KENT Klenzor 16 MPH User manual

EXTRACTORS
SelectSpot™
• A clear recovery tank with 2 dumping ports
allows for ease of cleaning
• Exhaust air is filtered for maintaining indoor
air quality
• Optional cart is designed with a tray and holds
cleaning accessories
Rainmaker®H and C
• Both models have a 14 gallon solution tank and 100 psi
• Features onboard storage of a floor tool and storage
compartments
• Rainmaker H features instant heat to 212° at the wand tip
and a circuit locator
Xtrac™
• CRI Seal of Approval
• 12" carpet extractor with 5 gallon solution tank
• Scrub brush can be removed and installed without
use of tools
• Optional quick connect for spotting
• Single Spray Jet technology for even water
coverage, no clogging, low gpm
• Compact folding handle and built in handgrips
make Xtrac easy to transport
Klenzor®16 and 18 MPH
• CRI Seal of Approval
• 16" and 1 " cleaning paths allow for high productivity
• A utility bag is attached to hold pre-spray or spotting solution
• Brush assisted, reducing operator fatigue
• Adjustable handle for various height operators
• Durable 7 gallon (Klenzor 16) and 11 gallon
(Klenzor 1 MPH) solution tanks
• Durable 5 gallon (Klenzor 16) and gallon
(Klenzor 1 MPH) recovery tanks
• The vacuum shoe design means better extraction for higher
recovery and quick dry times
• Tools-free brush and vacuum shoe removal makes maintenance
quick and easy
• Single brass fan spray jet provides an even spray without streaking,
clogging or over-wetting
• Optional tools-free hard floor cleaning attachment available

Vacuu Motor: 1 hp, 7 6 watt, 2-stage
Solution Pu p: 3 p.s.i. (2.6 bar) output
Solution Hose: 9 ft x 0.25 in (2.7 m x 6.4 mm) nylon
braided PVC
Solution Tank: 2 gal (7.6 L)
Recovery Tank: 2 gal (7.6 L) w/2 in (5 cm) threaded
drain cap
Recovery Hose: ft x 1 in (2.4 m x 2.5 cm)
wire-wound PVC
Hand Tool: Clear plastic, 3.5 in ( .9 cm) wide
with stainless steel handle)
Exhaust Filter: Filtrete™by 3M®, 90% efficient on
0.5 microns @ 100 feet/min.
Sound Level: 73 dB A average @ 3 ft (0.9 m)
Construction: Rotational molded polyethylene
Net Weight: 25.75 lb (11.7 kg) w/hose and cord,
20.5 lb (9.3 kg) machine only
Shipping Weight: 35 lb (15.9 kg) w/hose and cord
Models: SelectSpot™
Cleaning Path: 12 in
Solution Tank: 5 gal
Recovery Tank: 4 gal
Vacuu Motor: 1.2 hp, 2 stage
Brush Motor: 1/4hp
Waterlift: 5 in (216 cm)
Vacuu Shoe: 12 in (30.5 cm)
Flow Rate: 0.43 gal @ 60 psi
Power Cable: 25 ft Safety Yellow
Weight: 6 lb
Models: Xtrac™
Cleaning Path: 16 in (40.6 cm) 1 in (45.7 cm)
Solution Tank: 7 gal (26.5 L) 11 gal (41.6 L)
Recovery Tank: 5 gal (19 L) gal (30.2 L)
Pu p: 60 psi 60 psi
Flow Rate: 0.7 gpm 0.7 gpm
Vacuu Motor: 1.5 hp, 3 stage 1.5 hp, 3 stage
Waterlift: 117 in (297 cm) 117 in (297 cm)
Brush Motor: 1/3 hp 1/3 hp
Brush Size/Cleaning Path: 16 in (40.6 cm) 1 in (45.7 cm)
Vacuu Shoe Size: 1 in (45.7 cm) 20 in (50. cm)
Power Cable: 50 ft (15 m) 50 ft (15 m)
Min Machine Length: 29.5 in (79 cm) 2 in (71 cm)
Machine Width: 20 in (51 cm) 24 in ( 61 cm)
Tank Height: 29.5 in (75 cm) 31.75 in ( 1 cm)
Models: Klenzor®16 Klenzor®18 MPH
Solution Pu p: 100 psi 100 psi
Solution Tank Capacity: 14 gallons (53 L) 14 gallons (53 L)
Recovery Tank Capacity: 12 gallons (45 L) 12 gallons (45 L)
Vacuu Motors: 2 - 2 stage 2 - 2 stage
Built-in Heater: Yes No
Waterlift: 150 in (3 1 cm) 150 in (3 1 cm)
Air Flow: 100 cfm 100 cfm
Solution Hose Length: 15 ft (4.5 m) 15 ft (4.5 m)
Recovery Hose Length: 15 ft (4.5 m) 15 ft (4.5 m)
Rear Wheels: 10 in (25 cm) 10 in (25 cm)
Front Castors: 4 in (10 cm) 4 in (10 cm)
Power Cord: 2 - 25 ft, yellow 1 - 25 ft, yellow
Length: 36 in (91 cm) 36 in (91 cm)
Width: 17 in (43 cm) 17 in (43 cm)
Height: 3 in (96 cm) 3 in (96 cm)
Machine Weight: 3 lb (37 kg) 7 lb (35 kg)
Models: Rain aker®H Rain aker®C
14600 21st Avenue North
Plymouth, Minnesota 55447-3408
www.kenteuroclean.com
Phone [phone]
Fax [phone]
240 Superior Boulevard
Mississauga, Ontario, Canada L5T 2L2
www.kenteuroclean.com
Phone [phone] or 800-668-8400
Fax [phone] or 800-263-5111
©2008 Kent. Kent is a registered trade name o Nil isk-Advance, Inc. Form L1729K 6-08
recyclable