Kodak 210433-1 User manual

User's Guide
for
ENCAD 1500 TX
Digital Textile System
TM
P/N 210433-1
Copyright ENCAD, Inc. 1998
ENCAD®, Quality Imaging Supplies and Digital Textile System are trademarks of ENCAD, Inc.
Macintosh is a trademark of Apple Computer Corp.
Other trademarks are the property of their respective owners.
Except as provided below, no part of this manual may be copied or distributed, transmitted,
transcribed, stored in a retrieval system, or translated in any human or computing language, in
any form or by any means, electronic, mechanical, magnetic or otherwise, or disclosed to a
third party without the express written permission of ENCAD, Inc., 6059 Cornerstone Court
West, San Diego, CA 92121, U.S.A.
Certain manuals are distributed by ENCAD in an electronic format on CD-ROM or over the
internet. The registered user of an ENCAD product whose manuals is distributed in this
fashion may print one copy for their personal use only.
REVISION HISTORY
Rev. A February 1998

1500TXUser'sGuide
ii
WARRANTY CLAIMS
United States
ENCAD®, Inc., warrants the 1500 TX printer (“PRODUCT”) to be free from defects in workmanship
and materials for a period of 180 days from the date of purchase. In order to submit a Warranty
claim,pleasecontacttheENCAD Help Deskat [phone].
ENCAD reserves the right to make changes or improvements to Products, without incurring any
obligation to similarly alter Products previously purchased.
Buyer’s sole and exclusive rights pursuant to this Warranty shall be for the repair or replacement of
defective Product. ENCAD specifically disclaims any and all other warranties, expressed or
implied, including but not limited to, implied warranties of merchantability and fitness for a
particular purpose. In no event shall ENCAD be liable for any loss of profit or other commercial
damages, special, incidental or consequential damages, or any other damages or claims, whatso-
ever.
This Warranty gives Buyer specific legal rights, and Buyer may also have other rights that vary
from state to state.
This Warranty applies only to printers purchased from ENCAD, or authorized ENCAD distributors
or dealers. The intent of this Warranty is to repair or replace defective Products subjected to
normal wear and tear, when operated according to ENCAD instructions.
This warranty does not cover damage to the Product resulting from the following:
· Accident or negligence.
· Unauthorized modification of the Product.
· Adverse environmental conditions.
· Service of the Product by other than an ENCAD authorized service provider.
· Unauthorized or improper use, including but not limited to:
- Use in applications for which the Product was not designed.
- Using cartridges, ink, or media other than ENCAD TX products.
- Lubricating any part of the printer.
Internationally: Contact your dealer or distributor for warranty information.

iii
1500TX User'sGuide
FCCStatement(U.S.A.)
TheUnitedStatesFederal Communications Commission has specified thatthefollowing notice be brought to the
attention of users of the ENCAD printers.
FEDERAL COMMUNICATIONS COMMISSION RADIO AND TELEVISION INTERFERENCE FOR
CLASS B DEVICE
Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
User Instructions:
If the equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment on and off, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by ENCAD, Inc. could void the user’s authority to operate
the equipment.
Note: This product was FCC certified under test conditions that included the use of shielded I/O cables and
connectors between system components. To be in compliance with FCC regulations, the user must use
shielded cables and connectors and install them properly.
VDE Statement
Hiermit wird bescheinigt, daß der Drucker in Übereinstimmung mit den Bestimmungen der BMPT-
AmstbIVfg 234/1991 funkentstört ist. Der vorschriftsmäßige Betrieb mancher Geräte (z.B. Meßsender) kann
allerdings gewissen Einschränkungen unterliegen. Beachten Sie deshalb die Hinweise in der
Bedienungsanleitung.
Dem Zentralamt für Zulassungen im Fernmeldewesen würde den Inverkehrbringen dieses Gerätes angezeigt
und die Berechtigung zur Überprüfung der Serie auf die Einhaltung der Bestimmungen eingeräumt.
IndustryCanada
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet apparell numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilleur
du Canada.

1500TXUser'sGuide
iv
Material safety data sheet
To obtain information on the proper use, handling, and disposal of any
ENCAD TX ink, consult the material safety data sheet included in the ink
kit or obtain a copy from ENCAD, Inc. at:
6059 Cornerstone Court West
San Diego, California 92121-3734
[phone]
International users should contact their local dealer or distributors.
GeneralOperatingSafety
The use of a <HAR> cord set (rated 10A, 250VAC) with the proper plug
configuration for the country where the device will be used is required for
continued safety compliance.
Ein harmonisiertes (<HAR>) Netzkabel (min. 10A, 250V~) mit dem
vorgeschriebenen Netzstecker für das entsprechende Land in dem das
Gerät installiert wird, ist unbedingt notwendig für die elektrische
Sicherheit.
El uso de cable poder <marcado HAR> (capacidad de 10A, 250V~), con
el enchufe apropiado para el país donde se use el producto, es requerido
para acatamiento de seguridad eléctrica.
L' emploi d' un cordon surmoulé <HAR> (estimé 10A, 250V CA) avec
la configuration de la fiche convenable pour le pays où l' appareil sera
utilisé, est exigé pour la conformité à la sécurité continuée.
Other reference materials
In addition to this User Guide, the following additional guides are
included with your printer:
Quick Start - Tells you how to assemble and install the printer's hard-
ware.
Software Drivers - Readme files on the 1500 TX CD-ROMcontain
information for installing and using the various drivers and utilities.

v
1500TX User's Guide
Manual conventions
➪Indicates a procedure for you to follow in order to perform a specific
function. Read the accompanying explanatory text before following the
step-by-step procedure.
!Indicates a warning. Ignoring the warning can damage the printer or
result in an unsatisfactorily printed image.
✓Indicates a tip or suggestion that can make using the printer easier or
improve your printed images.
Manual organization
It is not necessary to read this manual from cover to cover. Reading
Chapters 1 through 3 will give you an understanding of printer's basic
operation. Your particular needs will determine how you use the rest of
the guide.
Chapter 1 Introduction - Introduces the printer and provides basic
guidelines for getting the best print quality.
Chapter 2 Getting started - Describes the printer's components and
explains the basic steps needed for using the printer after it has been
assembled and connected to your computer. Includes procedures for
installing and priming ink cartridges and loading media.
Chapter 3 Setting printer options - Explains how to use some of the
printer's features.
Chapter 4 Maintenance - Includes instructions for periodic mainte-
nance functions such as refilling ink reservoirs, replacing ink cartridges,
and periodic cleaning of the ink cartridges and service station.
Appendix A Calibration - Explains what to look for in the calibration
plots and how to make the adjustments.
Appendix B Installing additional memory - Explains how to install
additional memory for printing large files.
Appendix C Menu tree - Explains the menu structure.

1500TXUser'sGuide
vi
Appendix D Error messages - Explains the error messages and pro-
vides suggestions of what to do when you see them.
Appendix E Glossary - Explains terms used in the manual.
AppendixF Technical information - Lists the technical specifications for
1500 TX printer.
Appendix G Supplies - Includes a complete list of ENCAD media, ink,
cartridges, and spare parts and information for ordering supplies for your
printer.
Appendix H Communication and cabling - Provides the printer's serial
cable requirements and details on setting serial communication param-
eters.
Appendix I Troubleshooting - Provides answers to commonly asked
questions and solutions to typical problems.

vii
1500TX User's Guide
Contents
Chapter 1 Introduction ......................................................1-1
Printing with 1500 TX printers ...............................................................1-2
Obtainingqualityresults ........................................................................1-2
Chapter 2 Getting started............................................. 2-1
Usingthe control panel..........................................................................2-2
Settingthelanguage..............................................................................2-3
Loadingmedia ......................................................................................2-3
Using the power media feed and take-up system ..................................2-4
Usingthe take-up roll ............................................................................2-5
Movingthe carriage ..............................................................................2-6
Installingthecutter ................................................................................2-7
Filling the ink reservoirs ........................................................................2-8
Filling the ink cartridges ........................................................................2-9
Priming the ink delivery lines...............................................................2-12
Priming the ink cartridges ...................................................................2-14
Aligning the ink cartridges (color calibration) ......................................2-17
Cartridge recognition ..........................................................................2-18
Pausing the printer..............................................................................2-18
Canceling a print.................................................................................2-19
Chapter 3 Printer options .................................................3-1
Returningto the defaultsettings ............................................................3-1
Printingthe settings...............................................................................3-1
Choosingprint mode options.................................................................3-3
Choosingpaper options ........................................................................3-5
Defining user setup...............................................................................3-9
Choosingink options...........................................................................3-10

1500TXUser'sGuide
viii
Chapter 4 Printer maintenance and storage...................4-1
Periodic maintenance...........................................................................4-1
Removingand storingink cartridges.....................................................4-3
Replacingthe reservoirs........................................................................4-4
Installingnew cartridges........................................................................4-4
Purging ink delivery lines......................................................................4-5
Periodic cleaning..................................................................................4-6
Cleaningthe service station..................................................................4-8
MaintainingtheNovaPrime..................................................................4-10
Preparing your printer for transport or storage...................................4-10
Returning the printer for service..........................................................4-11
Accessing printer information.............................................................4-11
Appendices
A Calibration.......................................................................................A-1
B Installing additional memory............................................................B-1
C User interface..................................................................................C-1
D Error messages...............................................................................D-1
E Glossary..........................................................................................E-1
F Technical information.......................................................................F-1
G Ordering supplies............................................................................G-1
H Serial cable.....................................................................................H-1
I Troubleshooting.................................................................................I-1

Introduction 1
This user guide covers the 1500 TX Digital Textile System.
1500 TX printers are wide-format color inkjet printers that give you
professional-quality output with all the brilliance liquid ink. For artists,
designers, and business professionals, ENCAD printers let you experi-
ence the creative freedom of exceptional graphics quality. The printer
cuts hours of production time, while giving you the dramatic impact of
highfidelityimages.
1500 TX printers are being used for many types of printing needs:
•Textiledesign •Strike-offs
•Sampleyardage •Posters/storyboards
•Banners •DTP
•Signs •Packagingprototypes
•Displays •Fine art
•Proofing •Exhibits
INTRODUCTI ON

1500TXUser'sGuide
1-2 Introduction
Printing with 1500 TX printers
The 1500 TX wide format inkjet printers let you create huge designs. The
length of your printed piece can be the length of a roll of media. Only
Extreme Color Printingcombines the technical sophistication of the
ENCAD printers with the unique qualities of ENCAD TX proprietary inks
and media, which includes a variety of popular fabrics, photogloss, coated
canvas, and matte paper.
These printers feature a continuous-feeding ink system which uses 500ml
reservoirs for each color, so you never have to worry about running out of
ink halfway through a big print job. Before starting a print job, just look at
the transparent plastic reservoirs to check the ink supply. When the ink
supply is low, just open the cap and refill.
The printers accept raster-oriented data in the form of HP RTL format.
In this mode, printing begins immediately after the first complete line of
HP RTL data is received. Depending on the software used, millions of
colors are possible, yielding superb results for continuous-tone images.
Your printer comes with TX Print, a software RIP designed specifically
for textile printing applications. It includes a visual interface, and features
which include tiling, rotating, and repeating of images.
Obtainingqualityresults
You have probably seen a demonstration of your printer's capabilities or
sample output. If so, you are aware of the superb color graphics which
can be obtained, and the variety of fabrics and papers you can use. Note,
however, that to obtain high-quality results, you must consider several
factors. Follow the simple guidelines in the sections that follow to obtain
excellentresults.