KLARITY Supine Breast System User manual

!
Klarity Medical Products, LLC
600 Industrial Parkway
Heath, OH 43056
T: 740.788.8107 F: 740-788-8109
[email protected]
www.klaritymedical.com
!
!
To be used by a qualified medical professional
IFU.BP.007.019/20/21
!
Store below
35˚C (95˚F)!
35˚C
!
Keep in a
cool and dry
environment!
Lotus NL B.V
Koningin Julianaplein 10, le Verd, 2595AA
The Hague, Netherlands
T: [phone] (English)
T: [phone] (Dutch)
EC
REP
Klarity Supine Breast System
INSTRUCTIONS FOR USE
GENERAL INFORMATION
The Klarity Supine Breast System is used for positioning and re-
positioning patients during breast radiation therapy treatment and other
treatment modalities.
PRODUCT DESCRIPTION
The Klarity Breast System is an adjustable baseplate with different
options for optimal treatment and positioning. The baseplate attaches to
a treatment table and can be raised or lowered with elevation supports.
Arm cups support the lower arms, and wrist cups or hand grips can be
used for the upper arms. Both are included for hand placement. The
patient’s bottom is supported by a bottom stopper and leg cushions
elevate the lower limbs.
PRODUCT SPECIFICATIONS
Board Weight (without accessories): 5.44 kg/12 lbs
Board Weight (with accessories): 6.80 kg/15 lbs
Dimensions: 131 cm Length
41 cm Width
4 cm Height
20 mm Thickness
Material: Carbon Fiber
Absorption Factor (AF%):
Co-60: 2.6
6MV: 2
8MV: 1.7
15MV: 1.5
STORAGE AND CLEANING
Store in a clean, dry place away from direct sunlight. Wipe thoroughly
with a neutral antiseptic cleaner. Allow to dry thoroughly before next use.
INSTRUCTIONS FOR USE
1. Attach the baseplate to the treatment table or CT Couch using an
indexing bar.
2. Next, achieve the desired elevation by selecting the 5˚, 10˚, 15˚,
20˚, or 25˚ support bar. Place the elevation bar into the slot on the
underside of the top place.
3. Lower the top plate and lock into place with the pushpin at the top
of the plate. Secure with the Velcro straps.
4. Place either the wrist cups or hand grips into the top holes
5. Position the head cup into the desired hole
6. Attach the arm cups into the baseplate by screwing the attachment
screws from the bottom. Please note that the “wings” of the arm
cups should be towards the outside of the board, away from the
patient. Adjust the arm cups to the desired angle and position.
7. Position the patient on the baseplate.
8. If needed, breast/torso and head-only S-type thermoplastic masks
can be used to secure the patient. Please see a full list of
compatible masks at www.klaritymedical.com/masks. If using a
mask, draw the mask down over the patient and secure it to the
baseplate using the pins on either side of the mask.
9. Once the mask cools, release the mask by pulling up the pins.
!

!
Klarity Medical Products, LLC
600 Industrial Parkway
Heath, OH 43056
T: 740.788.8107 F: 740-788-8109
[email protected]
www.klaritymedical.com
!
!
To be used by a qualified medical professional
IFU.BP.007.019/20/21
!
Store below
35˚C (95˚F)!
35˚C
!
Keep in a
cool and dry
environment!
Lotus NL B.V
Koningin Julianaplein 10, le Verd, 2595AA
The Hague, Netherlands
T: [phone] (English)
T: [phone] (Dutch)
EC
REP
!
Number!
Item!Name!
1
Baseplate
2
Arm Cups
3
Arm Cup Hole Options (4)
4
Head Cup
5
Hand Grips (or Wrist Cups)
6
Locking Pin for Elevation Bar
7
Elevation Bar
8
Fiducial Marker
9
Bum Stop
10
Leg Cushion
!
!