Key Digital KD-MSVA4X4 FatBOY User manual

Operating Instructions
Key Digital
®
FatBoy Series
™
KD-MSVA4x4 is a Video/Audio Matrix Switcher capable of
separate switching of 4 Component (YPbPr) Video Sources/Inputs to 4 independent Zones/
Outputs with Analog and Digital Audio.
KD-MSVA4X4
4 Inputs to 4 Outputs Component Video
with Audio Matrix Switcher
KD-MSVA4X4_Manual.indd 1 3/22/10 3:10 PM

Page 2 Page 3
Table of Contents
About KD-MSVA4X4 ......................................................... 3
Connections, LEDs and Button Map ............................................. 4
Application Example ......................................................... 5
Quick Setup Guide .......................................................... 6
RS-232 Control Commands ................................................... 7
Specifications .............................................................. 8
Important Product Warnings & Safety Instructions ................................... 9
How to Contact Key Digital
®
....................................................10
Warranty Information .........................................................11
About KD-MSVA4X4
Description
»Video/Audio Matrix Switcher capable of separate switching of up to 4 Component (YPbPr)
Video Sources/Inputs to 4 independent Zones/Outputs with Analog and Digital Audio
Key Features
»Full independent matrix switching of Video and Audio
»Supports all SD, HD, and VESA (VGA, SVGA, XGA, WXGA, SXGA, UXGA) resolutions up to
1080p (60Hz & 50Hz)
»SD & HD: 480i, 480p, 720p, 1080i, 1080p
»VESA / VGA (RGBHV): From 640x480p up to 1920x1200p
»Inputs support L/R Analog and PCM Coaxial Digital Audio
»Front LED’s indicate the selected source and input/output status
Key Benefits
»Independent or simultaneous muting of Video and Audio
»Capable of switching RGBHV signals by sharing 2 inputs and 2 output zones
»Serial IR, Optical IR, Front Panel Control, Discrete Remote Codes, and RS-232. Supports
major control systems such as AMX
®
, Colorado vNet
®
, Control4
®
, Crestron
®
, HomeLogic
™
,
lifeIware
™
, RTI
®
, Savant, Universal
®
, Xantech
®
© 2009 Key Digital, Inc. All rights reserved.
KD-MSVA4X4_Manual.indd 2-3 3/22/10 3:10 PM

Page 4 Page 5
Application Example
Component
Comp
L/R Audio
PCM Audio
L/R
Comp
L/R
Comp
L/R
Comp
L/R
Comp
L/R
PCM
Comp
L/R
PCM
Comp
L/R
PCM
Comp
L/R
PCM
PCM
PCM
PCM
PCM
Display
Projector
Distributed Audio System
Speakers Display Speakers Display SpeakersSpeakers
Blu-Ray Cable Box Satellite Box DVD Player
KD-MSVA4X4
RS232 Control
Serial IR
Optical IR
Optical IR
Zone 1 Zone 2 Zone 3 Zone 4
Unit Connection Plate
LED Lights
Connections, LEDs and Button Map
Power Connection
Serial IRIR Eye
RS-232 Port
Input Connections
Output Connections
Video Input Selected
Indicates selected
Video Source
Component (YPbPr)
Video Inputs
Pr (Red), Y (Green), Pb (Blue)
Component (YPbPr)
Video Outputs
Pr (Red), Y (Green), Pb (Blue)
Audio Inputs
L/R Analog, PCM Digital Audio
Audio Outputs
L/R Analog, PCM Digital Audio
Audio Input Selected
Indicates selected
Audio Source
Output Video Mute
Lights sequentially flash to
indicate Video Mute is enabled
Output Audio Mute
Lights sequentially flash to
indicate Audio Mute is enabled
Buttons
Output Video Select
Cycle through to select
desired Video Input
Output Audio Select
Cycle through to select
desired Audio Input
Operation Switch
Switch to “Program”
when upgrading
firmware
Front
Rear
KD-MSVA4X4_Manual.indd 4-5 3/22/10 3:10 PM

Page 6 Page 7
Quick Setup Guide
½Insert Component Video and Audio cables into appropriate Input/Output Connections
»Connect Video and Audio source devices to the Input ports
»Connect Video and Audio displays devices to the Output ports
Matrix Switching via Push Buttons
½Push “Output Video Select” button to select desired Video source
½Push “Output Audio Select” button to select desired Audio source
Matrix Switching via IR
½To switch Video Independently:
»xx “R2” yy
»xx = # of desired Video Output
»yy = # of desired Video Input
½To switch Audio Independently:
»xx “R3” yy
»xx = # of desired Audio Output
»yy = # of desired Audio Input
½To switch Video and Audio simultaneously:
»xx “R4” yy
»xx = # of desired Video and Audio Output
»yy = # of desired Video and Audio Input
Matrix Switching via RS-232
½To switch Video Independently:
»SPOxxSIyy
»xx = # of desired Video Output
»yy = # of desired Video Input
½To switch Audio Independently:
»SPOxxSAyy
»xx = # of desired Audio Output
»yy = # of desired Audio Input
½To switch Video and Audio simultaneously:
»SPOxxSByy
»xx = # of desired Video and Audio Output
»yy = # of desired Video and Audio Input
RS-232 Control Commands
»Baud Rate: 57600
»Data Bits: 8 »Parity: None
»Stop Bits: 1 »Flow Control: None
RS-232 Commands
Command Name Command Value Description
Help H Gives full listing of RS-232 Commands
Power Off PF
Power On PN
System Output Setup Commands, xx = [01-04, A]
Video Mute SP Oxx VM y xx = 01-04,
y = E/D
(Enable/Disable)
Audio Mute SP Oxx AM y xx = 01-04,
y = E/D
(Enable/Disable)
Channel (Audio &
Video) Mute
SP Oxx AVM y xx = 01-04,
y = E/D
(Enable/Disable)
Mute Interval
(Switching Speed)
SP Oxx MI yy xx = Output #,
yy = Mute Index
Video Switching SP Oxx SI yy xx = Output #,
yy = Input #
Audio Switching SP Oxx SA yy xx = Output #,
yy = Input #
Audio & Video
Simultaneous
Switching
SP Oxx SB yy xx = 01-04,
yy = Input #
System Control Setup Commands
IR Sensor Control SP C IR y y = E/D
(Enable/Disable)
Front Button Control SPC FB y y = E/D
(Enable/Disable)
RS-232 Response
Type
SPC RS y y = N/V
(Numeric/Verbose)
Dictates output / system status responses
style
All Output Channels
Mute
SP C CM y y = E/D
(Enable/Disable)
Factory Default
Reset
SPC DF Resets all settings to factory default
KD-MSVA4X4_Manual.indd 6-7 3/22/10 3:10 PM

Page 8 Page 9
Status Commands
Global System
Status
ST A
Output xx Status ST Oxx Status for selected output
Specifications
Technical:
»Input (Each): YPrPb on 3 RCA female 1Vpp/75Ω; 1 Composite Video or SPDIF on 1 RCA
female 1Vpp/75Ω. Left and Right Analog Line Audio on two RCA connectors
»Output (Each): YPrPb on 3 RCA female 1Vpp / 75 Ω; 1 Composite Video or SPDIF on 1
RCA female 1Vpp/75Ω. Left and Right Analog Line Audio on two RCA connectors
»Max Video Input Level: YPrPb: 1.2Vpp on 75 Ω, AC coupling; Composite Video or S/PDIF:
1.2Vpp on 75 Ω, AC coupling
»Return Loss: -19dB
»Max Video Output Level: YPrPb: 1.5Vpp on 75 Ω, DC coupling; Composite Video or S/
PDIF: 1.2Vpp on 75 Ω, AC coupling
»Resolution: Up to UXGA; 1080p
»Control: Front panel push buttons and LED’s, front and rear Infrared Receiver, Wired IR on
rear, RS-232 on Tx and Rx lines
»Matrix Switching: Full independent matrix switching of Video and Audio
»Video S/N Ratio: 58dB RMS un-weighted; 65 dB RMS @ 5MHz weighted, optimal EQ
»K-Factor: 0.22% @ optimal EQ
»Video Isolation (Crosstalk): -45dB @ 5MHz
»Resolution Conversion: 24 bits
»Analog Audio Max Input Level: 4dBu on 50kΩ, AC coupling
»Analog Audio Max Output Level: 4dBu on 150kΩ, DC coupling
»Audio Bandwidth: 20Hz to 20kHz @ 0dBu
»TND + Noise: 0.33% @0dBu @ 1kHz
»S/PDIF Max Input Level: 1Vpp on 75Ω, AC coupling
»S/PDIF Max Output Level: 1Vpp on 75Ω, DC coupling
»Power: +6V, 6.6A
General:
»Regulation: CE, RoHS, WEEE
»Rack Mount: 1U, 1 Rack Width (rack ears included)
»Enclosure: Black Metal
»Product Dimensions: L = 17.5” W = 7” H = 1.75”
»Shipping Carton Dimensions: L = 23.5” W = 11” H = 4.5”
»Product Weight: 6 lb
»Shipping Weight: 9 lb
»Accessories: IR Remote, UL Certified Power Supply
Important Product Warnings:
½Connect all cables before providing power to the unit.
½Test for proper operation before securing unit behind walls or in hard to access spaces.
½If installing the unit into wall or mounting bracket into sheet-rock, provide proper screw support
with bolts or sheet-rock anchors.
Safety Instructions.
Please be sure to follow these instructions for safe operation of your unit.
½Read and follow all instructions.
½Heed all warnings.
½Do not use this device near water.
½Clean only with dry cloth.
½Install in accordance with the manufacturer’s instructions.
½Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
½Only use attachments/accessories specified by the manufacturer.
½Refer all servicing to qualified service personnel. Servicing is required when the device has
been damaged in any way including:
»Damage to the power supply or power plug
»Exposure to rain or moisture
You MUST use the Power Supply provided with your unit or you VOID
the Key Digital
®
Warranty and risk damage to your unit and associated equipment.
KD-MSVA4X4_Manual.indd 8-9 3/22/10 3:10 PM

Page 10 Page 11
How to Contact Key Digital
®
System Design Group (SDG)
For system design questions please contact us at:
½Phone: 914-667-9700
½E-mail: [e-mail]
Key Digital Trainings
For questions about Key Digital
®
Trainings please contact us at:
½Phone: 914-667-9700
½E-mail: [e-mail]
Customer Support
For customer support questions please contact us at:
½Phone: 914-667-9700
½E-mail: [e-mail]
Technical Support
For technical questions about using Key Digital
®
products, please contact us at:
½Phone: 914-667-9700
½E-mail: [e-mail]
Marketing and Public Relations:
For marketing and public relations information, please contact us at:
½Phone: 914-667-9700
½E-mail: [e-mail]
Repairs and Warranty Service
Should your product require warranty service or repair, please obtain a Key Digital
®
Return Material
Authorization (RMA) number by contacting us at:
½Phone: 914-667-9700
½E-mail: [e-mail]
Feedback
Please email any comments/questions about the manual to:
½E-mail: [e-mail]
Warranty Information
All Key Digital
®
products are built to high manufacturing standards and should provide years of
trouble-free operation. They are backed by a limited two-year parts and labor warranty.
KD-MSVA4X4_Manual.indd 10-11 3/22/10 3:10 PM

521 East 3rd Street, Mount Vernon, NY 10553
Phone :: [phone] Fax :: [phone]
Web :: www.keydigital.com
Key Digital
®
, led by digital video pioneer Mike Tsinberg,
develops and manufactures high quality, cutting-edge
technology solutions for virtually all applications where
high quality video imaging is important. Key Digital
®
is at the forefront of the video industry for Home
Theater Retailers, Custom Installers, System Integrators,
Broadcasters, Manufacturers, and Consumers. We
provide
total video system solutions because we
know and help drive the technology, the industry, the
business, and all the latest up-and-coming standards.
But most of all, we know exactly what you need for your
unique application - the right solution.
Rev 0 – Mar. 2010
KD-MSVA4X4_Manual.indd 12 3/22/10 3:10 PM