Kenwood WF900 User manual

WF910 digital 30 day
cartridge life indicator
●To set the cartridge life indicator
press and hold the button until (30)
appears on the display .
●The display will countdown
automatically. When the display
reaches ‘05’ the display will start
flashing until it reaches ‘00’ to
indicate that the cartridge should
be changed . If the display is
blank, repeat the step
above.
care & cleaning
WF910 digital cartridge life
indicator
●When not in regular use, the
display can be switched off to
prolong the battery life. Press and
hold the button until the display
disappears. The unit can then be
stored.
WF910 lid
●Do not immerse in water.
●Wipe with a damp cloth, then dry.
other parts + WF900 lid
●Lift out the hopper .
●Remove the cartridge.
●Then wash the parts in warm
soapy water, rinse and dry.
●Do not place any of the parts in the
dishwasher.
●Do not use abrasive cleaners.
service
●The WF910 cartridge life indicator
and lid are sealed for life. When the
life indicator has reached the end
of its useful life, dispose of the lid
according to local recycling
recommendations for the disposal
of batteries. Contact Customer
Care for a replacement.
●If you need help with using your
water filter (in or out of guarantee)
call Kenwood Customer Care on
023 9239 2333. Please have
your model number and the date
code (4 digit code i.e. 5B05) ready
- they are on the underside of the
water filter jug.
before using for the first
time
●Read these instructions and retain.
●Remove all packaging and any
labels.
●Wash the parts “see care and
cleaning”
IMPORTANT NOTES
Always treat the filtered water as a
“food stuff” and follow the hygiene
guidelines below:
●Always wash your hands before
handling the unwrapped filter
cartridges, especially if you have
been preparing raw food such as
meat or poultry.
●Consume filtered water
immediately or store in a
refrigerator. Discard any unused
filtered water after 24 hours.
●The filter is for treating mains tap
water only. Do not filter hot or
boiling water.
●Clean the jug, lid and hopper
regularly, at least every time you
change the cartridge.
●Once fitted the filter cartridge should
be kept in contact with the water.
●During prolonged periods of non
use (eg holiday), any unwrapped
or partly-used cartridges should be
stored in the refrigerator - ideally
still inserted in the water hopper.
●If the filter has not been used for
48 hours, flush the cartridge
through by filling the hopper twice
and discarding the water.
●Like tap water filtered water should
be boiled and cooled before being
given to babies and young infants.
●Always check the date code on
the cartridge wrapper. If past the
use by date, discard.
●For hygiene reasons and
regardless of usage always change
the cartridge every 30 days.
●The filter should be kept out of
direct sunlight and away from
other heat sources.
●Do not store the cartridges next to
household chemicals or cleaning
products.
●In the event of your water supplier
issuing a “boil notice” (or similar
emergency indicating that your
water supply may be temporarily
unsafe) the filter system should not
be used, and any cartridge in use
should be disposed of.
key
manual cartridge change
reminder (WF900)
digital 30 day cartridge life
indicator (WF910)
lid
cartridge
hopper
jug
to use your water filter
1Remove wrapper and immerse the
cartridge in cold water. Gently
agitate the cartridge until the air
bubbles cease and leave to soak
for 10 minutes .
2Remove the lid, insert the cartridge
into the hopper and press gently to
seal.
3Fill the hopper from the tap and
allow the water to filter. Discard the
filtered water . Repeat.
WF900 manual cartridge
change reminder
●Set the cartridge change reminder
for “30 days” from when the
cartridge is inserted into the
hopper .
●Set the month and day by using
the sliders on the underside of the
lid - Use slider (A) to set the month
and slider (B) to select the day.
The day and month will be
displayed in the panel on the top of
the lid. Example 30th March will be
displayed as 30. 03.
●The cartridge should be changed
when the set date is reached.
30.03.
30. 03.
start
30
start
05
start
00
0
30
1545
start
30
30. 03.












x 2
B
A

Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK
www.kenwoodworld.com 57590/1
WF900
WF910
30. 03.
start
30
Frequently asked questions?
question answer
The cartridge is damp and Yes
there is moisture in the bag.
Is this normal?
Why do you need to soak The cartridge contains a filtration medium that
the cartridges? needs to be kept moist to do its job effectively.
The plastic wrapper helps to retain the moisture
during transit, but to ensure the cartridge works
effectively it needs to be soaked for 10 minutes
before use.
Why should the water be Like any foodstuff, water is a perishable
used straight away? product. Filtering removes chlorine, which is
used to sterilise the water, thus reducing the
shelf life of the filtered water. Any unused
filtered water should be discarded after 24hours.
Why does the cartridge For hygiene reasons the cartridge should be
only last for 30 days? changed every 30days regardless of usage.
Why is the water sometimes On occasions when using a new cartridge the
tinted black/blue when first few litres can appear to be tinted black/blue.
first used? This colour is due to a small amount of carbon
dust being flushed out of the cartridge. This is
not harmful as the carbon is food grade and will
usually disappear if the cartridge is flushed
through a couple of times.
What is inside the cartridge? The cartridge has mesh filters top and bottom,
which trap fine particles. A special food grade
resin removes heavy metals and limescale.
Activated carbon removes chlorine and some
organic pollutants.
Is filtered water suitable for Yes
those on a low sodium diet?
Is filtered water suitable Yes, filtered water is suitable for babies and
for babies? making up baby formula. However like tap
water, it must be boiled and cooled before being
given to babies and infants.