Knape&Vogt MUV HD Series User manual

SPECIFICATIONS
Number: Full Extension Soft-Close Undermount Drawer Slide
Mounting: Side, for Frame or Frameless Construction
Height: 1-7/8"
Load Rating: 120-Pound Class
Finish: Zinc
Travel: Full Extension
Sizes: 18", 20", 21", 22", 24", 27", 30"
Packaged: Bulk (B): 4 Pairs per Carton
Release Lever: MUV1D-RL: Up/Down Height Adjustment. 60 pairs per carton
MUV2D-RL: Up/Down Height, Side-to-Side Adjustment. 24 pairs per carton
MUV3D-RL: Up/Down Height, Side-to-Side, In/Out Adjustment. 12 pairs per carton
MUVRL INSET: Inset Adjuster (MUV2D-RL Add On). 12 pairs per carton
Fasteners: MUV-122: #7 x 5/8"Flat Head Screw – Slide
MUV-123: #6 x 1/2"Truss Head Screw – Front Release Levers and Rear Bracket
Install Jig: MUV-124
Material Thickness
For use with the following
material thicknesses:
5/8" [16mm]
9/16" [14mm]
1/2" [13mm]
Full Extension Soft-Close
Undermount Drawer Slide
DRAWER HARDWARE INSTALLATION
15/16"
[24mm] 1-1/4"
[32mm]
1/4" [6.3mm]
Variable
Drawer Bottom
Drawer Bottom
Pre-drill front holes
at 15º angle.
Release Lever Adjustment (1/8")
(Vertical Adjustment)
DRAWER ASSEMBLY
Maximum Drawer Width: 42"
Maximum Load Rating: 120 lb.
Maximum Drawer Material Thickness: 5/8"
Note: Frame Applications must be blocked out.
Maximum Operating Conditions
1
Reference Page 6 for two critical drawer dimensions:
• Max. Drawer Bottom Recess
• Inside Drawer Width

RELEASE LEVERS
Full Extension Soft-Close Undermount Drawer Slide
Slide Cabinet
Depth
Min.
Interior
Depth
Slide
Length
Drawer
Length
Travel
Length A B C
MUVHDAB 30 30-3/4"
[781mm]
30"
[762mm]
30-7/16"
[773mm]
30"
[762mm]
29.254"
[743.05mm]
15/32"
[12mm]
3/4"
[19mm]
12-1/2"
[317mm]
MUVHDAB 27 27-3/4"
[705mm]
27"
[610mm]
27-7/16"
[697mm]
27"
[610mm]
26.678"
[667.46mm]
15/32"
[12mm]
3/4"
[19mm]
12-1/2"
[317mm]
MUVHDAB 24 24-3/4"
[629mm]
24"
[610mm]
24-7/16"
[621mm]
24"
[610mm]
23.278"
[591.26mm]
15/32"
[12mm]
3/4"
[19mm]
12-1/2"
[317mm]
MUVHDAB 22 22-3/4"
[578mm]
22"
[533mm]
22-7/16"
[570mm]
22"
[533mm]
21.277"
[540.44mm]
15/32"
[12mm]
3/4"
[19mm]
12-1/2"
[317mm]
MUVHDAB 21 21-3/4"
[553mm]
21"
[533mm]
21-7/16"
[545mm]
21"
[533mm]
20.279"
[515.10mm]
15/32"
[12mm]
3/4"
[19mm]
12-1/2"
[317mm]
MUVHDAB 20 20-3/4"
[527mm]
20"
[457mm]
20-7/16"
[520mm]
20"
[457mm]
19.273"
[489.53mm]
15/32"
[12mm]
3/4"
[19mm]
12-1/2"
[317mm]
MUVHDAB 18 18-3/4"
[479mm]
18"
[457mm]
18-7/16"
[469mm]
18"
[457mm]
17.277"
[438.53mm]
15/32"
[12mm]
3/4"
[19mm]
12-1/2"
[317mm]
3/4" [19mm]
11/32"
[9mm]
11/32"
[9mm]
2-33/64"
[64mm]
15/32"
[12mm]
BOTTOM HOLE PATTERN
A
B
C
Part
Number Height Side-to-Side In/Out
MUV1D-RL + 1/8" [3mm] – –
MUV2D-RL + 1/8" [3mm] ± 1/16" [1.5mm] –
MUV3D-RL + 1/8" [3mm] ± 1/16" [1.5mm] + 3/32" [2.5mm]
MUV1D-RL
HEIGHT ADJUSTMENT
Height
MUV2D-RL
HEIGHT & SIDE-TO-SIDE ADJUSTMENT
Height
Side-to-side
MUV3D-RL
HEIGHT & SIDE-TO-SIDE & IN/OUT ADJUSTMENT
Height
Side-to-side
In/Out
IN/OUT ADJUSTMENT
MUVRL INSET (add onto MUV2D-RL)
2

FRAMELESS APPLICATIONS [WITH DECORATIVE FRONT]
Full Extension Soft-Close Undermount Drawer Slide
CabinetDepth
Interior Depth
Slide LengthSetback 1/8" [3mm]
Mount Position
1-7/16" [37mm]
1-7/16"
[37mm]
31/32"
[25mm]
Min. Top Gap
1/4" [6mm]
Max.Drawer Height=
Opening minus 13/16"
[20mm]
Bottom
Recess
1/2" [12.7mm]
Bottom Clearance
9/16" [14mm]
Drawer Gap
1/32" [1mm]
A B
C[seechart at bottom of page][see chart at bottom of page]
[see chart
at bottom
of page]
Drawer Length
1-1/4"
[32mm]
1-11/32"
[34mm]
9/32"
[7mm]
1-7/16"
[37mm]
31/32"
[25mm]
11/32" [9mm]
TYP.
SLIDE FRONT DETAIL
REAR SLIDE DETAIL
11/32"
[9mm]
TYP
1-15/32"
[37.5mm]
1-7/16"
[37mm] TYP. 31/32"
[25mm] TYP. 11/32"
[9mm]
Slide Cabinet
Depth
Min.
Interior
Depth
Slide
Length
Drawer
Length
Travel
Length A B C
Max.
Material
Thickness
Setback
MUVHDAB 30 30-3/4"
[781mm]
30"
[762mm]
30-7/16"
[773mm]
30"
[762mm]
29.254"
[743.05mm]
5-3/64"
[128mm]
8-13/16"
[224mm]
1-1/16"
[27mm]
5/8"
[16mm]
1/8"
[3mm]
MUVHDAB 27 27-3/4"
[705mm]
27"
[610mm]
27-7/16"
[697mm]
27"
[610mm]
26.678"
[667.46mm]
5-3/64"
[128mm]
8-13/16"
[224mm]
1-1/16"
[27mm]
5/8"
[16mm]
1/8"
[3mm]
MUVHDAB 24 24-3/4"
[629mm]
24"
[610mm]
24-7/16"
[621mm]
24"
[610mm]
23.278"
[591.26mm]
5-3/64"
[128mm]
8-13/16"
[224mm]
1-1/16"
[27mm]
5/8"
[16mm]
1/8"
[3mm]
MUVHDAB 22 22-3/4"
[578mm]
22"
[533mm]
22-7/16"
[570mm]
22"
[533mm]
21.277"
[540.44mm]
10-5/64"
[256mm]
8-13/16"
[224mm]
1-1/16"
[27mm]
5/8"
[16mm]
1/8"
[3mm]
MUVHDAB 21 21-3/4"
[553mm]
21"
[533mm]
21-7/16"
[545mm]
21"
[533mm]
20.279"
[515.10mm]
10-5/64"
[256mm]
8-13/16"
[224mm]
1-1/16"
[27mm]
5/8"
[16mm]
1/8"
[3mm]
MUVHDAB 20 20-3/4"
[527mm]
20"
[457mm]
20-7/16"
[520mm]
20"
[457mm]
19.273"
[489.53mm]
7-9/16"
[192mm]
8-13/16"
[224mm]
1-1/16"
[27mm]
5/8"
[16mm]
1/8"
[3mm]
MUVHDAB 18 18-3/4"
[479mm]
18"
[457mm]
18-7/16"
[469mm]
18"
[457mm]
17.277"
[438.53mm]
7-9/16"
[192mm]
8-13/16"
[224mm]
1-1/16"
[27mm]
5/8"
[16mm]
1/8"
[3mm]
3

Full Extension Soft-Close Undermount Drawer Slide
SLIDE FRONT DETAIL
1-1/4"
[32mm]
1-11/32"
[34mm]
9/32"
[7mm]
1-7/16"
[37mm]
31/32"
[25mm]
11/32" [9mm]
TYP.
REAR SLIDE DETAIL
11/32"
[9mm]
TYP
1-15/32"
[37.5mm]
1-7/16"
[37mm] TYP. 31/32"
[25mm] TYP. 11/32"
[9mm]
FACE-FRAME APPLICATIONS [WITH DECORATIVE FRONT]
CabinetDepth
InteriorDepth
Slide LengthSetback 1/8" [3mm]
Mount Position
3/8" [10mm]
1-7/16"
[37mm]
31/32"
[25mm]
Min. Top Gap
1/4" [6mm]
Max. Drawer Height=
Opening minus 13/16"
[20mm]
Bottom
Recess
1/2" max.
[12.7mm]
Bottom Clearance
9/16" [14mm]
Drawer Gap
1/32" [1mm]
Drawer Length
A B
C[seechart at bottom of page][see chart at bottom of page]
[see chart
at bottom
of page]
NOTE: FRAME APPLICATIONS MUST BE BLOCKED OUT
Slide Cabinet
Depth
Min.
Interior
Depth
Slide
Length
Drawer
Length
Travel
Length A B C
Max.
Material
Thickness
Setback
MUVHDAB 30 30-3/4"
[781mm]
30"
[762mm]
30-7/16"
[773mm]
30"
[762mm]
29.254"
[743.05mm]
5-3/64"
[128mm]
8-13/16"
[224mm]
1-1/16"
[27mm]
5/8"
[16mm]
1/8"
[3mm]
MUVHDAB 27 27-3/4"
[705mm]
27"
[610mm]
27-7/16"
[697mm]
27"
[610mm]
26.678"
[667.46mm]
5-3/64"
[128mm]
8-13/16"
[224mm]
1-1/16"
[27mm]
5/8"
[16mm]
1/8"
[3mm]
MUVHDAB 24 24-3/4"
[629mm]
24"
[610mm]
24-7/16"
[621mm]
24"
[610mm]
23.278"
[591.26mm]
5-3/64"
[128mm]
8-13/16"
[224mm]
1-1/16"
[27mm]
5/8"
[16mm]
1/8"
[3mm]
MUVHDAB 22 22-3/4"
[578mm]
22"
[533mm]
22-7/16"
[570mm]
22"
[533mm]
21.277"
[540.44mm]
10-5/64"
[256mm]
8-13/16"
[224mm]
1-1/16"
[27mm]
5/8"
[16mm]
1/8"
[3mm]
MUVHDAB 21 21-3/4"
[553mm]
21"
[533mm]
21-7/16"
[545mm]
21"
[533mm]
20.279"
[515.10mm]
10-5/64"
[256mm]
8-13/16"
[224mm]
1-1/16"
[27mm]
5/8"
[16mm]
1/8"
[3mm]
MUVHDAB 20 20-3/4"
[527mm]
20"
[457mm]
20-7/16"
[520mm]
20"
[457mm]
19.273"
[489.53mm]
7-9/16"
[192mm]
8-13/16"
[224mm]
1-1/16"
[27mm]
5/8"
[16mm]
1/8"
[3mm]
MUVHDAB 18 18-3/4"
[479mm]
18"
[457mm]
18-7/16"
[469mm]
18"
[457mm]
17.277"
[438.53mm]
7-9/16"
[192mm]
8-13/16"
[224mm]
1-1/16"
[27mm]
5/8"
[16mm]
1/8"
[3mm]
4

Full Extension Soft-Close Undermount Drawer Slide
INSET APPLICATION
RUNNER SETBACK INSET APPLICATIONS
Drawer Sub-Front
Thickness Slide Setback
1/2" [13mm] 11/16" [17.5mm] 13/16" [21mm] 15/16" [24mm]
5/8" [16mm] 13/16" [21mm] 15/16" [24mm] 1-1/16" [27mm]
3/4" [19mm] 15/16" [24mm] 1-1/16" [27mm] 1-3/16" [30mm]
5/8" [16mm] 3/4" [19mm] 7/8" [22mm]
Drawer Front Thickness
1D & 2D Release Lever
KV Part #: MUV1D-RL & MUV2D-RL
Charted setbacks set the face of the drawer front flush with face of cabinet
Calculation: Drawer Sub-Front Thickness + Drawer Front Thickness - 7/16" [11mm]
Drawer Sub-Front
Thickness Slide Setback
1/2" [13mm] 23/32" [18.5mm] 27/32" [22mm] 31/32" [25mm]
5/8" [16mm] 27/32" [22mm] 31/32" [25mm] 1-3/32" [28mm]
3/4" [19mm] 31/32" [25mm] 1-3/32" [28mm] 1-7/32" [31mm]
5/8" [16mm] 3/4" [19mm] 7/8" [22mm]
Drawer Front Thickness
3D Release Lever
KV Part #: MUV3D-RL
Charted setbacks set the face of the drawer front flush with face of cabinet
Calculation: Drawer Sub-Front Thickness + Drawer Front Thickness - 13/32" [10mm]
FACE-FRAME
Min. Interior Depth
Min. = Slide Length + Setback + 1/4" [6mm] NOTE: FRAME APPLICATIONS MUST BE BLOCKED OUT
Variable Setback
FRAMELESS
Min. Interior Depth
Min. = Slide Length + Setback + 1/4" [6mm]
5

DRAWER DIMENSIONS FOR FACE-FRAME AND FRAMELESS APPLICATIONS
Full Extension Soft-Close Undermount Drawer Slide
Cabinet Opening Width
Drawer Thickness Deduct from Opening Width
5/8" [16mm] 3/8" [10mm]
9/16" [14mm] 9/16" [14mm]
1/2" [13mm] 5/8" [16mm]
If material is less than 1/2",
use formula.*
Drawer Width Calculation
CRITICAL*
Inside Drawer Width
CRITICAL
Max. Drawer Bottom Recess: 12.7mm (1/2")
Min. Top Opening Clearance:
6.3mm (1/4")
Min.
Bottom
Opening
Clearance:
14mm
(9/16")
*Cabinet Opening Width Minus 42mm (1-5/8") = Inside Drawer Width
MuV+ HD Maximum Drawer Side Material Thickness: 16mm (5/8")
Use Muv+34 HD for Drawer Material from 16mm (5/8") to 19mm (3/4")
1/4" x 3/8" DEEP [6mm x 10mm DEEP]
9/32"
[7mm]
1/2" Max.
[12.7mm]
1-3/8" Min.
[35mm]
7/16"
[11mm]
DRAWER NOTCH & BORE
This warranty is given to the initial purchaser of new commercial products purchased from Knape & Vogt and its subsidiaries. The warranty covers defects in materials and
workmanship. The warranty does not apply to defects resulting from misuse, damage or abuse, normal wear and tear, accident, modification, improper installation or maintenance,
third party materials or damage during shipping. The warranty is not transferable and does not cover any subsequent purchasers of the products. During the Limited Lifetime
Warranty period, Knape & Vogt, will, at its option, repair or replace any defective product with a comparable product or component. This Limited Warranty is for repair or replacement
of defective products only and does not cover any other costs such as removal, installation, or other related expenses. For warranty service, please contact Knape & Vogt, 2700
Oak Industrial Drive, Grand Rapids, MI 49505, Attention: Customer Service. Information regarding the claimed defect and date of purchase of the product must be provided. Any
defective product must be returned postage or freight prepaid to Knape & Vogt. THIS LIMITED WARRANTY CONSTITUTES THE ONLY WARRANTY FOR THE PRODUCTS AND ALL
OTHER WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, BY OPERATION OF LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY DISCLAIMED. THIS LIMITED WARRANTY CONSTITUTES THE SOLE REMEDY AVAILABLE WITH
REGARD TO ANY DEFECTIVE PRODUCTS. KNAPE & VOGT SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, CONSEQUENTIAL OR SPECIAL DAMAGES, INCLUDING WITHOUT
LIMITATION, LOSS OF TIME, INCONVENIENCE, OR LOST REVENUES OR PROFITS.
KNAPE & VOGT LIMITED LIFETIME WARRANTY FOR COMMERCIAL PRODUCTS
Copyright © 2020 Knape & Vogt, all rights reserved. Standard KV Commercial Warranty | Manufacturer reserves the right to change specifications without notice and without incurring responsibility for existing units. US Patent 8,430,567
2700 Oak Industrial Drive NE Grand Rapids, MI 49505
800.253.1561 • 616.459.3311 • fax [phone] www.kv.com
310482_REV-0120A_0120