Kind KD-C1000UH User manual

KD-C1000UH
Instructions for use
Please read this manual carefully before using the machine and keep it for future reference
。
Matters needing attention
When installing the device, be sure to read this safety guide carefully and follow the
installation instructions strictly.

Keep this specification safe for future reference.。
Before connecting the switching power supply of the device to the external power
supply, check the voltage of the power supply and pay attention to the control
power of the device
Voltage label, the voltage is DC12V.
Use the device in the required temperature and humidity environment. The ambient
temperature of the camera ranges from 0 ° C to +40 ° C, and the humidity is less
than 90%. Prevent foreign bodies from entering the equipment and corrosive liquid
from splashing on the equipment to prevent dange
During transportation, storage and installation, heavy weight, violent vibration and
immersion should be prevented from damaging the product.
Do not disassemble the camera without permission. The relevant work should be
carried out by qualified maintenance personnel.
Avoid pointing the camera at bright objects, such as the sun, lights, etc.
Use a dry, soft cloth to clean the camera case. In case of stubborn dirt, use a neutral
cleaner to wipe the camera case.
Do not use strong or abrasive cleaners to avoid chafing the camera casing and lens
and affecting image quality.

Directory.
一、Product overview......................................................................................................................4
二、Connection specification ..........................................................................................................5
三、Camera debugging instructions................................................................................................6
（三）FOUCS ...........................................................................................................................9
（四）WB ............................................................................................................................. 10
（五）SYSTEM ...................................................................................................................... 10
（六）COLOR........................................................................................................................ 11
（七）IMAGE........................................................................................................................ 11
Note: If the camera cannot be used normally or the parameters are abnormal, it is
recommended to restore the default values................................................................................. 12
四、Remote control debugging instructions ................................................................................ 12
五、Packing list ............................................................................................................................. 14
Camera control all-in-one machine, packing case, instruction manual (electronic file), warranty
card, certificate of qualification..................................................................................................... 15
六、After-sales service ................................................................................................................. 15
The company provides limited warranty and lifetime repair service.................. 15

一、Product overview
1. 1-inch Exmor R CMOS imager with broadcast-quality 4K images；
2. 12x optical zoom, SRZ 4K 18x; HD 24x；
3. Servo motor high speed head, translation/pitching speed 0.1°~300°/ s；
4. 4K HDBaseT remote lossless image transmission and control technology；
5. 12.4 million pixels, 3,840 × 2,160 resolution；
6. 3G-SDI, HDMI, HDBaseT 4K video output；
7. Audio XLR×2 input with 48V fantasy power supply, plus embedded audio；
8. Case and 360°TALLY light；
9. Applications: 4K image shooting, studio, media live broadcasting, multi-camera
shooting；
10. Size: 160mm155mm×230mm; Weight: About 1.8kg；

二、Connection specification
The external control protocol supports RS232/RS485. The following figure shows the
protocol sequence
Dip switch Settings are as follows
Dip 1：
SW1(1-8bit)
SwitchNumber
1
2
3
4
5
6
7
8
Address1
OF
OFF
OFF
OFF
OFF
OFF
OFF
Address2
ON
OF
OFF
OFF
OFF
OFF
OFF

Address3
OFF
ON
OFF
OFF
OFF
OFF
OFF
Address4
ON
ON
OFF
OFF
OFF
OFF
OFF
Address5
OFF
OFF
ON
OFF
OFF
OFF
OFF
Address6
ON
OFF
ON
OFF
OFF
OFF
OFF
Address7
OFF
ON
ON
OFF
OFF
OFF
OFF
RS232
OFF
RS485
ON
Dip 2：
SW2(1-8bit)
SwitchNumber
1
2
3
4
5
6
7
8
VISCA
OFF
OFF
PELCO-D
OFF
ON
2400BPS
OFF
ON
4800BPS
ON
OFF
9600BPS
OFF
OFF
28400BPS
ON
ON
NORMAL
OFF
TRACE
ON
The camera adopts the VISCA protocol by default, 9600 baud rate
三、Camera debugging instructions
（一）、This section describes the Settings menu of the camera
1. Click the "OK" key of the driver or the "MENU" key of the remote
control of the camera to enter the setting graphic menu, as shown in the
figure below
RETURN
return
-->
EXPOSURE
Exposure mode
-->

FOUCS
Focusing mode
AUTO
WB
White balance
-->
SYSTEM
system
-->
COLOR
color
-->
IMAGE
IMAGE
-->
（二）、EXPOSURE
1. Automatic mode
RETURN
RETURN
-->
EXPOSURE
EXPOSURE
AUTO
Automatic
mode
GAIN
GAIN
001
SHUTTER
SHUTTER
018
IRIS
IRIS
019
BRIGHT
BRIGHT
019
EXPCOMP
EXPCOMP
0FF
LEVEL
LEVEL
007
BLC
BLC
0FF
2. Luminance priority mode
RETURN
RETURN
-->
EXPOSURE
EXPOSURE
BRIGHT
BRIGHT
GAIN
GAIN
001
SHUTTER
SHUTTER
018
IRIS
IRIS
019
BRIGHT
BRIGHT
019
EXPCOMP
EXPCOMP
0FF
LEVEL
LEVEL
007
BLC
BLC
0FF

3. Gain priority
RETURN
RETURN
-->
EXPOSURE
EXPOSURE
GAIN
GAIN
GAIN
GAIN
001
SHUTTER
SHUTTER
018
IRIS
IRIS
019
BRIGHT
BRIGHT
019
EXPCOMP
EXPCOMP
0FF
LEVEL
LEVEL
007
BLC
BLC
0FF
4. SHUTTER
RETURN
RETURN
-->
EXPOSURE
EXPOSURE
SHUTTER
SHUTTER
GAIN
GAIN
001
SHUTTER
SHUTTER
018
IRIS
IRIS
019
BRIGHT
BRIGHT
019
EXPCOMP
EXPCOMP
0FF
LEVEL
LEVEL
007
BLC
BLC
0FF
5.MANUAL
RETURN
RETURN
-->
EXPOSURE
EXPOSURE
MANUAL
MANUAL
GAIN
GAIN
001
SHUTTER
SHUTTER
018

IRIS
IRIS
019
BRIGHT
BRIGHT
019
EXPCOMP
EXPCOMP
0FF
LEVEL
LEVEL
007
BLC
BLC
0FF
（三）FOUCS
RETURN
RETURN
-->
EXPOSURE
EXPOSURE
AUTO
FOUCS
FOUCS
-->
WB
WB
-->
SYSTEM
SYSTEM
-->
COLOR
COLOR
-->
IMAGE
IMAGE
-->
(1) autofocus
RETURN
RETURN
-->
EXPOSURE
EXPOSURE
AUTO
FOUCS
FOUCS
AUTO
WB
WB
-->
SYSTEM
SYSTEM
-->
COLOR
COLOR
-->
IMAGE
IMAGE
-->
（2）Manual focusing
RETURN
RETURN
-->
EXPOSURE
EXPOSURE
AUTO
FOUCS
FOUCS
MANUAL
WB
WB
-->
SYSTEM
SYSTEM
-->
COLOR
COLOR
-->
IMAGE
IMAGE
-->

（四）WB
RETURN
RETURN
-->
WB
WB
AUTO
AUTO
RGAIN
RGAIN
211
BGAIN
BGAIN
156
1. OUTDOOR
RETURN
RETURN
-->
WB
WB
OUTDOOR
OUTDOOR
RGAIN
RGAIN
211
BGAIN
BGAIN
156
2. INDOOR
RETURN
RETURN
-->
WB
WB
INDOOR
INDOOR
RGAIN
RGAIN
211
BGAIN BGAIN 156
3. ONE PUSH
RETURN
RETURN
-->
WB
WB
ONE PUSH
ONE PUSH
RGAIN
RGAIN
211
BGAIN
BGAIN
156
4. ATW
RETURN
RETURN
-->
WB
WB
ATW
ATW
RGAIN
RGAIN
211
BGAIN
BGAIN
156
（五）SYSTEM
RETURN
RETURN
-->
EXPOSURE
EXPOSURE
AUTO

FOUCS
FOUCS
-->
WB
WB
-->
SYSTEM
SYSTEM
-->
COLOR
COLOR
-->
IMAGE
IMAGE
-->
RETURN
RETURN
-->
WB
WB
OUTDOOR
OUTDOOR
F-RATE
F-RATE
1080I50
RESET
RESET
OFF
OFF
Press the left arrow key to select different resolutions, and click
PRSET to reset the system.
（六）COLOR
RETURN
RETURN
-->
EXPOSURE
EXPOSURE
AUTO
FOUCS
FOUCS
-->
WB
WB
-->
SYSTEM
SYSTEM
-->
COLOR
COLOR
-->
IMAGE
IMAGE
-->
Press the left arrow key to appear the following picture
RETURN
RETURN
-->
GAIN
GAIN
004
HUE
HUE
007
You can adjust the GAIN and HUE parameters to adjust the color。
（七）IMAGE
RETURN
RETURN
-->
EXPOSURE
EXPOSURE
AUTO
FOUCS
FOUCS
-->
WB
WB
-->
SYSTEM
SYSTEM
-->
COLOR
COLOR
-->
IMAGE
IMAGE
-->

Press the left arrow key to appear the following picture
RETURN
RETURN
-->
E-PLIP
E-PLIP
OFF
OFF
LR REV
LR REV
OFF
RREEZE
RREEZE
OFF
B
＆
W
B
＆
W
OFF
STA B
STA B
OFF
COL BAR
COL BAR
OFF
SRZ MOD
SRZ MOD
OFF
The preceding function options are in the OFF state by default.
Note: If the camera cannot be used normally or the
parameters are abnormal, it is recommended to restore
the default values.
四、Remote control debugging instructions
①HOME button: Press once to bring the lens to the starting point.

②CAMERA: Switches the address of the control camera, which must
correspond to the dip switch of the camera. After the switch, you can set the
camera.
③Auto focus button: You can directly use this key to control the one-button
focus of the camera.
④Manual focus mode: Press this key to switch the camera's focus mode to
manual focus mode.
⑤4K signal switch key: Use this key to switch to 4K30 signal with one click
(after setting, you need to restart the camera to make it take effect).
⑥1080 i50 Signal Switch key: Use this key to switch to 1080 i50 signal with one
key (After setting, you need to restart the camera for the setting to take effect).
⑦Single white balance: This button is pressed once to achieve a white balance.
⑧Single focus: This button is pressed once to achieve one focus.
⑨Single Stop: This button is pressed once to achieve one stop exposure.
⑩Adjust camera focus: + for pull in - for pull out.
⑪Focus button: After the automatic focus is changed to manual focus，
⑫Adjust aperture：Change the shutter speed
⑬Menu key: You can open all the function options of the camera. All the contents of the
camera instructions can be manipulated from the options.
⑭Up, down, left and Right keys: After entering the menu interface, you can select the
contents of the menu by pressing the up, down, left and right keys.
⑮Ok key: Press this key to confirm after selecting the option.
⑯CALL key: Select the confirm key for the preset point.
⑰SET key: Confirm key for setting camera preset points.
⑱CLEAR key: Confirm key to clear preset points.
⑲Preset point selection key: 9 groups of preset points can be selected.

Steps to set preset points.
⑴Position the camera.
⑵Select one of the keys 1-9.
⑶Press the SET key to complete the setting.
Invoke the preset point step：
⑴Select the prefab bit key that was set earlier.
⑵Press the CALL key and the camera lens will return to the preset position.
Clear preset point step：
⑴Select the preset key you want to delete.
⑵Click the CLEAR key to complete the clearing
After the camera is started, the lens is not in the starting position (the camera
will be in the center position after the camera is started). Firstly, press the 0 key,
and then press the CLEAR key to power off and restart the camera. After the
camera is started, the lens will return to the middle position.
五、Packing list
When opening the package, please check all the attachments that came
with it.

Camera control all-in-one machine, packing case, instruction manual
(electronic file), warranty card, certificate of qualification
六、After-sales service
Dear users, in order to ensure that you fully enjoy the quality service, please carefully read the
following product service regulations.
The company provides limited warranty and lifetime repair service.
1. The warranty period is 12 months from the date of sale. During the limited warranty period, you will enjoy
free warranty service for product faults, which will be repaired by the user or sent to the company (faults
caused by improper use, human failure or irresistible causes are not covered by the warranty). 2. In the
limited warranty period of more than 12 months, the fault of the product will be paid lifetime maintenance
service.
1. Maintenance response time
2. From the date when users send products to the company, 24-hour response service, switchboard
telephone：[phone]。
3. Before sending the product back to our company, please contact the relevant technical personnel of our
company in advance and then send the product back to our company. Otherwise, the maintenance is not
timely, so as not to affect your use。