KitchenAid 5KSM7580XC User manual

5KSM7580XC
5KSM6583C
5KSM7590C
W11266857B.indb 1 11/13/2018 1:05:51 PM

2 |
TABLE OF CONTENTS
PARTS AND FEATURES ............................................................................3
Parts And Accessories ............................................................................ 3
STAND MIXER SAFETY ............................................................................4
Important Safeguards ............................................................................. 4
Electrical Requirements .......................................................................... 6
USING THE STAND MIXER.......................................................................7
Speed Control Guide.............................................................................. 7
Accessory Guide ..................................................................................... 8
Operating The Speed Control ................................................................ 8
Beater To Bowl Clearance....................................................................... 9
Optional Attachments........................................................................... 10
ASSEMBLING YOUR BOWL LIFT STAND MIXER....................................11
TIPS FOR GREAT RESULTS .....................................................................12
Mixing Tips............................................................................................ 12
CARE AND CLEANING ..........................................................................13
TROUBLESHOOTING.............................................................................13
W11266857B.indb 2 11/13/2018 1:05:51 PM

PARTS AND FEATURES | 3
ENGLISH
PARTS AND ACCESSORIES
Speed
Control
Lever
Bowl Lift Lever
(not shown)
Beater Shaft
Stainless Steel
Wire Whip
Stainless
Steel Bowl*
Spiral Dough
Hook
Flat Beater
Locating
Pins
Bowl
Support
Beater Height
Adjustment
Screw
Motor Head Attachment Hub
(see the
“Optional
Attachments”
section)
Attachment
Knob
Pouring Shield**
PARTS AND FEATURES
Flex Edge Beater**
*Capacity and handle design vary by model.
**Included with select models only. Also available as an optional accessory.
W11266857B.indb 3 11/13/2018 1:05:53 PM

4 | STAND MIXER SAFETY
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety
precautions should always be followed, including the
following:
1. Read all instructions. Misuse of appliance may result
in personal injury.
2. To protect against risk of electrical shock, do not put
Stand Mixer in water or other liquid.
3. This appliance is not intended for use by persons
(including children) with reduced physical, sensory, or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
4. Turn the appliance OFF, then unplug from the outlet
when not in use, before assembling or disassembling
parts and before cleaning. To unplug, grasp the plug
and pull from the outlet. Never pull from the power
cord.
5. Avoid contacting moving parts. Keep hands, hair,
clothing, as well as spatulas and other utensils away
from beater during operation to reduce the risk of
injury to persons and/or damage to the Stand Mixer.
STAND MIXER SAFETY
W11266857B.indb 4 11/13/2018 1:05:53 PM

STAND MIXER SAFETY | 5
ENGLISH
STAND MIXER SAFETY
6. Do not operate any appliance with a damaged cord
or plug or after the appliance malfunctions or has
been damaged in any manner. Return appliance to the
nearest Authorised Service Centre for examination,
repair, or adjustment.
7. The use of attachments not recommended or sold by
KitchenAid may cause re, electrical shock or injury.
8. Do not use the Stand Mixer outdoors.
9. Do not let the cord hang over the edge of table or
counter.
10. Remove at beater, wire whip, or dough hook fro
Stand Mixer before washing.
11. Children should be supervised to ensure that they do
not play with the appliance.
12. If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent, or similarly
qualied persons in order to avoid a hazard.
13. Never leave the appliance unattended while it is in
operation.
14. To avoid product damage, do not use the Stand Mixer
bowls in areas of high heat such as an oven,
microwave, or on a stovetop.
15. Refer to the “Care and Cleaning” section for
instructions on cleaning the surfaces in contact with
food.
16. This appliance is intended to be used in household
and similar applications such as:
- staff kitchen areas in shops, ofces, or other working
environments;
- farmhouses;
- by clients in hotels, motels and other residential
type environments;
- bed and breakfast type environments.
SAVE THESE INSTRUCTIONS
W11266857B.indb 5 11/13/2018 1:05:53 PM

6 | STAND MIXER SAFETY
STAND MIXER SAFETY
Volts: 220-240 A.C. only.
Hertz: 50-60
The power rating for your Stand Mixer
is printed on the trim brand or on the
serial plate.
Do not use an extension cord. If the
power supply cord is too short, have
a qualified electrician or service
technician install an outlet near the
appliance.
ELECTRICAL REQUIREMENTS
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
W11266857B.indb 6 11/13/2018 1:05:53 PM

USING THE STAND MIXER | 7
ENGLISH
USING THE STAND MIXER
All speeds have a feature that
automatically starts the Stand Mixer at
a lower speed to help avoid ingredient
splash-out and “flour puff” at start-up,
then quickly increases to the selected
speed for optimal performance.
SPEED USED FOR ACCESSORIES DESCRIPTION
1Stirring
For slow stirring, combining,
mashing, starting all mixing
procedures. Use to add flour and
dry ingredients to batter, and add
liquids to dry ingredients. Do not
use speed 1 to mix or knead yeast
doughs.
2Slow Mixing,
Kneading
For slow mixing, mashing, faster
stirring. Use to mix and knead yeast
doughs, heavy batters, and candies;
start mashing potatoes or other
vegetables; cut shortening into
flour; mix thin or splashy batters.
4Mixing,
Beating
For mixing semi-heavy batters, such
as cookies. Use to combine sugar
and shortening and to add sugar to
egg whites for meringues. Medium
speed for cake mixes.
6Beating,
Creaming
For medium-fast beating (creaming)
or whipping. Use to finish mixing
cake, doughnut, and other batters.
High speed for cake mixes.
8-10
Fast Beating,
Whipping,
Fast Whipping
For whipping cream, egg whites,
and boiled frostings. For whipping
small amounts of cream, egg
whites or for final whipping of
mashed potatoes.
NOTE: Use speed 2 to mix or knead yeast doughs. Use of any other speed creates high
potential for Stand Mixer failure.
SPEED CONTROL GUIDE
W11266857B.indb 7 11/13/2018 1:05:55 PM

8 | USING THE STAND MIXER
USING THE STAND MIXER
Flat beater for normal to heavy mixtures:
cakes
creamed frostings
candies
cookies
pie pastry
biscuits
quick breads
meat loaf
mashed potatoes
Wire whip for mixtures that need air incorporated:
eggs
egg whites
heavy cream
boiled frostings
sponge cakes
angel food cakes
mayonnaise
some candies
Dough hook for mixing and kneading yeast doughs:
breads
rolls
coffee cakes
buns
ACCESSORY GUIDE
Flat beater
Wire whip
Dough hook
OPERATING THE SPEED CONTROL
Do not scrape bowl while Stand Mixer
is operating. The bowl and beater are
designed to provide thorough mixing
without frequent scraping. Scraping
the bowl once or twice during mixing is
usually sufficient. Turn Stand Mixer off
before scraping.
NOTE: The Stand Mixer may warm up
during use. Under heavy loads with
extended mixing time, you may not be
able to comfortably touch the top of the
Stand Mixer. This is normal.
If the Stand Mixer becomes overloaded,
it will automatically shut off to prevent
damage. See “Auto-Reset Motor
Protection.”
W11266857B.indb 8 11/13/2018 1:05:55 PM

USING THE STAND MIXER | 9
ENGLISH
USING THE STAND MIXER
BEATER TO BOWL CLEARANCE
Your Stand Mixer is adjusted at the factory so the flat beater just clears the bottom
of the bowl. If, for any reason, the flat beater hits the bottom of the bowl or is too
far away from the bowl, you can correct the clearance easily.
1. Unplug Stand Mixer or disconnect
power.
2. Place bowl lift lever in down position.
3. Attach flat beater.
4. Adjust so flat beater just clears bottom
surface of bowl when in lifted position
by turning screw counterclockwise
to raise the bowl and clockwise to
lower the bowl. Just a slight turn is all
that is required: the screw will not
rotate more than 1/4 turn (90 degrees)
in either direction. (The full range of
adjustment is 1/2 turn, or 180
degrees.)
5. Place bowl lift lever in up position
to check clearance.
6. Repeat steps 4 and 5 if necessary.
NOTE: When properly adjusted, the flat
beater will not strike on the bottom or
side of the bowl. If the flat beater or the
wire whip is so close that it strikes the
bottom of the bowl, the beater or whip
may wear.
A
Lower Bowl
Raise Bowl
W11266857B.indb 9 11/13/2018 1:05:55 PM

10 | USING THE STAND MIXER
USING THE STAND MIXER
OPTIONAL ATTACHMENTS
KitchenAid offers a wide range of optional attachments such as the Spiralizer, Pasta Cut-
ters, or Food Grinders that may be attached to the Stand Mixer attachment power shaft
as shown here.
1Check to be sure that the Stand
Mixer is unplugged, and the speed
control is turned to “0”. 2Turn the attachment knob
counterclockwise to remove
attachment hub cover.
3
Insert attachment into attachment
hub, making certain that attachment
power shaft fits into the square
attachment hub socket. It may be
necessary to rotate the attachment
back and forth. When it is in the
proper position, the pin on the
attachment will fit into the notch
on the hub rim.
4
Tighten the attachment knob
by turning it clockwise until the
attachment is completely secured
to the Stand Mixer. See the
“Instructions” manual that came
with your attachment for detailed
directions on using the attachment.
NOTE: Make sure attachment knob
is securely tightened after removal or
replacement of attachments.
W11266857B.indb 10 11/13/2018 1:05:56 PM