KEPCO ATE 1/4 RACK User manual

MODEL
INSTRUCTION MANUAL
IMPORTANT NOTES:
1) This manual is valid for the following Model and associated serial numbers:
MODEL SERIAL NO. REV. NO.
2) A Change Page may be included at the end of the manual. All applicable changes and
revision number changes are documented with reference to the equipment serial num-
bers. Before using this Instruction Manual, check your equipment serial number to identify
your model. If in doubt, contact your nearest Kepco Representative, or the Kepco Docu-
mentation Office in New York, [phone], requesting the correct revision for your par-
ticular model and serial number.
3) The contents of this manual are protected by copyright. Reproduction of any part can be
made only with the specific written permission of Kepco, Inc.
Data subject to change without notice.
KEPCO®
THE POWER SUPPLIER™
ORDER NO. REV. NO.
KEPCO, INC. !131-38 SANFORD AVENUE !FLUSHING, NY. 11352 U.S.A. !TEL [phone] !FAX [phone]
email: [e-mail] !World Wide Web: http://www.kepcopower.com
KEPCO INC.
An ISO 9001 Company.
ATE 100-0.5M F19688 9
©1999, KEPCO, INC.
ATE 1/4 RACK
POWER SUPPLY
AUTOMATIC TEST EQUIPMENT
ATE 1/4 RACK
POWER SUPPLY
NOTE This on-line version of the Technical
Manual includes only installation and
operating instructions. For the complete
manual, please contact Kepco.