Kiramek TSL20plus User manual
INSTALLATION GUIDE ON BACK
PRECAUTIONS
PLEASE READ THOROUGHLY BEFORE USE
The included wire harness and connectors are specially made for the TSL20plus only.
Please do not splice off the CAN or POWER wires, and do not use this harness or
connector with any other device; otherwise, a short, fire, or vehicle breakdown may occur.
WARNING
DANGER Mishandling may cause bodily harm!
•This product locks and unlocks car doors only by car speed and gear position. This
device will NOT unlock doors due to shock, impact, airbag inflation or car accidents.
•
This product must only be used in compatible cars that have an Automatic Transmission.
Installing into a manual/stick-shift vehicle could cause bodily harm or vehicle damage.
•
NEVER install this product in the vehicle where it could obstruct moving parts like foot
pedals, levers, gears, the steering mechanism, etc. Such obstruction could cause bodily
harm, vehicle damage, and/or product damage.
•NEVER modify this product in any way. Such modifications could result in malfunction
or situations where bodily harm, vehicle damage, and/or product damage could occur.
•ALWAYS install in accordance with this document. Non-standard installations can result
in situations where bodily harm, vehicle damage, and/or product damage could occur.
•This product is not waterproof, splash-proof, or dust-proof. Take care to prevent water,
dirt, oil and other impurities from entering the product; otherwise malfunction to the
product could occur, as well as vehicle damage and possible bodily harm.
•
caught or smashed by something, resulting in an electric short that could cause damage
to the product, to the car, and/or bodily harm.
OPERATIONAL NOTES
NOTE Product or vehicle failure could result from ignoring the following:
•This product is primarily intended for use on Japanese vehicles within Japan.
•NEVER store or mount this product where water, oil, dirt, or moisture collects, or where
there is intense heat or steam present. Such may cause product failure.
•This product is primarily intended for sale at domestic Japanese car dealerships.
•
Our company shall not be held liable for traffic accidents that occur with the TSL20 installed.
•Specifications of this product are subject to change without notice.
•ALWAYS confirm that your installer has appropriate expertise and equipment to safely
and properly install this product.
•This product does not have any safety features that will unlock doors in the event of a car
accident or strong shock. Do not rely on this product for door unlocking in thoses cases!
•This product only Locks the doors when the vehicle speed exceeds 20~25km/h and
Unlocks doors when the gear is shifted back to the “P” (Park) position. It also Unlocks 9
seconds after very hard braking while traveling at 20km/h or faster. But please note there is
no Relock feature if you Unlock while driving faster than 20km/h.
•
TSL20plus automatically Locks. That is because some TOYOTA cars are designed to show
a slightly higher speed on the speedometer relative to the actual speed of the car.
•
The TSL20p is not intended for use on manual transmission cars, even if you find it works.
•The TSL20plus shall not be used as an excuse by the user for traffic accidents, nor shall
any blame be assigned to our company for such accidents.
•In some rare cases, brief noise may appear on your automotive TV (if powered by the car).
Operational Voltage
Absolute Max./Min. Voltages
Current Consumption
Oper. Ambient Temp. Range (no condensation)
+12Vdc
+9Vdc ~+30Vdc
<4.5mA (while CAN sleeping)
–25°C ~+85°C
PRODUCT SPECIFICATIONS
COMPATIBLE CARS
Install the TSL20plus only in the vehicles listed below. Do not install in vehicles not
listed, as such could pose a hazard to the product, to the car, and/or to the human body.
•iQ [#GJ10]
•RAV4 [ACA3#W]
•AQUA (Prius-C) [NHP10#]
•AURION (Camry) [NZT260, ZRT26#]
•IST (Scion xD) [NCP11#, ZSP110]
•WISH [ZGE2#G, ZGE2#W]
•VITZ (Yaris) [NCP9#, SCP90, KSP90, KSP130, NCP131]
•VANGUARD [ACA33W, GSA33W]
•VOXY [ZRR7#G, ZRR7#W]
•AURIS [E15#H, E18#H]
•Corolla AXIO [NZE14#, ZRE14#, NZE16#, ZRE16#]
•Corolla FIELDER [NZE14#G, ZRE14#G, NZE16#G, ZRE16#G]
•Corolla RUMION (Rukus) [NZE151N, ZRE15#N]
•SPADE [P14#]
•NOAH [ZRR7#G, ZRR7#W]
•PRIUS [ZVW3#]
•PRIUS-PHV [ZVW3#]
•PRIUS[ZVW4#]
•BLADE [AZE15#H, GRE156H]
•PREMIO [NZT260, ZRT26#]
•BELTA (Vios) [KSP92, SCP92, NCP96]
•PORTE [P14#]
•MARK X ZiO [ANA1#, GGA10]
•RACTIS [NCP10#, SCP100, NSP120]
•LAND CRUISER [URJ202W] {Also Locks when placed in Reverse gear.}
WARRANTY TERMS
1) Warranty period is measured as one (1) year from date of purchase.
2) In the unlikely event of product failure during normal use (as defined by this manual), the product will be repaired
or replaced free of charge, but only at the original dealer/place of purchase. Demand for onsite repairs may be met in
some cases within Japan, but onsite service fees will apply and vary by location.
3) All warranty claims must be submitted through the vendor from whom you originally purchased this product. You
must fill out the form on the front page of this manual, and submit the dated purchase receipt.
4) You can only submit warranty claims to us if you have moved and can no longer visit your TSL20 dealer.
5) Customer bears the cost of removal/reinstallation fees, as well as return shipping if not hand-delivered.
6) Regardless of being covered under Warranty, the following cases resulting in malfunction will require a fee:
•Oil, water, dust, etc. having accumulated inside and on the electronics.
•Improper installation or carelessness by the user.
•Unauthorized product repair or modification.
•Accidental drops, falls or other strong impact.
•Fire, earthquake, flood, lightening, tornadoes, other natural disasters, as well as pollution, salt-air damage, etc.
•When used outside the intended use, as specified in this manual.
•Car accidents, vandalism or theft.
•
•And cases where you do not properly fill out your claim, provide false info., and/or lack a dated receipt.
7) This warranty is only valid for TSL20 users outside Japan with express written approval from KIRAMEK.
8) We cannot reissue printed documents free of charge. Please keep this document safe and do not lose it.
Product repair or replacement is guaranteed under the terms, conditions and duration of this warranty. This warranty
does not limit your legal rights. If you have questions or problems after this one (1) year warranty has expired, please
consult with the original dealer from whom you purchased the TSL20 product.
Because your warranty claim will be invalidated by an improperly filled out PRODUCT WARRANTY CLAIM card,
please carefully confirm all entries and/or consult with your TSL20 dealer before submission.
PLEASE NOTE:
Ver. 08172015
TOYOTA AUTO LOCK SYSTEM
TSL20plus MANUAL
Thank you for purchasing the TSL20plus Auto Lock System. Please read this manual in its
entirety before using the product. Be sure to store this manual in a safe place, as you may
need to reference it in the future.
NOTE#1: Even if your car is on the above chart, a “minor change” by the car manufact-
urer on the newest car model could cause the CAN signals to become incompatible with
the TSL20+. Please visit our TSL20 web page for the newest edition compatibility chart.
NOTE#2: If you own a Toyota car outside Japan, we cannot guarantee compatibility if
your Toyota was not manufactured in Japan. CAN signals could be different.
• Doors automatically Lock when car speed exceeds 20km/h.
• Doors automatically Unlock when gear returned to “P” position.
Doors also Unlock 9 seconds after you brake hard while driving
20km/h or faster, after which doors will relock when accelerat-
ing to more than 20km/h.
NOTE#1: This product will not automatically Unlock in the event of a car accident.
NOTE#2: After you move the gear from “P” (park) to “D” (drive), if you manually Lock
or Unlock the doors before the car speed reaches 20km/h, this product will not
NOTE#3: After the TSL20plus auto-locks your doors, if you manually Unlock, the
TSL20plus will not relock your doors.
PRODUCT OPERATION
Newest Data Here
(TSL20 web page)
TSL20plus INCLUDED PARTS
Controller
OBD
Harness
Harness Length: 1 meter
NOTE: The RED & WHT 2-pin connectors, as well as the connector on the back side near the
DIP switch block, are not used. Please do not connect anything to them.
PRODUCT WARRANTY CLAIM
TSL20plusTOYOTA Auto Lock System
1 YEAR (validated only by dealer and/or dated proof of purchase)
Year: , Month: , Day:
Name:
Address:
Phone: Email:
Name:
Address:
Phone: Website:
Approval Stamp
Manufacturer:
Contact TEL:
KIRAMEK, Inc.
9-183-1 Itayama-cho,
Handa-shi, Aichi-Ken 475-0936 JAPAN
+81-569-20-5585 ( )
Operating Hours (ex. Sat./Sun./Holidays):
10:00AM ~ NOON, 1:00PM ~ 4:00PM
PRODUCT DESC.:
Warranty Period:
Date of Purchase*:
Customer Info.*:
* Please fill in these marked sections above completely.
NOTE: Warranty Claims not accepted without valid
Approval Stamp and/or dated proof of purchase.
Seller Info.*:
MODEL:
1 2 3 4 5 6
AQUA (Prius C*) [NHP10]
AURION (Camry*) [NZT260, ZRT26#] (Oct.2014 & later)
AURIS [E18#H]
Corolla Axio [NZE16#G]
Corolla Fielder [E16#G]
ESQUIRE [R8#, including hybrids]
iQ [#GJ10]
LAND CRUISER PRADO [J15#W]
NOAH [R8#, including hybrids]
PORTE [P141#]
PREMIO [NZT260, ZRT26#] (Oct.2014 &later)
PRIUS [ZVW30]
PRIUS-PHV [ZVW3#]
PRIUSα [ZVW4#]
RACTIS [NSP120]
SIENTA [P17#G]
SPADE [P14#]
VITZ [KSP130, NCP131] ***
VOXY [R8#, including hybrids]
WISH [ZGE2#G, ZGE2#W]
*
Car name outside Japan. TSL20 should work if these cars were made in Japan, but we have not confirmed compatibility.
*** Vitz (Yaris) cars manufactured June 2015 or later which have "Toyota Safety Sense C" are NOT compatible.
AURION (Camry*) [NZT260, ZRT26#] (to Sep.2014)
PREMIO [NZT260, ZRT26#] (to Sep.2014)
AURIS [NZE15#H, ZRE15#H]
BLADE [AZE15#H, GRE156H]
Corolla AXIO [NZE14#]
Corolla Fielder [E14#G]
Corolla RUMION (Rukus*) [NZE151N, ZRE15#N]
IST [NCP11#, ZSP110]
LAND CRUISER [URJ202W]
MARK X ZiO [ANA1#, GGA10]
NOAH [ZRR7#G, ZRR7#W]
RACTIS [NCP10#, SCP100]
VOXY [ZRR7#G, ZRR7#W]
VITZ (Yaris*) [NCP9#, SCP90, KSP90]
RAV4 [ACA3#W]
VANGUARD [ACA33W, GSA33W]
BELTA (Vios*) [KSP92, SCP92, NCP96]
Corolla AXIO [ZRE14#]
FAMILY
1
2
3
4
5
6
1
ON
2 3 4 5 6
1
ON
2 3 4 5 6
1
ON ON
2 3 4 5 6
1
ON
2 3 4 5 6
1
ON ON
2 3 4 5 6
DIP SWITCHES
Find your car in the table below and adjust the
DIP switches accordingly.
The location of the DIP switches is shown in the
diagram at right.
VEHICLE SELECTION
1
3-STEP INSTALLATION
2
Set vehicle compatibility DIP switch to match your car.
Use DIP SW#6 to confirm CAN signal compatibility.
Refer to “VEHICLE SELECTION” below.
Refer to “OBD CONNECTION” at right.
Refer to “VEHICLE CONFIRMATION” at bottom right.
1
3
OBD plug: choosing which side wires exit
You can choose which
side the wires exit.
TSL20p WIRE HARNESS
OBD PIN-OUTS
Color Description
+12V
GND
CAN-HI
CAN-LO
RED
BLK
BRN
BRN/RED
pin16pin14
CAN-LO +12V
GROUND CAN-HI
pin6pin4
OBD CONNECTION
2
9
1
9
1
If you already used the
included wire-tie, you will
need to remove it so you
can slide off the OBD cap. NOTE: When finished, secure
the wires to the tab on the
cap using a small wire-tie.
Slide off the
cap as shown.
Pull wires to the opposite
side and put cap on
as shown.
9
1
OPTIONAL
PARTS
0.65~0.8mm
PosiTap 4-pack
MRSP ¥
Compatible Wire:
Screw off
both caps.
Insert car wire into
Slot of cap. Screw
body onto cap.
Strip off 10mm of
insulation. Insert
through cap.
Insert wire first
into body. Screw
on cap tightly.
PosiTap
body
0.65~0.8mm, Car’s OBD wire
TSL20 wire
Slot
USING POSI-TAPS
Once you have completed all 3 Steps correctly, you simply need to
hide the TSL20p controller away from view and ensure you mount it
so it does not interfere with the foot pedals or the car’s moving parts.
At that point, your installation is complete!
DIP Switch #6 must be used as shown below to enable the TSL20p to function on
the chosen car. (DIP Switches #1 ~ #5 should have been set for your car in Step-1.)
NOTE: When the above steps are finished, you never need to do them again for
But if you move the TSL20p to a different car, you need to match the DIP Switches to
that car and then repeat the above 3 steps.
1
ON
2 3 4 5 6
1
2
3
Turn on the Ignition.
Flip DIP SW #6 to ON.
6
Flip DIP SW #6 to OFF.
6
FINAL SETUP
3
L
O
C
K
A
C
C
O
N
S
T
A
R
T
COMPATIBLE VEHICLES DIP Setting
NOTE:
OB-23
splitter cable, or you can purchase our Posi-Tap connector 4-pack (p/n
NT-4
to know how many badly soldered connections result in problems!
800
Other Kiramek Lock manuals
