Kogan Shangri-La SLCHDOESG2A User manual

Shangri-La Set of 2 Organic Dining Chairs -
Eames and Saarinen Replica
SLCHDOESG2A
Quick Start Guide
Table of Contents
Safety and Warning ...........................................................................................................................2
Assembly ...............................................................................................................................................3

Safety and Warning
Read Instructions carefully. Check no parts are
missing.
Lay out all of the components on a soft surface as if
you were preparing to do a jigsaw puzzle.
Carefully identify each component, especially those
that are similar. The most common mistake is getting
things back to front
Separate and identify each component from the
hardware pack and rest each one in its proper location
before fastening.
DO NOT fully tighten screws (leave slightly loose).
When the item is fully assembled tighten the screws -
but do not overtighten.
Do not use power tools as they may damage the
material.

Assembly
First, check that you have all of the parts necessary. The parts required for your chair
are:
Place part “B” the bracket on the chair base, and add a washer, “D”, a spring washer
“E” and a nut, “F”. Repeat this for all sides:

Screw in the legs, and rotate your chair to the upright position:
Note: The included spacers, marked “H” can be used to level the chair. To do so,
remove the leg that requires extra height, and add a spacer in between. Fasten the
leg again. Do this to any side that requires it.
User manual is subject to change without notice. For the latest version of your user manual, please visit
https://www.kogan.com/usermanuals/