Kogan 7 Series User manual

40
SERIES 7 GF7600
KALED40GF7600VA
FHD LED TV

A Kogan 40” FULL HD
LED TV
B Remote control
C Stand (x2)
D Ba4 x 18mm screw (x4)
E AAA battery (x2)
F Quick-start guide
G Warranty card
B C D
E G
A
(KALED40 RT92 20SVA)
SERIES 9 RT9220
40" SMART F ULL HD LED TV
QUICK STARTGUIDE
F

BA4X18 (4 PCS)
1b
Spread cushioning flat to lay the TV on. This will help to prevent damage.
Insert two 18 mm screws for each stand, and use Phillips head screwdriver
(not supplied) to tighten.
BEFORE YOU GET STARTED
1. Stand assembly
a. Attach stands to base of TV.
b.
2. Remote control assembly
a. Open the battery compartment cover on the back side.
b. Insert two 1.5V AAA size batteries, making sure to match the polarity markings
(+ / -) of the batteries with the diagram inside the compartment.
c. Replace battery compartment cover.
2a 2b 2c
6
ASSEMBLY AND INSTALLATION
1a

Connect the power supply, enter the standby mode (red light), press the
power button of the TV or the power button on the remote control to
turn on the TV.