Kinivo BTH260 User manual

Support & Troubleshooting
Online : http://support.kinivo.com
Email : [e-mail]
Designed in USA.
Assembled in China.
Quick Reference Guide
BTH260
For your convenience, we have included most common
instructions in this quick reference guide. Detailed user manual
is available for download at http://downloads.kinivo.com in
the following languages:
FCC ID:2AEUVBTH260

Headphones overview
Bluetooth pairing
1. Ensure that the Kinivo BTH260 headphones are powered
on.
2. Press and hold the multifunction button for 6 seconds until
the blue and red lights start ashing alternatively. The voice
prompt will say “Pairing”.
3. Locate and pair to “Kinivo BTH260” on your computer or
mobile device. Play audio from your paired Bluetooth
capable device.
Windows Vista, 7, 8.1, 10
a. After putting the BTH260 headphones in pairing mode,
from the system tray’s Bluetooth menu, choose “Add a
Device”.
b. When “Kinivo BTH260” appears in the list of available
devices, double-click it and wait for Windows to congure it.
Windows 8
a. Find and open “Add a Bluetooth Device” using the Search
1. On/O switch
2. Multifunction (Play/Pause, Pairing, Answer/End call)
3. Volume -
4. Volume +
5. Next track
6. Previous track
7. Charging port

charm.
b. Click “Kinivo BTH260” in the device list, then click “Pair”.
Mac OS
a. From the Bluetooth menu, choose “Open Bluetooth
Preferences”.
b. Click the “Pair” button beside “Kinivo BTH260”.
Apple iPhone / iPad
Settings > Bluetooth (On) > then select“Kinivo BTH260”to pair.
Android
Settings > Wireless & Networks > Bluetooth Settings (enabled)
> Scan for Devices, then select “Kinivo BTH260” to pair.
Answering calls
1. Press the center Play/Pause button to answer any incoming
phone call.
2. Press the same button to cancel any ongoing call.
Factory reset
WARNING: Performing a factory reset on the BTH260 will
delete any previous pairings and will restore the headphones
to factory default settings. Only perform this if you are
experiencing any issues with the product. (This procedure
can only be done while no audio is playing and cannot be
performed during a phone call)
1. Power o the BTH260 headphones.
2. Press and hold “–” and the multifunction button
simultaneously for 8 seconds. The blue LED will blink purple
twice.
3. The next time the BTH260 is powered on it will automatically
enter pairing mode.
Note: After factory reset, you will need to remove the previous
BTH260 pairing from your Bluetooth device and repeat the
pairing process.

We invite you to share your Kinivo
experience on Amazon, social
media, or directly with us, by
texting “Kinivo” to 601-620-0006
Connect with us on social media:
@Kinivo
How are we doing?

FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Note: Modifications to this product will void the user’s authority to operate this equipment.