KENT 86355 User manual
MINI STAPLER KIT
Features & Benefits
•Light and ergonomic (only 200 grams!)
•Its very small size allows to repair hard to reach areas
•Long life rechargeable batteries
•2 power options: low (12.75W) and high (17W), depending on the thickness of the plastic
•250 staples at 17W at fill battery load
•3 possible angles (0°, 45°or 90°), for welding in any position
•Integrated LED light
•Assortment of 160 staples in the kit
Cordless and compact hot stapling system to repair any plastic
parts in minutes.
Part number: 86355-00 (UK: 86355-01)
Content:Cordless Mini Stapler and charger
Assortment of 160 staples
Leaflet with instructions for use
DS678 Hints & Tips
To reach a maximum lifetime of the battery-pack of the KENT Mini
Stapler, we recommend always storing the power unit fully charged.
UPDATED: 20.10.2015
Instructions for use
1. Choose the suitable shape of staple and place it into the electrodes (see list of staples on next page).
2. Insert the staple into the electrodes, in the angle that most suits the application (0°, 45°or 90°).
3. Once the staple is inserted into the electrode, position the staple against the area to be repaired.
4. Push the red or blue button and exert a slight pressure in order to let the staple slowly penetrate into the
plastic part. The colour of the button determines the power to use according to the thickness and the type of
plastic material:
•Blue (low power, 12.75W): plastic with 1.5 to 2 mm thickness
•Red (high power, 17W): hard plastics with thickness over 2 mm
5. Release the button and wait 3 seconds before withdrawing the KENT Mini Stapler, in order to allow the
melted plastic to harden.
6. Repeat the operation in all necessary areas until the repair is complete.
7. Cut off the excess parts of the staples with cutting pliers (protect your eyes against flying parts).
Precautions and safety
The staple inserted into the electrode during the welding phase reaches a temperature of about 500°C.
Be very careful as improper handling can cause serious burns, sparks or fire.
•Use safety goggles and heat resistant gloves when working.
•Before inserting the staple be sure the electrodes are cold.
•Do not touch the staple clip during the heating phase while it is positioned on the electrodes.
•Do not use in presence of flammable products.
•Do not use with wet hands.
•Do not store or use in humid environments.
•Do not store in direct sunlight.
•This product is designed for the repair of plastic material only.
•The KENT Mini Plastic Stapler should be used only with the original KENT staples.
MINI STAPLER KIT
DS678
Before use
Charge the unit completely before the first use.
Always charge the batteries completely (approx. 5 hours).
1. Plug in the battery charger to the electricity supply system.
2. Connect the battery charger to the side connector of the KENT Mini Stapler.
3. During charging process, the LED on the front side will be flashing (1 flash per second) .
4. The battery-pack is fully charged when LED stops flashing.
5. The battery-pack is empty when during the working process the LED starts to flash.
NB: Work can be continued by connecting the battery charger to the KENT Mini Stapler.
Hint: to reach the optimal lifetime of the battery-pack, the unit should be charged only when the batteries
are discharged completely (LED is flashing during work process).
•The charging progress is controlled by temperature of the battery-pack by a micro chip. After a longer use
of the KENT Mini Stapler, the batteries might reach an elevated temperature. The charging process will be
delayed until the batteries have cooled to the standard temperature.
•In case the unit has not been in use for a longer period and the batteries are completely empty, it is
necessary to plug in the unit for mininum 15 min. in order to be able to work with the plugged in charging
cable.
Small repairs Large repairs
0.6 mm, 100 units (86037-00)
0.8 mm, 100 units (86038-00)
0.6 mm, 100 units (86039-00)
0.8 mm, 100 units (86040-00)
0.8 mm, 100 units (86041-00)
0.8 mm, 100 units (86280-00)
0.8 mm, 100 units (86279-00)
0.8 mm, 100 units (86358-00)
The staples are available separately
Example of application for the large W-staple 86358-00:
Technical Information
Packaging:Plastic case and foam inlay
Voltage: 2.4V
Power: 12.75W/17W
Battery pack:2x 1.2V / 4.5 A / NiMh
Power supply:12VDC / 0.5 A
Charging time: max. 5h
Working time: ca.300 staples at 17W
and fully loaded
Weight of the Plastic Stapler: 220 g
Material of the staples:Stainless steel 302
Custom Tariff Code:85151100
Spare parts available on request
MINI STAPLER KIT
DS678
In order to provide you with the most appropriate Personal Protective Equipment when using our products, KENT advises that you follow the
guidelines on the packaging of the product before use. The guidelines are there for your protection and KENT provides a range of Personal
Protection Equipment such as clothing, eye glasses, goggles, face shields and breathing apparatus, complying with the latest European
legislation. If you require further advice then please phone our freephone number and we will be pleased to help you. Telephone: 0800 136925
Process Centre: KENT UK, Pitreavie Crescent, Pitreavie Business Park, Dunfermline
Fife KY11 8UQ Tel : Freephone 0800 136925 or 01383 737393 between 08:30-17:30
Monday-Thursday, 09:00-15:00 on Fridays’. For out of hours queries please Fax us on
Terms and Conditions
No part of this publication may be reproduced
transmitted or stored, electronically, mechanically or
photocopied without the prior permission of KENT UK.
This data sheet and its contents (the "Information")
belong to KENT UK or are licensed to it. No licence
is granted for the use of it other than for information
purposes in connection with the products to which
it relates. No licence of any intellectual property
rights is granted.
The Information is subject to change without notice
and replaces all data sheets previously supplied.
The Information supplied is believed to be accurate
but the business assumes no responsibility for its
accuracy or completeness, any error from or omission
in it nor for any use made of it. Users of this data sheet
should check for themselves the Information and the
suitability of the products for their purpose and not
make any assumptions based on information included
or omitted. Liability for loss or damage resulting from
any reliance on the Information or use of it (including
liability resulting from negligence or where the business
was aware of the possibility of such loss or damage
arising) is excluded. This will not operate to limit or
restrict the business liability for death or personal injury
resulting from its negligence.
Registered Office: Berner UK Limited
Amber House, Showground Road
Bridgwater, Somerset,
United Kingdom TA6 6AJ
All rights reserved.
Health & Safety Information
The product is not subject to identification regulations under EC Directives and the Ordinance on
Hazardous Materials.
Mini Stapler is in compliance with the directives 2004/108/CE -2006/42/CE -2006/95/CE and the
following standards apply: EN50063 -EN50199
Content of the kit
1x Mini Stapler
1x 12V charger
1x Assortment box (empty: 86282-00)
1x leaflet with instructions for use
20x W-staples 0,6mm (per 100: 86037-00)
20x W-staples 0,8mm (per 100: 86038-00)
20x S-staples 0,6mm (per 100: 86039-00)
20x S-staples 0,8mm (per 100: 86040-00)
20x V-staples 0,8mm (per 100: 86041-00)
20x double M-staples 0,8mm (per 100: 86279-00)
20x double V-staples 90°0,8mm (per 100: 86280-00)
20x large W-staples 0,8mm (per 100: 86358-00)
This manual suits for next models
2
Table of contents
Other KENT Tools manuals
