Kioti CS2610 User manual

FORWARD
Make sure to read this manual carefully and keep it reading accessible future reference.
When leasing or transferring this tractor, deliver this manual together with the tractor.
The specications in this manual are subject to change without notice.
< NOTE >
Congratulations, and welcome to the fabulous world of CS2610 ownership, where serious work is made fun
again!
This versatile tractor is a culmination of the entire tractor and diesel knowledge gained by the Daedong In-
dustrial Co.,LTD, since 1947 and has been designed with the finest materials, and quality control standard.
Knowledge of tractor operation is essential for many years of dependable service and reliability. To help new
owners familiarize themselves with the CS2610, it is the policy of KIOTI tractor to provide an owner's manual
which includes helpful information about tractor safety, operation and maintenance. If the information you seek
is not found in this manual, your KIOTI tractor dealer will be happy to help you.
Please feel free to contact DAEDONG-IND.CO.,LTD. with your questions/concerns.
M46-EU,AU-00.indd 1 2012-01-19 오후 1:46:47

This manual was compiled in compliance with the ISO 3600 standards and the instructions contained here comply with
the requirements of the Machinery Directive 2010/52/EU in force in the European Community. For tractors sold or used
outside the European Community, local laws will prevail.
Main protections on the tractors discussed in this manual.
DESCRIPTION NON CABIN REMARK
1. ROPS (protection against overturning) Yes
2. FOPS (protection against objects falling from above) No
3. OPS (protection against penetration of objects from sides)
protection against hazardous chemicals
No
(CategoryⅠ)
ISO 3600 EU STANDARDS
M46-EU,AU-00.indd 2 2012-03-08 오후 6:40:19

SAFETY PRECAUTIONS ................................
PRECAUTIONS BEFORE OPERATION .........
SPECIFICATIONS ............................................
DESCRIPTION OF OPERATING SYSTEM .....
OPERATION ....................................................
3- POINT HITCH IMPLEMENT OPERATION ..
MAINTENANCE ...............................................
STORAGE AND DISPOSAL ............................
TROUBLESHOOTING .....................................
INDEX ...............................................................
SECTION
1
2
3
4
5
6
7
8
9
10
TABLE OF CONTENTS
M46-EU,AU-00.indd 3 2012-01-19 오후 1:46:47

TABLE OF CONTENTS
SAFETY PRECAUTIONS ....................................1-1
PRECAUTIONS BEFORE OPERATION .................. 1-2
GENERAL PRECAUTIONS............................................. 1-2
PRECAUTIONS DURINg OPERATION................... 1-5
WHEN STARTING THE ENGINE .................................... 1-5
WHEN DRIVING THE TRACTOR ................................... 1-9
WHEN PARKING THE TRACTOR ................................ 1-10
WHEN OPERATING THE P.T.O .................................... 1-10
WHEN USING THE 3-POINT HITCH .............................1-11
SAFETY PRECAUTIONS DURINg SERvICINg ... 1-12
SAFETY PRECAUTIONS WhEN USINg ThE LOADER .. 1-15
SAFETY DECAL MAINTENANCE ......................... 1-18
DECAL MOUNTING LOCATION ................................... 1-18
DECALS ........................................................................ 1-19
CAUTIONS FOR DECAL MAINTENANCE ................... 1-22
PRECAUTIONS BEFORE OPERATION .............2-1
vEhICLE IDENTIFICATION NUMBER..................... 2-2
PRODUCTION NUMBER ................................................ 2-2
ENGINE NUMBER .......................................................... 2-2
TRANSMISSION NUMBER............................................. 2-2
ESSENTIAL REPLACEMENT PARTS.................... 2-4
OILS AND FLUIDS .......................................................... 2-4
FILTERS .......................................................................... 2-4
BELTS AND RUBBER PARTS......................................... 2-5
OTHER COMPONENTS ................................................. 2-5
SPECIFICATIONS................................................3-1
gENERAL SPECIFICATIONS .................................. 3-2
EXTERNAL DIMENSIONS .............................................. 3-2
MAJOR SPECIFICATIONS ............................................. 3-3
IMPLEMENT LIMITATIONS...................................... 3-6
STANDARD SIZE BY IMPLEMENT................................. 3-6
M46-EU,AU-00.indd 4 2012-01-19 오후 1:46:47

TABLE OF CONTENTS
CRUISE LAMP (OPTIONAL)........................................ 4-15
LOW RANGE INDICATOR (IF EQUIPPED) .................. 4-16
NEUTRAL INDICATOR (IF EQUIPPED) ....................... 4-16
HIGH RANGE INDICATOR (IF EQUIPPED) ................. 4-16
OPERATINg ThE CONTROLS ............................. 4-17
HST RANGE GEAR SHIFT LEVER .............................. 4-18
BRAKE PEDAL.............................................................. 4-18
PARKING BRAKE LEVER .......................................... 4-19
FRONT WHEEL DRIVE LEVER.................................... 4-19
FORWARD/REVERSE DRIVING PEDALS................... 4-20
HAND THROTTLE LEVER........................................... 4-20
DIFFERENTIAL LOCK PEDAL...................................... 4-21
PTO SHIFT LEVER ....................................................... 4-22
CUTTING HEIGHT ADJUSTMENT LEVER .................. 4-22
PTO CLUTCH LEVER................................................... 4-23
SEAT ADJUSTMENT..................................................... 4-24
hYDRAULIC SYSTEM ........................................... 4-25
POSITION CONTROL LEVER ...................................... 4-25
LIFTING ARM (LOWER LINK) SPEED CONTROL LEVER .. 4-26
DOUBLE ACTING LEVER (OPTIONAL) ....................... 4-26
DESCRIPTION OF OPERATINg SYSTEM .........4-1
ExTERIOR vIEW...................................................... 4-3
MOUNTING LOCATION .................................................. 4-4
KEY SWITCH .................................................................. 4-4
COMBINATION SWITCH ................................................ 4-6
HAZARD LAMP SWITCH ................................................ 4-8
CRUISE OPERATION SWITCH (OPTIONAL) ................ 4-8
INSTRUMENT PANEL ............................................ 4-10
VIEW.............................................................................. 4-10
TACHOMETER/HOUR METER INDICATOR .................4-11
FUEL GAUGE.................................................................4-11
ENGINE COOLANT TEMPERATURE GAUGE............. 4-12
ENGINE OIL PRESSURE WARNING LAMP ................ 4-12
BATTERY CHARGING LAMP ....................................... 4-13
HEAD LIGHT HIGH BEAM INDICATOR........................ 4-13
TURN SIGNAL LAMP.................................................... 4-14
GLOW PLUG INDICATOR ............................................ 4-14
PARKING BRAKE WARNING LAMP............................. 4-14
P.T.O INDICATOR (IF EQUIPPED)................................ 4-15
4WD ENGAGED INDICATOR (IF EQUIPPED) ............ 4-15
M46-EU,AU-00.indd 5 2012-01-19 오후 1:46:48

AUXILIARY PORT (OPTIONAL).................................... 4-27
PTO SHAFT COVER & CAP ........................................ 4-27
ACCESSORY SYSTEM .......................................... 4-27
CUP HOLDER .............................................................. 4-27
TOOL BOX..................................................................... 4-28
TIRES, WhEELS AND BALLAST .......................... 4-28
INFLATION PRESSURE .............................................. 4-29
TREAD ........................................................................ 4-30
WHEEL TORQUE AND DIRECTION............................. 4-30
ADDITIONAL WEIGHT (OPTIONAL) ........................... 4-31
OPERATION ........................................................5-1
PRE-OPERATION..................................................... 5-2
INITIAL OPERATION................................................ 5-3
OPERATINg ThE ENgINE ...................................... 5-3
STARTING THE ENGINE ................................................ 5-3
ENGINE CHECK LAMPS ................................................ 5-7
STOPPING THE ENGINE ............................................... 5-8
WARMING UP ................................................................. 5-8
JUMP STARTING THE ENGINE ..................................... 5-9
OPERATINg ThE TRACTOR................................. 5-10
DRIVING........................................................................ 5-10
FOLDING THE ROPS ................................................... 5-13
RAISING THE ROPS TO UPRIGHT POSITION ........... 5-14
PARKING....................................................................... 5-15
TURNING ...................................................................... 5-16
DRIVING ON SLOPE .................................................... 5-17
CAUTIONS CONCERNING PAVED ROAD .................. 5-17
PRECAUTIONS WHILE DRIVING ON THE ROAD ...... 5-18
LOADING INTO AND UNLOADING OUT OF THE TRUCK .. 5-19
POWER STEERING PRECAUTIONS........................... 5-19
3-POINT HITCH CONTROL SYSTEM .......................... 5-21
EXTERIOR HYDRAULIC CONTROL SYSTEM (OPTIONAL) .. 5-23
3-POINT hITCh IMPLEMENT AND
LOADER OPERATION .....................................6-1
REMOvAL AND INSTALLATION OF 3-POINT
hITCh IMPLEMENT (WITh P.T.O ShAFT) ........... 6-2
TABLE OF CONTENTS
M46-EU,AU-00.indd 6 2012-01-19 오후 1:46:48

MOWER IMPLEMENT..................................................... 6-2
HOW TO USE.................................................................. 6-5
OPERATION TIP FOR 3-POINT hITCh ELEMENTS6-6
ADJUSTMENT OF LIFT ROD ........................................ 6-6
ADJUSTMENT OF TOP LINK ........................................ 6-7
ADJUSTMENT OF STABILIZER ..................................... 6-7
DRAFT HITCH AND TRAILER ........................................ 6-8
INSTALLING PTO SHAFT............................................... 6-9
hANDLINg LOADER ............................................ 6-11
DRIVING ON SLOPE .................................................... 6-12
JOYSTICK LEVER ........................................................ 6-13
HPL VALVE.................................................................... 6-16
MAINTENANCE...................................................7-1
MAINTENANCE ChECK LIST ................................. 7-2
DAILY CHECK CHART.................................................... 7-2
MAINTENANCE SCHEDULE CHART............................. 7-3
LUBRICANTS ........................................................... 7-6
MAINTENANCE CODE ............................................ 7-7
HOW TO DISCONNECT THE HOOD (A)....................... 7-7
OPENING SIDE COVER (B) ........................................... 7-7
CHECKING AND ADDING FUEL (C) .............................. 7-8
CHECKING TRANSMISSION FLUID LEVEL (D)............ 7-9
CHECKING ENGINE OIL LEVEL (E) ............................ 7-10
CHECKING COOLANT LEVEL (F).................................7-11
CLEANING GRILL, RADIATOR SCREEN (G) .............. 7-12
CHECKING BRAKE PEDALS (H) ................................. 7-12
CHECKING GAUGES,
METER AND EASY CHECK LAMPS (I)..................... 7-12
CHECKING HEAD LIGHT, HAZARD LIGHT ETC. (J)... 7-12
CHECKING SEAT BELT AND ROPS (K)....................... 7-12
CHANGING ENGINE OIL AND REPLACING FILTER (L) .. 7-13
REPLACING TRANSMISSION FLUID AND FILTER (M) .. 7-15
CHANGING FRONT AXLE CASE OIL (N)..................... 7-17
ADJUSTING BRAKE PEDAL (O) .................................. 7-18
LUBRICATING GREASE FITTINGS (P)........................ 7-19
CHECKING WHEEL BOLT/NUT TORQUE (Q) ............. 7-20
REPLACING AIR CLEANER PRIMARY ELEMENT (T).. 7-20
CHECKING FUEL LINES (U) ........................................ 7-21
TABLE OF CONTENTS
M46-EU,AU-00.indd 7 2012-01-19 오후 1:46:48

TABLE OF CONTENTS
BLEEDING FUEL SYSTEM (AK) .................................. 7-22
ADJUSTING FAN BELT TENSION (V).......................... 7-22
BATTERY (W)................................................................ 7-23
CHECKING INTAKE AIR LINE (X) ................................ 7-25
ADJUSTING TOE-IN (Y) ............................................... 7-26
CHECKING RADIATOR HOSE AND CLAMP (Z).......... 7-26
POWER STEERING LINE (AA)..................................... 7-27
ADJUSTING ENGINE VALVE CLEARANCE (AE) ........ 7-27
REPLACING AIR CLEANER FILTER (AF) ................... 7-28
FLUSH COOLING SYSTEM AND
CHANGING COOLANT (AJ) ...................................... 7-28
ANTI-FREEZE ............................................................... 7-30
REPLACING FUSE (AN)............................................... 7-30
SLOW BLOW FUSE (AP).............................................. 7-32
REPLACING BULB (AQ)............................................... 7-33
STORAgE AND DISPOSAL................................8-1
TRACTOR STORAgE .............................................. 8-2
DAILY STORAGE ............................................................ 8-2
LONG-TERM STORAGE................................................. 8-2
USINg TRACTOR AFTER STORAgE..................... 8-3
USAgE AND DISPOSAL.......................................... 8-4
TROUBLEShOOTINg.........................................9-1
ENgINE TROUBLEShOOTINg ............................... 9-2
TRACTOR TROUBLEShOOTINg ........................... 9-4
INDEx.................................................................10-1
M46-EU,AU-00.indd 8 2012-01-19 오후 1:46:48

This manual includes information titled as WARNING, CAUTION, IMPORTANT
and NOTE. These titles indicate the following:
SAFETY AND vEhICLE DAMAgE WARNINg
NOTE
This indicates that interesting or helpful information is being
provided.
This indicates that a condition may result in damage to your
vehicle or its equipment if the caution is not heeded. Follow
the advice provided with the caution.
WARNING
This indicates that a condition may result in harm, serious
injury or death to you or other persons if the warning is not
heeded. Follow the advice provided with the warning.
!
This mark indicates emphasis on notable characteristics of
working procedures, and information about technology for
easier operation.
IMPORTANT
CAUTION
M46-EU,AU-00.indd 9 2012-01-19 오후 1:46:49

Various universal symbols have been used on the instruments and controls of your KIOTI tractor. Below is a
list of the universal symbols and their meanings.
UNIvERSAL SYMBOLS
Fuel-level
Parking Brake
Battery Charging Condition
Engine Oil-pressure
Turn Signal
Power Take-off Clutch Control-
on Position
Differential Lock
Hazard Warning Lights
Headlight-high Beam
Four-wheel Drive-on
Preheat
H: High Speed Travel Light
L: Low Speed Travel Light
Neutral Position
h
L
N
M46-EU,AU-00.indd 10 2012-01-19 오후 1:46:51