Kino Flo Celeb 850 User manual

Operation Manual
Celeb 850 LED DMX
Part No. 3100109 Rev A 02-08-2018

2
Celeb 850 LED DMX Fixture
Included w/ Celeb 850
CEL-850CU Celeb 850 LED DMX Center, Univ
CEL-850YU Celeb 850 LED DMX Yoke, Univ
CEL-850PU Celeb 850 LED DMX Pole-Op, Univ
LVR-CE890 Celeb 850 Louver-Honeycomb, 90°
Celeb 850 Center Mount
Celeb 850 Yoke Mount
Celeb 850 Pole-Op

Celeb 850 LED DMX Kits
KIT-C850U
Celeb 850 LED DMX Center Mount Kit, Univ
Kit Contents:
1 Celeb 850 LED DMX Center Mount
1 Ship Case
Weight: 74 lb (34kg)
Dimensions: 52 x 10 x 30.5” (132 x 25 x 77cm)
KIT-C850YU
Celeb 850 LED DMX Yoke Mount Kit, Univ
Kit Contents:
1 Celeb 850 LED DMX Yoke Mount
1 Jr. Pin
1 Ship Case
Weight: 78 lb (35kg)
Dimensions: 53.5 x 10 x 36” (136 x 25 x 91cm)
3
Celeb 850 LED
DMX Center Kit
Celeb 850 LED
DMX Yoke Kit

4
Celeb 850 Center Mount
The Celeb 850 Center Mount allows the xture to mount to a junior stand or
hang from a pipe grid with junior pipe clamp.
The Center Mount includes a Junior Stand Adapter (MTP-V63JR) which can be
mounted onto a junior stand.
Center Mount Rotation and Tilt Controls
1) The black knob controls the tilt.
2) The gold lock lever controls the rotation of the xture.
3) For further control, the center mount also rotates at 90° stops. Pull locking pin
and turn counter-clockwise to unlock. When the xture rotates to a 90° angle,
the xture will “click” into place. To lock into place, turn locking pin to the right.
(MTP-V63JR)

5
Center Mount Hanging Adapter
The Celeb 850 Center Mount can also hang from
a junior pipe hanger using a Hanging Adapter
(MTP-V63H1), sold separately.
Remove the Junior Pin (MTP-V63JR) and attach the
Hanging Adapter. It is held in place by a safety screw
and a set screw. A lock knob adjusts rotation of the
arm.
(MTP-V63H1)
Center Mount Rigging
The mount ttings are U.S. industry standard 1 ¼”
ttings and are “Speed Rail” compatible. They accept
a 1 5/8” outside diameter pipe.
These ttings enable custom frames to be constructed
for special rigging applications such as multiple xture
hangs.

Yoke Mount
The Celeb 850 Yoke Mount has a ½” hole to accept indus-
try standard hardware.
The Yoke Mount xtures can hang from a junior pipe
hanger using a Junior Pin Assembly for Yoke (MTP-I80),
sold separately.
MTP-I80
Warning: Use only M5 X 10mm screws (supplied) to
assemble yoke. Note that threads on the xture are
self-locking and may seem tight.
Replacement screws: Part No. 2020127
Recommended torque setting:
USA: 18 lb-in
Metric: 2 Nm
Celeb 850 Pole-Op
The Celeb 850 Pole-Op xture includes a yoke with an
attached junior pin.
It can be hung from a grid with a junior pipe hanger.
Junior pin attached to Pole-Op Yoke
6

Operating Pole-Op
The Blue cup alters the Pan (left or right).
The White cup alters the Tilt (up or down).
Warning!
Do not pull yoke to adjust tilt. Turn the white knob counter
clockwise to angle the yoke 90°.
(ParaBeam shown for illustration purposes only.)
7

Inserting Louver
The Celeb includes spring loaded accessory holders to hold the Honeycomb Louver.
Place the long edge of the Honeycomb Louver into the lower channel.
Press down on the left and right corners of the Louver and slip the upper edge into the
upper channel of the xture. To remove, reverse the procedure.
Note: Do not press down along the top center portion of the Louver. Doing so may
deform the Louver over repeated usage.
SnapBag & SnapGrid
The SnapBag accessory is a lightweight fabric tailor-made
for the Celeb LED. It slips over the xture and is attached
with straps. The reective material intensies the soft light.
The removable Magic cloth or Grid cloth attaches to the inside
with Velcro.
The SnapGrid accessory is constructed of pre-stretched
reproof fabric with a built-in stainless steel frame. It unfolds
and snaps into place. This model requires the use with the
corresponding SnapBag; it is not designed to be used by itself.
8

9
Inserting Barndoors
Position the barndoors
alongside the extruded
edge of the xture. Align the
thumbscrews with the adjust-
able receptacle holes in the
xture and insert into place.
Lock the barndoors by turning
the silver thumbscrew.
To remove, reverse the
procedure.
For replacement screws,
use M5 Metric size screws.
Note: To adjust the place-
ment of the receptacle holes,
use a pointed tool (such as
a pen) to slide the holes
within the extruded edge.
BRD-CE8
Fixture Power
AC Input
The Celeb is powered AC and includes an IEC
connection. A locking power cord is included with
the xture. To remove the plug, move the red tab
to release. The xture has a built-in power supply
with universal input from 100-240VAC.
Ambient Operating Temperature
The Celeb is designed to operate at temperatures from 14°F to 104°F (-10°C to 40°C).
Note:
The Celeb 850 Center Mount is shown for example purposes only. The IEC power
cords for the Celeb 850 Yoke Mount and Pole-Op are in a different location.

10
Control Panel - White Mode
ABCD E F G H
A) On /Off: On = Green light displayed. Off = Red light displayed. The display and
all menu settings can be operated while the power button is in the Off position,
as long as power is applied to the controller. The On /Off button only controls the
light source.
B) Menu: Provides access to menu options such as General settings, Reset, DMX and
DMX Wireless settings. Tip: While on control screen, press and hold for 3 seconds to
switch through menus (White, Gels & Hue, RGB).
C) Kelvin & G/M (Green/Magenta) Preset Buttons: Factory defaults left to right are:
2700K, 3200K, 5000K and 6500K. G/M default value is 000. User can also use
these preset buttons to store custom Kelvin and G/M settings.
D) Display: Provides access to Dim, Kelvin, G/M, and DMX channel.
Factory reset will show: Dim = 10%, Kelvin = 2700K, G/M = 000, DMX = 001.
E) Lock: Press the Lock button to disable all buttons and control knob.
Press for 3 seconds to restore presets to default factory settings.
F) Mode: Press to navigate from Dim to Kelvin and G/M settings. When in sub-menus,
pressing Mode always returns you to main display. When DMX is applied, use Mode
to access DMX channel on main display. Tip: Long press will bring you back one step.
G) Data Port: Mini B USB for software updates.
H) Dimmer Knob: Manually adjusts Dim, Kelvin, G/M levels and DMX address.
Press the knob to toggle between ne and coarse adjustments or when selecting
options within menus.
DMX Note: Each Celeb LED has an “AUTO TERMINATE” feature. The last xture that
does not have an XLR cable attached to the DMX “Out” port will automatically
terminate.

11
Control Panel - Color Mode
A B C D
A) Menu: Provides access to menu options such as General settings (Color Mode),
Reset, DMX and DMX Wireless settings. Tip: While on control screen, press and
hold for 3 seconds to switch through menus (White, Gels & Hue, RGB).
B) Kelvin, G/M (Green/Magenta) Gel, Hue & Saturation Preset Buttons:
Factory defaults left to right are: 2700K, 3200K, 5000K and 6500K. G/M default
value is 000. User can also use these preset buttons to store custom Kelvin
between 2500K and 9900K and custom G/M, Gel, Hue and Saturation settings.
C) Display: Provides access to Dim, Kelvin, G/M, Gel, Hue/Saturation and DMX
channel. Factory reset will show: Dim = 10%, Kelvin = 2700K, G/M = 000,
DMX = 001.
D) Mode: Press to navigate from Dim to Kelvin, G/M, Gel, Hue and Saturation
settings. When in sub-menus, pressing Mode always returns you to main display.
When DMX is applied, use Mode to access DMX channel on main display.
Tip: Long press will bring you back one step.
Color Mode

12
A) Menu: Provides access to menu options such as General settings (RGB Mode),
Reset, DMX and DMX Wireless settings. Tip: While on control screen, press and
hold for 3 seconds to switch through menus (White, Gels & Hue, RGB).
B) Kelvin, G/M (Green/Magenta) RGB (Red, Green, Blue) Preset Buttons: Factory
defaults left to right are: 2700K, 3200K, 5000K and 6500K. G/M default value is 000.
User can also use these preset buttons to store custom Kelvin between 2500K and
9900K and custom G/M, and RGB settings.
C) Display: Provides access to Dim, Kelvin, G/M, RGB and DMX channel. Factory reset
will show: Dim = 10%, Kelvin = 2700K, G/M = 000, DMX = 001.
.
D) Mode: Press to navigate from Dim to Kelvin, G/M, RGB settings. When in
sub-menus, pressing Mode always returns you to main display. When DMX is
applied, use Mode to access DMX channel on main display.
Tip: Long press will bring you back one step.
For full operation manual, see www.kinoo.com
RGB Mode
Control Panel - RGB Mode
A B C D

13
Accessories
MTP-I80 Junior Pin Assembly for Yoke (28mm)
MTP-V63JR Celeb 850 Center Junior Mount
Assembly (28mm)
(Included w/ Center Mount Fixture)
MTP-V63H1 Celeb 850 Center Hanging Adapter
(28mm)
MTP-V63C Celeb 850 Center Mount Assembly
(Included w/ Center Mount Fixture)
BRD-CE8 Celeb 850 Barndoors (Set of 4)
DFS-CE800-S Celeb 850 SnapBag w/ 2 x Diffusion
LVR-CE860 Celeb 850 Louver-Honeycomb, 60°
LVR-CE840-S Celeb 850 SnapGrid, 40°

14
CEL-850CU Celeb 850 LED DMX Center Mount, Univ
AC Input Voltage: 100~240VAC 50/60Hz, 575W
Amperage VAC: 5.0A at 120VAC, 2.5A at 230VAC
Kelvin Range: 2700K~6500K (White Mode)
2500K~9900K (Color Mode)
Dimming Range: 100%~1%
Weight: 40 lb (18kg)
Dimensions: 45 x 6 x 25.5”
(114 x 15 x 65cm)
CEL-850YU Celeb 850 LED DMX Yoke Mount, Univ
AC Input Voltage: 100~240VAC 50/60Hz, 575W
Amperage VAC: 5.0A at 120VAC, 2.5A at 230VAC
Kelvin Range: 2700K~6500K (White Mode)
2500K~9900K (Color Mode)
Dimming Range: 100%~1%
Weight: 38 lb (17kg)
Dimensions: 50 x 5 x 28”
(127 x 13 x 71cm)
CEL-850PU Celeb 850 LED DMX Pole-Op, Univ
AC Input Voltage: 100~240VAC 50/60Hz, 575W
Amperage VAC: 5.0A at 120VAC, 2.5A at 230VAC
Kelvin Range: 2700K~6500K (White Mode)
2500K~9900K (Color Mode)
Dimming Range: 100%~1%
Weight: 38 lb (17kg)
Dimensions: 50 x 5 x 28”
(127 x 13 x 71cm)
Fixture Specications
Celeb 850 LED
DMX Center
Celeb 850 LED
DMX Yoke
Celeb 850 LED DMX
Pole-Op
7010051 Celeb 850 Pole-Op Assembly
(Included w/ Pole-Op Fixture)
7010050 Celeb 850 Yoke Assembly
(Included w/ Yoke Fixture)

15
For latest Warranty information and Certications,
see Kino Flo website at www.kinoo.com.
Environmental: Disposal of Old Electrical & Electronic Equipment.
This symbol on the product or on its packaging indicates that this
product shall not be treated as household waste. This product is made
of recyclable materials and should be disposed of in accordance with
governmental regulations.
Kino Flo, Inc. 2840 N. Hollywood Way, Burbank, CA 91505, USA
Tel: [phone] website: www.kinoo.com
FCC Part 15 Verication:
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition
that this device does not cause harmful interference.
FCC Part 15 Declaration of Conformity:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
KINO FLO, INC
Celeb 850 LED
ID: XRSCRMXTIMO101
IC: 8879A-CRMXT101