KEPCO TBC Series User manual

MODEL
INSTRUCTION MANUAL
NOTE: This on-line version of the
Technical Manual includes only
installation and operating
instructions. For the complete
manual, please contact Kepco.
ORDER NO. REV. NO.
KEPCO®
THE POWER SUPPLIER™
KEPCO, INC. !131-38 SANFORD AVENUE !FLUSHING, NY. 11352 U.S.A. !TEL [phone] !FAX [phone]
email: [e-mail] !World Wide Web: http://www.kepcopower.com
KEPCO INC.
An ISO 9001 Company.
©2010, KEPCO,INC.
TBC SERIES
POWER SUPPLY
BATTERY CHARGER POWER SUPPLY WITH RELAY ALARM SIGNALS
TBC SERIES
POWER SUPPLY

unit shuts off, the unit must be rest by either a) removing a-c input power and the battery for
about 30 seconds and then turning the unit back on again or b) using the remote control (RC)
terminals of TB2 at the rear panel toggle the unit to OFF, then ON for immediate reset. For
overtemperature, the unit must cool sufficiently for reset to be effective.

18.6 (8.5)
29.2 (13.3)
30