KMC Controls STE-9000 Series User manual

Quick Reference Guide
STE-9000 Series Digital Room Sensors
PM
Up
Current Temperature
Opt. Motion Sensor
Control Buttons
Occupancy Mode
Time (and Optional
CO2 or Humidity)
Down
Enter
CONTROL BUTTONS
Press the Enter button repeatedly to view:
• Cooling Setpoint
• Heating Setpoint
• Mode (Heat, Cool, Auto, Off, or Emergency
Heat)
• Fan (Auto or Constant On)
While viewing a menu item:
• Press the Up or Down button to change the
setting if desired
• Press the Enter button to continue
(A Level 1 password might be required to
access this menu. If needed, contact the
installer.)
OCCUPANCY MODE
The icon shows the current mode (according
to the schedule, sensed motion, or button
activation):
• Person in house = Occupied
• Empty house = Standby
• OVR = Override (activated by motion or ad-
justing setpoint during unoccupied times on
a schedule)
• None of the icons = Unoccupied

2© 2017 KMC Controls, Inc. Specifications and design are subject to change without notice AG170426A
SUPPORT
Additional resources for installation,
conguration, application, operation,
programming, upgrading, and much more are
available on the web at www.kmccontrols.
com. To see all available les, log-in to the KMC
Partners site.
CONFIGURATION
For information about the conguration menus,
see the KMC Conquest Controller Application
Guide.

DESCRIPTION
KMC Conquest™ STE-9000 series NetSensors
are wall-mounted digital space temperature
sensors designed for use with KMC Conquest
BAC-5900/9000/9300 series controllers.
OPTIONS
Not all options, such as motion detection or
emergency heat, may be available with the
particular equipment model and application.