KitchenAid 5KPM50 User manual

STAND MIXER
BATEDEIRA DOMÉSTICA

Table of Contents
Important Safety Instructions ..........................................................................................3
Electrical Requirements for Brazil Only ...........................................................................4
About Your Mixer
Tilt Head Mixer Features..........................................................................................5, 6
Bowl Lift Mixer Features..........................................................................................7, 8
Using Your KitchenAid Attachments ...........................................................................9
Beater-to-Bowl Clearance ...........................................................................................9
Care and Cleaning of Your Mixer .................................................................................9
Planetary Mixing Action.............................................................................................10
Mixer Use..................................................................................................................10
Speed Control Guide..................................................................................................10
Mixing Tips....................................................................................................................11
Mixing and Kneading Yeast Dough ......................................................................11, 12
Egg Whites................................................................................................................12
Whipped Cream.........................................................................................................12
Before You Call For Service ...........................................................................................13
2

English
3
Important Safety Instructions
When reading the Instructions Manual…
Pay special attention to sections marked by
the following words:
These help you avoid accidents that could lead to
injury for someone using the product incorrectly.
These help you avoid damage to the product
and/or other property.
“NOTE” or “IMPORTANT”
These sections give you helpful tips on using the
product.
wWARNING
wWARNING
wCAUTION
SAVE THESE INSTRUCTIONS
TO REDUCE THE RISK OF FIRE,ELECTRICAL SHOCK, INJURY
TO PERSONS, OR DAMAGE WHEN USING THE MIXER,
FOLLOW BASIC PRECAUTIONS, INCLUDING THE FOLLOWING:
1. Read all instructions.
2. To protect against risk of electrical shock,
never immerse mixer in water or other liquid.
3. Be sure that the prongs on the plug of the
unit mate with the electrical wall receptacle
into which it will be plugged. Observation of
proper grounding techniques and local
electrical codes is required.
4. Children should be supervised to ensure
that they do not play with the appliance.
5.Switch off the appliance and disconnect from
supply before changing accessories or
approaching parts that move in use.
6. Avoid contacting moving parts. Keep hands,
hair, clothing, as well as spatulas and other
utensils away from beater during operation
to prevent injury, and/or damage to the
mixer.
7. Do not operate mixer unattended or near
edge of work surface. When used for heavy
loads or at high speeds, mixer may move on
work surface.
8. Remove flat beater, wire whip, or dough
hook from mixer before washing.
9. Do not operate any appliance with a
damaged cord set or after the appliance has
been dropped or damaged in any manner.
Return appliance to the nearest authorized
service center for examination, repair, or
adjustment.
10. The use of attachments not recommended
by KitchenAid may cause fire, electrical
shock, or injury.
11. Do not use outdoors.
12. Do not let cord hang over edge of table
or counter, or touch hot surfaces.
13. When using a mixer model with a tilt
head, the head must be completely down
before locking. Before mixing, make sure
lock is in position by attempting to raise
head.
14. Do not use an extension cord.
15. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
16. When making dough with the mixer,
never operate mixer continuously for
more than 10 minutes.
17. Be careful when lifting mixer as it is
heavy.
18. Use the mixer only for its intended
function.
19. ELECTRICAL REQUIREMENTS: Your
KitchenAid Mixer operates on a regular
220-240 volt A.C., 50-60 hertz house
current. The wattage rating for your
KitchenAid Mixer is printed on the trim
band.This wattage is determined by using
the attachment that draws the greatest
power. Other recommended attachments
may draw significantly less power.
20. Be certain the attachment hub is secure
(tighten attachment knob) prior to using
mixer to avoid any possibility of the
attachment hub falling into the bowl
during mixing.

4

Tilt Head Mixer Features
R-5
5
Motor Head
Motor Head
Locking Lever
(not shown)
Attachment Knob
Attachment Hub
Flat Beater
Wire Whip
Dough Hook
Speed
Control
Lever
Bowl Clamping late
Beater Shaft
4.8 L (5 Qt)
Stainless
Steel Bowl
Motor Head
English

TO LOCK MOTOR HEAD IN RAISED OSITION
• Push locking lever into UNLOC position
and hold.
• Tilt motor head back.
• Move locking lever into LOC position.
TO LOCK MOTOR HEAD IN O ERATING
OSITION
• Push locking lever into UNLOC position
and hold.
• Lower motor head until it is completely
down into operating position.
• Move locking lever into LOC position.
• Before mixing, test motor head lock by
attempting to raise head.
NOTE: Motor head should always be kept
in LOC position when using mixer.
TO O ERATE CONTROL S EED
• Speed control lever should always be set
on lowest speed for starting, then gradually
moved to desired higher speed to avoid
splashing ingredients out of bowl. See
“Speed Control Guide.”
0 1 2 4 6 8 10
6
TO ATTACH BOWL
• Be sure speed control is OFF.
• Tilt motor head back.
• Place bowl on bowl-clamping plate.
• Turn bowl gently in clockwise direction
(see picture above).
• Sit pouring shield on bowl.*
* If Pouring Shield is included
TO REMOVE BOWL
• Turn speed control to OFF.
• Tilt motor head back.
• Turn bowl in counterclockwise direction.
TO ATTACH FLAT BEATER,
WIRE WHI , OR DOUGH HOOK
• Turn speed control to OFF and unplug.
• Raise motor head.
• Slip beater onto beater shaft and press
upward as far as possible.
• Turn beater to right, hooking beater
over pin on shaft.
TO REMOVE FLAT BEATER,
WIRE WHI , OR DOUGH HOOK
• Turn speed control to OFF and unplug.
• Raise motor head.
• Press beater upward as far as possible and
turn left.
• Pull beater from beater shaft.
KitchenAid
St.Joseph,Michigan,USA
0 1 246810
OFF ON

7
Motor Head
Bowl Lift Handle
(not shown)
Spring Latch and
Bowl in
(not shown)
Attachment
Knob
Attachment Hub
Locating ins
Wire Whip Flat Beater
Dough Hook
Speed Control
Lever
Bowl Support
Beater
Shaft
4.8 L (5 Qt) Stainless
Steel Bowl
Bowl Lift Mixer Features
English

TO RAISE BOWL
• Rotate handle back and up until it snaps
into the locked vertical position.
• Bowl must always be in raised, locked
position when mixing.
TO LOWER BOWL
• Rotate handle back and down.
TO ATTACH FLAT BEATER,
WIRE WHI , OR DOUGH HOOK
• Turn speed control to OFF and unplug.
• Lower bowl by rotating bowl lift handle
downward.
• Slip flat beater on beater shaft and press
upward as far as possible.
• Turn beater to right, hooking beater over the
pin on shaft.
TO REMOVE FLAT BEATER,
WIRE WHI , OR DOUGH HOOK
• Turn speed control to OFF and unplug.
• Lower bowl by rotating bowl lift handle
downward.
• Press beater upward as far as possible and
turn left.
• Pull beater from beater shaft.
TO O ERATE S EED CONTROL
• Speed control lever should always be set on
lowest speed for starting, then gradually
moved to desired higher speed to avoid
splashing ingredients out of bowl. See
“Speed Control Guide.”
OVERLOAD RESET BUTTON
(Model 5K M50 only)
• If the mixer is overloaded, the Overload
Reset Button will pop out and the mixer will
shut off. Turn the Speed Control Lever to
OFF. Wait a few minutes, then push in the
Overload Reset Button. Turn the Speed
Control Lever to the desired speed and
continue mixing.
8
TO ATTACH BOWL
• Be sure speed control is OFF.
• Place bowl lift handle in down position.
• Fit bowl supports over locating pins.
• Press down on back of bowl until bowl pin
snaps into spring latch.
• Sit pouring shield* on bowl.
• Raise bowl before mixing.
TO ATTACH OURING SHIELD*
1. Turn speed control to OFF.
2. Unplug Stand Mixer or disconnect power.
3. Attach Flat Beater, Dough Hook, or Wire
Whip and bowl.
4. From the front of the mixer, slide the Pouring
Shield over the bowl until the shield is
centered. The bottom rim of the shield
should fit within the bowl.
TO REMOVE OURING SHIELD
1. Turn speed control to OFF.
2. Unplug Stand Mixer or disconnect power.
3. Lift the front of the Pouring Shield clear
of the bowl rim and pull forward.
4. Remove attachment and bowl.
TO USE OURING SHIELD
1. For best results, rotate the shield so the
motor head covers the “u” shaped gap in
the shield. The pouring chute will be just to
the right of the attachment hub as you face
the mixer.
2. Pour the ingredients into the bowl through
the pouring chute.
* If Pouring Shield is included
NOTE: Check that bowl and pouring shield are
properly in place.
TO REMOVE BOWL
• Place bowl lift handle in down position.
• Grasp bowl handle and lift straight up and
off locating pins.
0 1 2 4 6 8 10

9
Flat Beater, for normal to heavy mixtures,
such as:
cakes biscuits
creamed frostings crumpets
candies meat loaf
cookies mashed potatoes
pie pastry
Dough Hook for mixing and kneading yeast
doughs, such as:
breads coffee cakes
rolls buns
Using Your KitchenAid Attachments
Beater-to-Bowl Clearance
Wire Whip for mixtures that need
to incorporate air, such as:
eggs sponge cakes
egg whites mayonnaise
heavy cream some candies
boiled frostings
Tilt Head
•Lift motor head.
•Turn screw (A) slightly to the left to raise
flat beater and to the right to lower flat
beater.
•Make adjustment with flat beater, so it just
clears surface of bowl.
Your mixer is adjusted at the factory so that
the flat beater just clears the bottom of the
bowl. If, for any reason, the flat beater strikes
the bottom of the bowl, or is too far away
from the bowl, clearance can be corrected as
follows:
A
Bowl Lift
•Place bowl lift handle
in down position.
•Turn screw (B) slightly to
the left to raise flat beater
and to the right to lower
flat beater.
•Make adjustments with
flat beater, so it just clears surface of bowl.
NOTE: Flat beater must not strike on bottom or side
of bowl when properly adjusted. If beater or wire
whip is adjusted too close so that it strikes bottom
of bowl, coating may wear off of beaters or wires
may wear through on wire whip.
Scraping sides of bowl may be necessary under
certain conditions regardless of beater adjustment.
Mixer must be stopped to scrape bowl or damage
to mixer may occur.
Bowl, flat beater, and dough hook may be
washed in an automatic dishwasher. The wire
whip and these other basic accessories can be
cleaned thoroughly in hot sudsy water and
rinsed completely before drying.
Lubrication: Motor bearings are self-
lubricating and should require no further
attention under normal use.
ELECTRICAL SHOCK HAZARD
ALWAYS BE SURE TO UNPLUG
MIXER BEFORE CLEANING TO AVOID
POSSIBLE ELECTRICAL SHOCK.
Wipe mixer with a damp cloth. DO
NOT IMMERSE IN WATER. Wipe off
beater shaft frequently, removing any
residue that may accumulate.
wWARNING
Care and Cleaning of Your Mixer
B
Your mixer is adjusted at the factory so that
the flat beater just clears the bottom of the
bowl. If, for any reason, the flat beater strikes
the bottom of the bowl, or is too far away
from the bowl, clearance can be corrected as
follows:
See the Stand Mixer Attachments Use and Care Guide for speed settings and operating times.
English

10
Planetary Mixing Action
Speed Control Guide
PERSONAL INJURY HAZARD
To avoid personal injury and damage
to the beater, do not attempt to scrape
bowl while mixer is operating; turn
mixer off. Should scraper or other
object drop into bowl, turn motor
OFF before removing.
wWARNING
The bowl and beater are designed to provide
thorough mixing without frequent scraping.
Scraping the bowl once or twice during mixing
is usually sufficient.
The mixer may warm up during use. Under
heavy loads with extended mixing time, you
may not be able to comfortably touch the top
of the unit. This is normal.
Your KitchenAid Mixer will mix faster and
more thoroughly than most other electric
mixers. Therefore, the mixing time in most
recipes must be adjusted to avoid overbeating.
During operation, the flat
beater moves around the
stationary bowl, at the
same time turning in the
opposite direction on its
own axis. The diagram
shows the complete
coverage of the bowl made
by the path of the beater.
NUMBER OF SPEED
1 STIR For slow stirring, combining, mashing, starting all mixing
procedures. Use to add flour and dry ingredients to batter, add
liquids to dry ingredients, and combine heavy mixtures.
2 SLOW MIXING For slow beating, mashing, faster stirring. Use to beat heavy
batters and candies, start mashing potatoes or other vegetables,
cut shortening into flour, beat thin or splashy batters, and mix
and knead yeast dough. Use with Can Opener attachment.
4 MIXING, BEATING For mixing semi-heavy batters such as cookies. Use to cream
sugar and shortening and add sugar to egg whites for meringues.
Medium speed for cake mixes. Use with attachments: Food
Grinder, Rotor Slicer/Shredder, and Fruit/Vegetable Strainer.
6 BEATING, For beating or creaming, medium fast whipping. Use to finish
CREAMING mixing cakes, doughnut, and other batters. High speed for cake
mixes. Use with Citrus Juice attachment.
8 FAST BEATING, For whipping cream, egg whites, and boiled frostings.
WHIPPING
10 FAST For whipping small amounts of cream and egg whites. Use with
WHIPPING Pasta Maker and Grain Mill attachments.
NOTE: The Speed Control Lever can be set between the above speeds if a finer adjustment is required.
Mixer Use

NOTE: If liquid ingredients are added too
quickly, they will form a pool around the
dough hook and slow down mixing process.
4. Continuing on speed 2, gently tap
remaining flour around sides of bowl,
125 mL at a time, as needed. Mix until
dough clings to hook and cleans sides
of bowl, about 2 minutes.
Mixing Tips
Mixing and Kneading Yeast Dough
11
NOTE: If ingredients in very bottom of bowl
are not thoroughly mixed, the beater is not far
enough into the bowl. See “Beater to Bowl
Clearance.”
Cake Mixes
When preparing packaged cake mixes, use
Speed 4 for medium speed and Speed 6 for
high speed. For best results, mix for the time
stated on the package directions.
Adding Nuts, Raisins
or Candied Fruits
Solid materials should be folded in the last
few sections of mixing on Stir Speed. The
batter should be thick enough to keep the
fruits and nuts from sinking to the bottom of
the pan during baking. Sticky fruits should be
dusted with flour for better distribution in the
batter.
Liquid Mixture
Mixtures containing large amounts of liquid
ingredients should be mixed at lower speeds
to avoid splashing. Increase speed only after
mixture has thickened.
Converting Your Recipe to the Mixer
The mixing instructions found in this book can
be used to convert your favorite recipes for use
with your KitchenAid Mixer.
To help determine a mixing procedure, your
own observations and experience will be
needed. Watch the batter or dough and mix
only until it has the desired appearance
described in your recipe, such as “smooth and
creamy.” Use the “Speed Control Guide” to
help determine proper mixing speeds.
Adding Ingredients
The standard procedure to follow when mixing
most batters, especially cake and cookie
batters, is to add:
1/3 dry ingredients
1/2 liquid ingredients
1/3 dry ingredients
1/2 liquid ingredients
1/3 dry ingredients
Use Stir Speed until ingredients have been
blended. Then gradually increase to desired
speed.
Always add ingredients as close to side of
bowl as possible, not directly into moving
beater. The Pouring Shield can be used to
simplify adding ingredients.
1. Place all dry ingredients including yeast into
bowl, except last 250 mL to 500 mL flour.
2. Attach bowl and dough hook. Lock Tilt Head
down or raise Bowl Lift Handle to up
position. Turn to Speed 2 and mix about
15 seconds or until ingredients
are combined.
3. Continuing on Speed 2, gradually add liquid
ingredients to flour mixture, about 30 seconds
to 1 minute. Mix 1 minute longer.
English

Egg Whites
Whipped Cream
12
Place room temperature egg whites in clean,
dry bowl. Attach bowl and wire whip. To avoid
splashing, gradually turn to designated speed
and whip to desired stage. See chart below.
Amount Speed
1 egg white Gradually to 10
2-4 egg whites Gradually to 8
6 or more egg whites Gradually to 6
WHI ING STAGES
Frothy:
Large, uneven air bubbles.
Begin to hold shape:
Air bubbles are fine and compact; product
is white.
Pour cream into chilled bowl. Attach bowl and
wire whip. To avoid splashing, gradually turn
to designated speed and whip to desired
stage. See chart below.
Amount Speed
59 mL Gradually to 10
118 mL Gradually to 10
236 mL Gradually to 8
472 mL Gradually to 8
WHI ING STAGES
Begins to thicken:
Cream is thick and custard-like.
5. When dough clings to hook, knead on
Speed 2 for 2 minutes or until dough
is smooth and elastic.
6. Unlock and raise Tilt Head or lower bowl
on Bowl Lift and remove dough from hook.
NOTE: These instructions illustrate bread
making with the Rapid Mix method. When
using the conventional method, dissolve yeast
in warm water in warmed bowl. Add remaining
liquids and dry ingredients – except last
250 mL to 500 mL flour. Turn to Speed 2
for about 1 minute, or until ingredients are
thoroughly mixed. Proceed with steps
4 through 6.
Holds its shape:
Cream forms soft peaks when wire whip
is removed. Can be folded into other
ingredients when making desserts and sauces.
Stiff:
Cream stands in stiff, sharp peaks when wire
whip is removed. Use for topping on cakes or
desserts, or filling for cream puffs.
NOTE: Watch cream closely during whipping;
there are just a few seconds between
whipping stages. DO NOT OVERWHIP.
Soft peak:
Tips of peaks fall over when wire whip is
removed.
Almost stiff:
Sharp peaks form when wire whip is
removed, but whites are actually soft.
Stiff but not dry:
Sharp, stiff peaks form when wire whip is
removed. Whites are uniform in color and
glisten.
Stiff and dry:
Sharp, stiff peaks form when wire whip is
removed. Whites are speckled and dull in
appearance.

Before You Call For Service
lease read the following before calling
your service center.
1. The mixer may warm up during use. Under
heavy loads with extended mixing time
periods, you may not be able to comfortably
touch the top of the unit. This is normal.
2. The mixer may emit a pungent odor,
especially when new. This is common with
electric motors.
3. If flat beater strikes bowl, stop the mixer.
See “Beater-to-Bowl Clearance.”
If your mixer should malfunction or fail to
operate, please check the following:
1. Is your mixer plugged in?
2. Is the fuse in the circuit to the mixer in
working order? If you have a circuit breaker
box, be sure the circuit is closed.
3. Are the bowl and pouring shield* properly
in place?
4. Model 5 PM50 is equipped with an
overload device. If the mixer is overloaded,
the Overload Reset Button will pop out and
the mixer will shut off (see page 7). Turn the
Speed Control Lever to OFF. Wait a few
minutes, then push in the Overload Reset
Button. Turn the Speed Control Lever to the
desired speed and continue mixing.
HOW TO OBTAIN SERVICE:
All service should be handled locally by an
authorized itchenAid Service Center. Contact
the dealer from whom the unit was purchased
to obtain the name of the nearest authorized
itchenAid service facility.
*Included with some models.
Specifications subject to change without notice.
13
English

Índice
Instruções de segurança importantes ...........................................................................15
Requistos elétricos para Brasil somente........................................................................16
Sobre seu batedeira
Características da batedeira de cabeçote inclinável ............................................17, 18
Características do sistema ″bowl-lift″com levantamento da tigela .....................19, 20
Uso dos seus acessórios KitchenAid
...................................................................... 21
Espaço livre entre o batedor e a tigela......................................................................21
Manutenção e limpeza da sua batedeira...................................................................21
Ação de mistura planetária........................................................................................22
Uso da batedeira.......................................................................................................22
Guia de controle de velocidade .................................................................................22
Dicas de misturas .........................................................................................................23
Misturando e amassando massa com fermento........................................................23
Claras em neve .........................................................................................................24
Chantilly....................................................................................................................24
Antes de solicitar assistência técnica............................................................................25
Termo de garantia.........................................................................................................26
14

Português
15
Instruções de segurança importantes
Ao ler o manual de instruções…
Preste uma especial atenção às seções
marcadas pelas seguintes palavras:
Ajuda a evitar acidentes que podem provocar
ferimentos a alguém que esteja usando o produto
de forma incorreta.
Ajuda a evitar danos ao produto e /ou outros bens.
“NOTA” ou “IMPORTANTE”
Estas seções fornecem dicas úteis sobre como usar
o produto.
wADVERTÊNCIA
wADVERTÊNCIA
wAVISO
GUARDE ESTAS INSTRUÇÕES
PARA REDUZIR O RISCO DE INCÊNDIO,CHOQUE ELÉTRICO,
FERIMENTOS EM PESSOAS,OU DANOS QUANDO USAR A
BATEDEIRA, SIGA AS PRECAUÇÕES BÁSICAS, INCLUINDO
AS SEGUINTES:
1. Leia todas as instruções.
2. Para se proteger contra o risco de choque elétrico,
nunca mergulhe a batedeira em água ou outro
líquido.
3. Certifique-se de que os pinos do plugue da unidade
se encaixem na tomada elétrica na qual serão
ligados. É necessária a observação das técnicas
de aterramento apropriadas e os códigos elétricos
locais.
6. Evite o contato com as peças móveis. Mantenha
as mãos, o cabelo, a roupa, bem como as espátulas
e outros utensílios distantes dos batedores durante
a operação para evitar ferimentos e/ou danos à
batedeira.
7. Não deixe a batedeira funcionando enquanto estiver
ausente ou perto da extremidade da superfície
de trabalho. Quando usada para recargas pesadas
ou em alta velocidade, a batedeira pode mover-se
na superfície de trabalho.
8. Remova o batedor plano, o batedor de claras
ou o batedor tipo ″gancho″da batedeira antes
de lavar.
9. Não opere nenhum aparelho com o fio ou o plugue
danificado, ou após ter sofrido queda, ou ter
apresentado qualquer tipo de defeito. Leve o
aparelho ao centro de serviço autorizado mais
próximo para avaliação, reparo ou ajuste.
10. O uso de acessórios não recomendados pela
KitchenAid pode causar incêndio, choque elétrico ou
ferimento.
11. Não use a batedeira ao ar livre.
12. Não deixe o fio pendurado sobre a extremidade
da mesa ou balcão, ou encostado em superfícies
quentes.
13. Ao usar um modelo de batedeira com cabeça
inclinável, a cabeça deve estar completamente
para baixo antes de ser travada. Antes de iniciar
o funcionamento, certifique-se de que a trava
esteja na posição, tentando levantar a cabeça.
14. Não use um fio de extensão.
16. Ao fazer massas na batedeira, nunca deixe
a batedeira funcionando continuamente por mais
de 10 minutos.
17. A batedeira por ser pesada, então tenha cuidado
ao levantá-la.
18. Use a batedeira somente para a finalidade
pretendida.
19. REQUISÍTOS ELÉTRICOS: A sua batedeira
KitchenAid funciona em tensão e frequência
de funcionamento residencial de 220-240 VCA
e 50-60 hertz, respectivamente.A classificação
da potência para a sua batedeira KitchenAid
está impressa na etiqueta de identificação. Esta
potência é determinada usando o acessório que
consome a maior energia elétrica. Outros
acessórios recomendados podem
significantemente consumir menos energia.
20. Certifique-se de que a tampa do bocal de encaixe
dos acessórios esteja segura (aperte o parafuso
para fixação dos acessórios) antes de utilizar
a batedeira para evitar qualquer possibilidade
da tampa do bocal de encaixe dos acessórios
caia dentro da tigela durante a mistura.
Desligue o produto e tire da tomada antes de
trocar qualquer acessório ou se aproximar de
qualquer parte que se movimente quando em uso.
5.
Tome muito cuidado quando usar qualquer
eletroportátil próximo de crianças.
4.
15. Este aparelho não se destina à utilização por
pessoas (inclusive crianças) com capacidades
físicas, sensoriais ou mentais reduzidas,
ou por pessoas com falta de experiência
e conhecimento, a menos que tenham
recebido instruções referentes à utilização
do aparelho ou estejam sob a supervisão de
uma pessoa responsável pela sua segurança.

16

Características da batedeira de cabeçota inclinável
R-29
Cabeçote
Alavanca de
travamento do
cabeçote
(não ilustrado)
Parafuso para fixação
dos acessórios
Tampa do bocal de
encaixe dos acessórios
Batedor
plano
Batedor de claras
Batedor tipo
″gancho″para
massas
Alavanca de
controle de
velocidade
Prato para fixação da tigela
Eixo do batedor
Tigela de aço
inoxidável com
capacidade
para 4,8 L
17
Português

PARA TRAVAR O CABEÇOTE EM POSIÇÃO
ELEVADA
•Empurre a alavanca de travamento para
a posição DESTRAVADA e segure.
•Incline o cabeçote para trás.
•Mova a alavanca de travamento para a
posição TRAVADA.
PARA TRAVAR O CABEÇOTE EM POSIÇÃO DE
FUNCIONAMENTO
•Empurre a alavanca de travamento para
a posição DESTRAVADA e segure.
•Abaixe o cabeçote até que esteja
completamente em posição de
funcionamento.
•Mova a alavanca de travamento para a
posição TRAVADA.
•Antes de iniciar o funcionamento, teste a
trava do cabeçote tentando levantá-lo.
NOTA: O cabeçote deve estar sempre na
posição TRAVADA quando a batedeira estiver
em funcionamento.
PARA OPERAR O CONTROLE DE VELOCIDADE
•No início de funcionamento, a alavanca de
controle de velocidade deve estar sempre
configurada na velocidade mais baixa, e
depois, gradualmente, aumentada até
atingir a velocidade desejada, a fim de
evitar que os ingredientes respinguem para
fora da tigela. Veja “Guia de controle de
velocidade”.
0 1 2 4 6 8 10
PARA ENCAIXAR A TIGELA
•Certifique-se de que o controle de velocidade
esteja na posição OFF (desligado).
•Incline o cabeçote para trás.
•Posicione a tigela no prato de fixação.
•Gire a tigela delicadamente no sentido
horário (veja imagem acima).
•Encaixe o protetor de respingos sobre a tigela.
* Se o protetor de respingos estiver incluído
PARA REMOVER A TIGELA
•Gire o controle de velocidade para a posição
OFF (desligado).
•Incline o cabeçote para trás.
•Gire a tigela no sentido anti-horário.
PARA ENCAIXAR O BATEDOR PLANO,
BATEDOR DE CLARAS, OU BATEDOR TIPO
″GANCHO″PARA MASSAS
•Gire o controle de velocidade para a posição
OFF (desligado) e desligue a unidade da
tomada.
•Levante o cabeçote.
•Deslize o acessório no eixo do batedor e
pressione para cima o mais alto possível.
•Gire o batedor para a direita, prendendo-o
sobre o pino no eixo.
PARA REMOVER O BATEDOR PLANO,
BATEDOR DE CLARAS, OU BATEDOR TIPO
″GANCHO″PARA MASSAS
•Gire o controle de velocidade para a posição
OFF (desligado) e desligue a unidade da
tomada.
•Levante o cabeçote.
•Pressione o batedor para cima o mais alto
possível e gire-o para a esquerda.
•Remova o acessório do eixo do batedor.
KitchenAid
St.Joseph,Michigan,USA
01246810
DESLIGADO LIGADO
18

Cabeçote
Manivela para
elevar/abaixar
a tigela
(não ilustrado)
Trinco de mola e pino
de encaixe da tigela
(não ilustrado)
Parafuso para
fixação dos
acessórios
Tampa do bocal de
encaixe dos acessórios
Pinos localizadores
Batedor de claras Batedor plano Batedor tipo
″gancho″
para massas
Alavanca de controle
de velocidade
Suporte da tigela
Eixo do
batedor
Tigela de aço
inoxidável com
capacidade para 4,8 L
Características do sistema ″bowl-lift″com levantamento da tigela
19
Português

PARA ELEVAR A TIGELA
•Gire a manivela para elevar/abaixar para cima
até que se encaixe e fique travada na posição
vertical.
•A tigela deve estar sempre erguida,na posição
travada,quando estiver em funcionamento.
PARA ABAIXAR A TIGELA
•Gire a manivela para elevar/abaixar para baixo.
PARA ENCAIXAR O BATEDOR PLANO,
BATEDOR DE CLARAS,OU BATEDOR TIPO
″GANCHO″PARA MASSAS
•Gire o controle de velocidade para a posição OFF
(desligado) e desligue a unidade da tomada.
•Abaixe a tigela girando a manivela para
elevar/abaixar para baixo.
•Deslize o batedor plano no eixo do batedor e
pressione para cima o mais alto possível.
•Gire o batedor para a direita,prendendo-o sobre
o pino no eixo.
PARA REMOVER O BATEDOR PLANO,
BATEDOR DE CLARAS,OU BATEDOR TIPO
″GANCHO″PARA MASSAS
•Gire o controle de velocidade para a posição OFF
(desligado) e desligue a unidade da tomada.
•Abaixe a tigela girando a manivela para
elevar/abaixar para baixo.
•Pressione o batedor para cima o mais alto
possível e gire-o para a esquerda.
•Remova o acessório do eixo do batedor.
PARA OPERAR O CONTROLE DE VELOCIDADE
•No início de funcionamento,a alavanca de
controle de velocidade deve estar sempre
configurada na velocidade mais baixa, e depois,
gradualmente,aumentada até atingir a
velocidade desejada, a fim de evitar que os
ingredientes respinguem para fora da tigela.
Veja“Guia de controle de velocidade”.
BOTÃO DE RESTABELECIMENTO CONTRA
SOBRECARGA (Modelo 5KPM50 somente)
•Se a batedeira está sobrecarregada,o botão de
restabelecimento contra sobrecarga saltará e a
batedeira desligará.Gire o controle de velocidade
para a posição OFF (desligado).Espere alguns
minutos, e em seguida,pressione o botão de
restabelecimento contra sobrecarga.Gire o
controle de velocidade para a velocidade
desejada e continue a operação.
PARA ENCAIXAR A TIGELA
•Certifique-se de que o controle de velocidade
esteja na posição OFF (desligado).
•Coloque a manivela para elevar/abaixar a tigela
na posição ″para baixo″.
•Encaixe os suportes da tigela sobre os pinos
localizadores.
•Pressione a parte traseira da tigela para baixo
até que os pinos da tigela se encaixem no trinco
de mola.
•Encaixe o protetor de respingos sobre a tigela.
•Levante a tigela antes de começar a misturar.
PARA ENCAIXAR O PROTETOR DE RESPINGOS*
1. Gire o controle de velocidade para a posição OFF
(desligado).
2. Desligue a batedeira Stand Mixer da tomada ou
desconecte da força.
3. Conecte o batedor plano, o batedor tipo
″gancho″,ou o batedor de claras e a tigela.
4. Através da parte frontal da batedeira, deslize o
protetor de respingos sobre a tigela até que fique
centralizado.A borda inferior do protetor deve se
encaixar dentro da tigela.
PARA REMOVER O PROTETOR DE RESPINGOS
1. Gire o controle de velocidade para a posição OFF
(desligado).
2. Desligue a batedeira Stand Mixer da tomada ou
desconecte da força.
3. Levante a parte frontal do protetor de respingos
livre da borda da tigela e puxe para frente.
4. Remova o acessório e a tigela.
PARA USAR O PROTETOR DE RESPINGOS
1. Para obter os melhores resultados,gire o
protetor para que o cabeçote cubra a sua
abertura em formato de“u”.Quando estiver
diante da batedeira,o protetor de respingos
estará à direita da tampa do bocal de encaixe
de acessórios.
2. Adicione ingredientes dentro da tigela através
do protetor de respingos.
* Se o protetor de respingos estiver incluído
NOTA: Certifique-se de que a tigela e o protetor
de respingos estejam corretamente posicionados.
PARA REMOVER A TIGELA
•Coloque a manivela para elevar/abaixar a tigela
na posição ″para baixo″.
•Segure a alça da tigela e levante-a para cima
e para fora dos pinos localizadores.
0 1 2 4 6 8 10
20