig. 5
Fig. 8
Single
Serve
Stir
Chop
Mix
Liquefy
Pulse
Ice
Crush
Fig. 7
Fig. 6
6 7
USING THE SINGLE SERVE CUP
1. Insert the appliance plug into an appropriate wall
socket.
2. Fill the single serve cup with desired food and
secure the blade assembly lid onto the cup as shown.
See Fig. 6.
3. Turn the single serve cup upside down and place it
onto the motor base, aligning the tabs on the cup
with the motor base. Press the On/O button. The
Single Serve button words will ash 3 times and then
go out. The On/O button words and the timer in the
window display will begin ashing.
4. Press the Single Serve button to start blending. The
timer in the window display will count the number of
seconds each time the Single Serve button is pressed.
Operate blender with Single Serve button until
ingredients are satisfactorily blended. Press On/O
button to leave Single Serve function.
5. Rotate the single serve cup counterclockwise and
take it out from the motor base. See Fig. 7.
6. Turn the single serve cup over and rest it on a at
surface. Replace the blade assembly with the drinking
lid. See Fig. 8.
Raise the cap on the drinking lid to drink the blended
contents directly out of the cup.
WARNING
Do not touch blades. Always turn blender o and wait until
blades have stopped rotating before removing jar or lid.
OPERATING YOUR BLENDER
ICE CRUSH
Press the On/O and then the Ice Crush button. the Blender will spin for one second and rest for
two seconds. This will repeat 5 times. The blender will then run continuously for 45 seconds and
then turn o. See CRUSHING ICE in BLENDER TIPS AND TECHNIQUES section for further ice crush-
ing details.
PULSE MODE
The blender has a Pulse function that is controlled by pressing one of the other function buttons
after the Pulse button has been pressed. To run the blender intermittently (pulse mode) rather
than continuously, rst press the PULSE button. The PULSE button words will illuminate. P will
ash in the display window. Now select, press and hold the Stir, Chop, Mix or Liquefy button.
When you release the button the blender will stop and turn o. Press the Pulse button again if you
want to leave Pulse operation.
MEASURING CUP LID HOLE
To add food or pour liquid into the jar while blender is
in operation, remove the measuring cup in the middle
of the lid.
Add the ingredients through the hole in the middle of
the lid, and then replace the measuring cup
After adding ingredients, DO NOT allow the blender to
run without the lid and measuring cup securely in
place. The speed of the blades will throw contents high
up in the jar, and without the lid could spill out.
CAUTION - When removing jar from motor base after recent blender
operation, avoid contact with the metal gear on the underside of
the blade assembly. The gear will be hot from use.
OPERATING YOUR BLENDER

8 9
BLENDER TIPS AND TECHNIQUES
CAUTION
Failure to follow all of the above directions can result in damage
to the blades, jar, blender motor, and possibly result in personal injury.
CAUTION - The blender blades are sharp.
Be very careful when washing them by hand to avoid being cut.
• For quicker, easier blending, cut food into 2-in. long pieces before adding to blender jar. To chop
or grate either fresh or frozen fruit, cut fruit into pieces about 3/4 -inch long.
• To best circulate foods or fruit that are to be blended with liquid, pour the liquid into the jar rst,
then add the solid foods or fruit.
• The following tasks cannot be performed eciently with a blender: beating egg whites,
whipping cream, mashing potatoes, grinding meats, mixing dough, and extracting juices from
fruit and vegetables.
• The following items should never be placed in the blender jar, as they can cause damage: bones,
large pieces of solid frozen foods, or dense, tough foods such as turnips.
CRUSHING ICE
• To crush ice, ALWAYS have liquid in the jar. Start out with 2 cups of liquid, and add about 2 cups
of ice cubes. Hold one hand rmly on the lid. Push the Ice Crush button.
• If more ice is needed, remove the measuring cup in the middle of the lid and add cubes one at a
time through the hole in the lid. DO NOT CRUSH ICE WITHOUT LIQUID.
CARE AND CLEANING
1. Before cleaning, unplug the blender.
2. Rinse parts (jar with xed blade assembly, jar lid and measuring cup, and single serving cup
blade assembly) immediately after blending for easier clean up.
3. All removable parts can be washed by hand or in a dishwasher. The jar lid and measuring cup,
and single serve lid and blade assembly should be placed in the top rack only. Disassemble all
parts from each other before placing in the dishwasher. The jar with xed blade assembly and
single serve cup are bottom rack dishwasher-safe. Do not place the jar or any other parts in
boiling liquids.
4. The motor base is designed to be resistant to liquids. If liquids spill into the motor base:
• Unplug the motor base.
• Wipe with a damp cloth and dry thoroughly.
• NEVER immerse the motor base in water.
5. Do not use abrasive scouring pads or cleaners on motor base as nish may become scratched
or damaged.
NOTES