Klimawent UES-N User manual

1
10.01.2019 Universal Extraction Station UES-N
Use and Maintenance Manual
Universal Extraction Station
UES-N

2
Universal Extraction Station UES-N 10.01.2019
Contents:
1. Introductory Remarks......................................................................... 3
2. Application ......................................................................................... 3
3. Reservations of Producer .................................................................... 3
4. Technical Data.................................................................................... 4
5. Structure and Function....................................................................... 4
6. Assembly and Start-up ........................................................................ 5
7. Operational Use .................................................................................. 6
8. Troubleshooting Guide........................................................................ 6
9. Maintenance ....................................................................................... 6
10. Occupational Health and Safety .......................................................... 6
11. Transport and Storage ........................................................................ 6
12. Terms of warranty .............................................................................. 6
13. Sample of the Declaration of Conformity ............................................ 7

3
10.01.2019 Universal Extraction Station UES-N
1. Introductory Remarks
The purpose of the present User’s Manual is to supply User with directions within the range of
application, installation, start-up and the operational use of the UES-N Universal Extraction
Station.
Installing, start up and operational use are exclusively admissible after getting acquain-
ted with the contents of the Use and Maintenance Manual.
With regard to continuity of work carried on improvement of our products, we reserve for our-
selves the revision possibility of the draft and technological changes improving their functional
features and safety.
The construction of the UES-N Universal Extraction Station meets the requirements of the cur-
rent state of technology as well as the safety and health assurances included in:

2006/42/EC Machinery Directive of the European Parliament and of the Council of 17 May,
2006 on machinery –amending the 95/16/EC (recast) /Journal of Laws EC L157 of 09.06.2006, page 24/

2014/35/EC Directive of the European Parliament and of the Council of 26 February, 2014
on the harmonisation of the laws of the Member States relating to the making available on the
market of electrical equipment designed for use within certain voltage limits.
/Journal of Laws EC L96 of 29.03.2014/
The device has been constructed and produced on the basis of following harmonized standards:

EN ISO-12100:2012
–
“Safety of machinery –Basic concepts, general principles
for design. Risk assessment and risk reduction”.

EN 60204-1:2010
–
“Safety of machinery –Electrical equipment of machines.
Part 1: General requirements”.
2. Application
UES-N Universal Extraction Station is applied for capturing and removal of dust and gas,
arising during grinding with a portable grinding device or during the welding-jewelry activity.
The appliance can work with an extraction fan or with a filtering unit.
3. Reservations of Producer
A.
Manufacturer accepts no liability for any consequences following from the operational use
that is in contradiction to the purpose of application.
B.
Installing of any additional elements not belonging to the normal device structure (or acces-
sory set) is not acceptable.
C.
Any structural changes or modification of the appliance, carried out by User on one’s own are
not permitted.
D.
Protect the housing from mechanical damage.

4
Universal Extraction Station UES-N 10.01.2019
4. Technical Data
Table No.1
Type
Dimensions of
the worktable
Dimensions of the
holes in the grate
Weight
Recommended
volume flow
Flow
resistances
[mm]
[mm]
[kg]
[m³/h]
[Pa]
UES-N
1400 x 707
30 x 44
150
2400
250
5. Structure and Function
The station consists of subsequent elements:
–
worktable with a grate made of platform grill,
–
half-open housing,
–
suction chamber with a waste drawer,
–
adjustment shut-off damper,
–
lighting installation –to illuminate the work field,
–
connection fitting piece for the extraction ducting,
–
swing door from both sides.
The connection fitting piece can be mounted to the upper housing surface, to the side walls
or to the side surface of the suction chamber. The air can be extracted downwards through the
grate (of the suction chamber) or upwards through the openings in the housing ceiling.
The air division proportion (up-flow extraction / down-flow extraction) is controlled by a shut-off
damper that is placed in the suction chamber housing.
The Universal Extraction Station is equipped with a swinging side door, being closed by a mag-
net. Therefore, the side walls can be swung aside, when on the worktable are placed larger ele-
ments, protruding the outline of the worktable.
Fig. No.1 –Structure and dimensions of the Universal Extraction Station UES-N

5
10.01.2019 Universal Extraction Station UES-N
Fig. No.2 –
Structure and dimensions of the Universal Extraction Station UES-N –top view
6. Assembly and Start-up
The appliance ought to be placed stably on the even floor surface and should be connected to the
discharge ducting. Fix the supply cable (power lead) to the terminal box energizing the lighting of the
worktable (see Connection Diagram in Fig. No.3).
Caution:
1. Insulation class I
2. Ingress protection IP55
3. On the device place a sticker IEC 60417-5036
4. The motor switch does not disconnect the lighting upon voltage fade and the
supply re-gain.
5. The elements of the device ought to be connected with a protective cable.
Fig. No.3 –Connection Diagram of the appliance type UES-N

6
Universal Extraction Station UES-N 10.01.2019
7. Operational Use
The device does not require any special maintenance. Simply, clean the workplace and empty
the waste drawer. Device malfunctions and corrective action in such cases are included in Sec-
tion 8, Table No.2.
8. Troubleshooting Guide
Table No.2
Problem
Possible reason
Corrective action
1.
The intake air volume is de-
The waste drawer is over-filled
Empty the waste drawer
creasing
2.
The intake air volume is de-
An obstacle object, reducing the
Unclog the extraction in-
creasing along with the noise
air flow got stuck within the in-
stallation
rise
stallation
remove the barrier object
3.
Larger amounts of pollutants
The waste drawer is not closed
Close the waste drawer
are emerging outside
tightly
correctly
9. Maintenance
In the course of operational use, check if the waste drawer is filled up. The construction of the
Universal Extraction Station gives possibility of use without routine technical supervision.
10. Occupational Health and Safety
Start up and the operational use of the Universal Extraction Station are admissible after getting
acquainted with the contents of the present Use and Maintenance Manual.
Any activities concerning the connection to the power supply system
ought to be executed exclusibely by an authorized person with valid electrical qualifi-
cations.
Manufacturer is not responsible for any effects of operational use that is in contradiction with
the purpose of application of the appliance.
11. Transport and Storage
The appliance ought to be stored in a dry room and in conditions of appropriate ventilation. Du-
ring the transport it should be in vertical (upright) position and protected from being damaged,
scratched, indented, overturned and unwillingly displaced.
12. Terms of warranty
The period of warranty for the purchased device is indicated in the “Card of Warranty”.
The warranty does not comprise:
●
device failures caused during use which was in contradiction with the purpose of operatio-
nal use and with the present Use and Maintenance Manual,
●
mechanical / electrical damages and malfunctions caused by User,
●
modifications and changes on the appliance undertaken by User on one’s own,
●
inefficiency or malfunctions following from the normal operational exhaustion / wear.
Infringement of the section 3 “Reservations of Producer” of the Use and Maintenance
Manual and especially modifications undertaken by User on one’s own shall cause the
loss of warranty validity.

7
10.01.2019 Universal Extraction Station UES-N
13. Sample of the Declaration of Conformity
Declaration of Conformity EC No. ……………..
Manufacturer (eventually the authorized representative / importer):
name: KLIMAWENT S.A.
address: 81-571 Gdynia, ul. Chwaszczyńska 194
A person, authorized for issuing the technical documentation: Teodor Świrbutowicz, KLIMAWENT S.A.
hereby declares that the appliance:
name: Universal Extraction Station
type/model: UES-N
serial number: …………………………….. year of production: ………………………..
meets the requirements of the subsequent European Directives:

2006/42/EC Machinery Directive of the European Parliament and of the Council of 17 May,
2006 on machinery –amending the 95/16/EC (recast) /Journal of Laws EC L157 of 09.06.2006, page 24/

2014/35/EC Directive of the European Parliament and of the Council of 26 February, 2014
on the harmonisation of the laws of the Member States relating to the making available on the
market of electrical equipment designed for use within certain voltage limits.
/Journal of Laws EC L96 of 29.03.2014/
The device has been constructed and produced on the basis of following harmonized standards:

EN ISO-12100:2012
–
“Safety of machinery –Basic concepts, general principles
for design. Risk assessment and risk reduction”.

EN 60204-1:2010
–
“Safety of machinery –Electrical equipment of machines.
Part 1: General requirements”.
……………………………
……………………………
……………………………
place, date
signature of authorised person
name, surname, function
of the signatory
KLIMAWENT S.A.
District Court Gdańsk-Północ
NIP: 958 159 21 35
Supported Employment Enterprise
in Gdańsk, VII Wydział Gospodarczy
REGON: 220631262
81-571 Gdynia, ul. Chwaszczyńska 194
of the National Register of Court
Bank Account: Santander Bank Polska S.A.
phone: [phone]
KRS 0000308902 company stock
56 1500 1025 1210 2007 8845 0000
email: [e-mail]
13.779.200 zł paid in total
www.klimawent.com.pl

8
Universal Extraction Station UES-N 10.01.2019
Producer:
KLIMAWENT S.A.
81-571 Gdynia, ul. Chwaszczyńska 194
tel. [phone]
fax [phone]
e-mail: [e-mail]
www.klimawent.com.pl
1230
UES-N
10.01.2019/EN