KMART 12 User manual

KMART
INSTRUCTION MANUAL
BICYCLE ASSEMBLY & MAINTENANCE
CHILDREN BICYCLE
12” (30CM), 14” (35CM), 16” (40CM)
18” (45CM), 20” (50CM)

Contents
1. Parts identification
2. Safety Precaution
5. Adjustment
7. Warranty
1
2
3. Check List 6
4. Assembly
6. Repair and Service
7
28
21
15

/
/

SAFETY PRECAUTIONS
and if not used correctly you may lose control and fall.
If there is front brake,apply the rear brake first, and then apply the front brake. The front brake is strong
3

5
Phillips head screwdriver;
adjustable wrench or an 8mm, 10mm, 13mm,14mm
15mm open and box end wrenches;Allen Keys;
A plier with cable cutting abilityAir pump；
Keep a Record of Your Bicycle
Each bicyle has a Serial Number stamped into the frame. Write down this number to keep it for future reference.
Take a colour photograph of your bicycle, write the Serial number on the back of the photograph and keep it in a safe place.
If you keep a record of the details of your bicycle it will greatly increase the possibility of getting it back should it be lost or stolen.
Remember the advice about LOCKING YOUR BICYCLE. A good quality lock is cheap insurance.
Tools required (Not included in the package)
6” (15cm)
It is recommended that a torque wrench is used when
assembling the bike.

Tighten them so they do not move and are horizontal. Check the handlebar is in good condition and the ends of the
handlebar are plugged. Check the bell is fitted and working well.
Warning: Handlebar grips and tube end plugs should be replaced if damaged, as bare ends have been know to cause injury.
Please check the condition of grips and bar ends before riding.

8