Kogan KAGLSKTTLEA User manual

Product Features
•Capacity: 1.8L
•LED screen display & 4 function buttons
•Adjustable heating te perature function (40 - 100°C)
•Keep-war function (40 - 90°C)
•Illu inated blue LED circle lights when powered
•Boil-dry protection
•Rapid boil syste
•Auto atic shut-off safety syste
•Cord co part ent
•360° rotation connection
•Safety lock lid
Part Names
1. Spout
2. Lid
3. Jug
4. Lid release button
5. LED display
6. - button
7. + button
8. ON/OFF button
9. Keep war button
10. Handle
11. Base
Function Description
Product specifications
Rated voltage/frequency: 220-240V 50/60Hz
Rated power: 1800-2200W
Function description
Standby
The digital display will show 888, then there will be a beep sound.
The current te perature will then display.
Power switch (as shown at right)
Click the Power switch and the display will show the current
te perature of the water, then it will begin heating the water up to
100°C. When the water reaches 100°C, the kettle will turn off
auto atically.
Te perature
adjust buttons
Power
switch
Keep war
switch

Click the power switch, then while the water is heating, you can press the te perature
adjust buttons to regulate the desired te perature. Once set, the display will flash 3
ti es, then the water will heat to the desired te perature before the kettle turns off.
The te perature will default to 100°C, and the te perature adjust button will change
the desired te perature by +/-5°C per press.
Keep warm switch (as shown on previous page)
In standby ode, pressing the keep war button will put the kettle into a keep war
ode, which will default to 50°C. The te perature display will flash 5 ti es and the
keep war ode will be in standby without heating. Press the power button to start
the unit heating. Once the chosen te perature has been reached, the kettle will sound
5 quick successive tones. The kettle will hold this te perature for as long as it re ains
in keep war ode.
Temperature adjust buttons (+/- (as shown on previous page)
Press these buttons to adjust the desired water te perature in the kettle. Each press
will alter the te perature by +/-5°C.
Operation
It is reco ended that upon first use, you operate the kettle several ti es as explained
below, then discard the water to rid the kettle of dust or other aterials fro the
anufacturing process.
1. Open the lid by pressing down the lid release button, then fill the kettle with
water. Then close the lid, as the auto atic cut-off function will not operate once
the water is boiling with the lid open.
Caution: the water level ust be between the “ ax” and “ in” levels as
indicated in the housing. Too little water will cause da age to the heating
ele ent, whereas too uch water ay result in water spilling fro the top
during boiling.
2. Place the kettle onto the power base and connect the base to the power supply.
Place the kettle so that the spout of the kettle is facing away fro you and other
people.
3. Click the power switch and the water will start to heat up. Do not open the lid
while the water is boiling.
Caution: ensure that the switch is clear of obstructions and that the lid is fir ly
closed. The kettle will not turn off if the switch is blocked or the lid is open.
4. Power will cut off once water is boiled.
5. Lift the kettle up fro the base and pour the water.
Note: operate carefully and pour the water away fro you, as boiling water will
scald.
6. If you press the power switch again, the kettle will go into standby ode and will
display the current te perature of the water.
Caution: never operate the kettle while e pty. In the event of this happening, the
ther al cut-off inside the kettle would operate, cutting off the power
auto atically. Unplug the appliance and allow it to cool down co pletely before
using it again.
Note: ensure the power is turned off when the kettle is not in use.

Important Safeguards
When using the kettle, the following safety precautions should always be followed.
•Read all instructions before use.
•Before connecting the kettle to the power supply, check that the voltage
indicated on the appliance corresponds with the voltage in your ho e/office. If
this is not the case, contact the Kogan custo er support tea and DO NOT
operate the kettle.
•Unplug the kettle fro the outlet when not in use.
•Do not let the cord hang over the edge of the table or counter, and do not let it
touch a hot surface.
•Place the kettle on a flat surface. Do not place on a heated surface or near a hot
gas or electric burner, or in a heated oven.
•To protect against electric shock, do not i erse cord, plug, power base or
kettle into water or any other liquids.
•Ensure that the kettle is on a fir , flat surface and out of reach of children.
•This appliance is for boiling water only. Do not use for ilk, coffee or tea. When
boiling, ensure the water is between the MIN and MAX levels.
•Do not touch the hot surface. Use the handle and knobs only.
•Do not use the kettle if it has a da aged cord or plug, or after the kettle has
alfunctioned. Contact the Kogan custo er support tea .
•Do not let children play with this product.
•Be careful when opening the lid for refilling when the kettle is hot.
•Avoid contact with stea or vapors fro the spout when water is boiling or just
after it has been turned off.
•The kettle can only be used with the stand provided. Do not use the kettle for
anything other than its intended use.
Cleaning and maintenance
•Re ove the plug fro the wall outlet and let the appliance co pletely cool
down before cleaning.
•Do not i erse the power cord, kettle or base in water.
If you have any concerns or questions, please contact the Kogan customer support
team.