Kodak i1220 Plus User manual

EASTMAN KODAK COMPANY
343 State Street
Rochester, New York 14650 U.S.A.
A-61631 / Part #8F9723 June, 2009
© Eastman Kodak Company, 2009
TM: Kodak
i1200/i1300 Plus Series Scanners
Reference Guide
Cleaning the imaging area Indicator Lights and Error Codes
When an error occurs, the red indicator will blink
and one of the following codes will be displayed in
the Function window.
Code Problem Remedy
E 0 USB cable is
not connected Be sure the USB cable is securely connected to the
scanner and PC.
E 1 - E 5 Scanner failure Turn the scanner off, then
on again. Restart the
scanning application and
try again. If the problem
persists, contact Kodak
Service.
E 7; E 8
E 6 Scanner cover
open Close the scanner cover.
E 9 Document jam Open the scanner and
remove any paper in the
paper path.
Supplies and Accessories
CAT No. Description
148 4864 Kodak Feed Rollers
173 6115 Kodak Separation Module
826 9607 Kodak Feed Module
853 5981 Kodak Roller Cleaning Pads
169 0783 Kodak Transport Cleaning Sheets
896 5519 Staticide Wipes for Kodak Scanners
868 3724 Optics Cleaner Pad
892 7717 Kodak White Background Accessory
867 7288 Kodak A4 Flatbed Accessory
863 6870 Kodak Black Background Accessory for A4
179 6747 Kodak A3 Flatbed Accessory
Kodak Service & Support
www.kodak.com/go/disupport
1.800.822.1414
(US&C only; all other regions, contact your local
Kodak Support Center)
When contacting support, have the following available:
•A description of your problem
•Scanner model and serial number
•Computer configuration
•Software application you are using

IMPORTANT: The Roller Cleaning Pad contains sodium
lauryl ether sulfate which can cause eye
irritation. Refer to the MSDS for more
information.
Cleaning the rollers Cleaning and replacing the
separation module Cleaning and replacing the feed module
For detailed cleaning and replacement procedures see Chapter 4, Maintenance in the User’s Guide.