Kogan KALED40XXXTB User manual

Caution
Safety Information
Names of each part
Accessories
Front View
Back View
1
2
Remote Control
Basic Operation
OSD Menu
1. Picture menu
2. Sound menu
3. Channel menu
Specifications
Trouble shooting
5. Setup menu
Multimedia Operation
Important Unique Buttons
Teletext
Contents
-
-
1.
2.
3.
-3
4
4
5
4 - 5
6 - 7
89
10-15
10
11
12
14-15
4. Feature menu 13
16-18
19
20
21 22
23

Caution
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE)
components which can be recycled and reused.
of-life should be disposed of separately from your household waste.
Please dispose of thisequipment at yourlocal community wastecollection/
recycling center.
The exclamation point within an equilateral triangle is intend to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated “dangerous
to constitute a risk of electric shock to the persons.
directives.
Your product is designed and manufactured with high quality materials
and
This symbol means that electrical and electronic equipment, at their
end-
voltage” within the products enclosure that may be of sufficient
magnitude
_________
1

Safety Information
To ensure reliable and safe operation of this equipment, please carefully read all the
instructions in this user guide, especially the safety information below
.
Electrical safety
vTo prevent overload, don't share the same mains supply socket with too many other
items of equipment.
- Do not place any connection wires where they may be stepped on or tripped over.
- Do not place heavy items on the leads, which may damage them.
- Hold the Mains plug, not the wires, when removing from a socket.
(if outdoor) and mains power from the supply.
- Do not allow water or moisture to enter the TV. Do NOT use in wet
or moist areas such as bathrooms, steamy kitchens or near swimming pools.
v8]TT\PMXT]OW]\QUUMLQI\Ml y, and seek professional help if:
- the mains plug or cable is damaged.
- liquid is spilt onto the set, or if it is accidentally exposed to water or moisture.
- anything accidentally penetrates the ventilation slots.
- the set does not work normally.
- Do NOT remove the safety covers.There are no user serviceable parts inside.
You may invalidate the warranty. Qualified personnel only are permitted to service
this apparatus.
- To avoid battery leakage, remove exhausted batteries from the remote control
handset, or when not using for along period.
- Do NOT break open or throw exhausted batteries on a fire.
Physical safety
v,W67T block ventilation slots in the back cover. . You may place theTV in a cabinet,
but ensure at least 5cm (2") clearance all around the unit.
v,W67T tap or shake theTV screen, you may damage the internal circuitry. . Take good
care of the remote control, do not drop it or allow it to come into contact with liquids.
v<WKTMIV\PM<>][MI[WN\LZaKTW\P,W67<][M[WT^MV\[Wr petrol based fluids. For
stubborn stains, you may use a damp soft cloth with diluted detergent.
_________
2
Figures and illustrations in this User Manual are provided for reference only
and may differ from actual product appearance. Product design and
specifications may be changed without notice.
- During a thunderstorm or while leaving the TV for long periods, disconnect the
aerial

Safety Information
IMPORTANT INFORMATION
a. Use cabinets or stands recommended by the manufacturer of the television.
b. Only use furniture that can safely support the television.
d. Do not place the television on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and the television to a suitable
support.
e. Do not stand the television on cloth or other materials placed between the
television or its controls.
g. The television must to be positioned in a horizontal, stable, un-slippery plane
to avoid sliding.
c. Ensure that the television is not overhanging the edge of the supporting furniture.
television and supporting furniture.
f. Educate children about the dangers of climbing on furniture to reach the
_________
3

Names of each part
Remote Control
Front View
MENU: Display/exit the OSD menu.
:Turn on/standby the TV set.
: To switch the signal source.
VOL
+-: Adjust the volume.
+ CH - : Scan through channels.
123
56
4
789
0
AUDIO
ENTER
INFO
SOURCE
MENU
LIST
EPG
SLEEP
STILL
SUBTITLE
RADIO
INDEX
EXIT
i
?
I/II
POWER
DMP
_________
4

Names of each part
9
26
YPbPr
5
1
3
USB
7HDMI
8
4
Back View
3
7
2
9
8
456
1
PC
2
1
7
7
_________
5
3 (ARC)
AV/YPbPr R/L

Remote Control
The buttons of the remote control are as following:
Remote Control
1. : Power, switch on or off TV set.
2. INFO: Press to display the current
program information on the screen.
i
: Go to the index page.
3. : Press to mute or restore sound.
4. NUMBER BUTTONS: Choose channels
or password entry.
5. SOURCE: Press to select signal source.
?
: Reveal the hidden information of
some teletext pages.
to switch between NICAM DUALⅠ/
NICAM DUALⅡ/ NICAM DUALⅠ+Ⅱ
/MONO and switch Audio language in
DTV mode.
7.
8.
: Return to last viewed program.
9.
for various optional adjustable settings.
10.
EXIT
11.
ENTER: Press to execute the selected
item in the menu screen or enter the
desired value in any input mode.
13.
VOL+/VOL-: Press to adjust the volume
level up or down.
14.
CH+/CH-: Press to select channels in
ascending or descending order.
15. SLEEP: Press to set the sleep timer.
When the preset length of time has
16.
LIST: Press to call up the channel list.
Press again to exit it.
17. EPG: Electronic Program Guide, usedin
the DTV mode.
0
25
26
27
:Exit OSD Menu.
12.
▲/▼/◄/►:To select the direction.
INDEX: Press to enter the Recorded list.
(In DTV mode)
: Switch on/off the favorite programs list.
18.
MENU: Press to enter the menu screen
6. AUDIO(∞I/II): The button can be used
passed, the TV set enters standby mode.
_________
6

NOTE:
All pictures in this manual are examples, only for reference, actual product may differ
from the pictures.
Any buttons not mentioned here are not used.
Remote Control
Remote Control
19. COLOUR BUTTONS: Red/ green/ yellow/
blue key navigation link.
: Fast reverse (in USB mode).
: Fast forward (in USB mode).
: Previous (in USB mode).
: Next (in USB mode).
20. STILL: Press to hold the picture.
: Hold the teletext page on display,
press again to release.
21. : Enter the Teletext, press again for
MIX mode, press this button again to
exit.
22.
: Enter subtitle mode or subpage.
23.
RADIO: Press to interchange Radio and
DTV programs when there is Radio
program (In DTV mode).
24.
: Cancel the teletext but not to exit
teletext, press again to exit.
25.
: Press button to start recording.
26.
(In PVR mode).
0
25
26
27
: Press to select different images sizes.
: Change size of teletext screen in
display mode.
27.
DMP: Press to switch to the USB source.
: Stop (in USB
: Play / Pause (in USB mode).
_________
7
mode/PVR mode).

Basic Operation
QUICK START GUIDE
• Connection
1. Connecting the mains and antenna.
2. Press Power button on the remote to turn on the TV.
• First Time Setup
When the TV is initially powered on, a sequence of on-screen prompts will assist in
configuring basic settings.
OSD Language
Press the◄/►button to select the desired OSD (On Screen Display) language.
Mode Setting
Press the◄/►button to select Home Mode or Store Mode.
Country
Press the◄/►button to select the country.
Auto Scan
Press the◄/►button to select mode: DTV+ATV, DTV, ATV.
Turningonandoff
• Turning the TV on
• Turning the TV off
Press the button on the remote control to enter standby mode.
Do not leave your set in standby mode for long periods of time. It is best to unplug the
set from the mains and aerial.
• No signal
There is No Signal menu on screen when there is no input signal. In ATV/DTV mode,
set will automatically turn off in 5minuteswith no input signal. When VGA cable is
connected, the TV turns on automatically.
ProgrammeSelection
• Using the CH+/CH- on the panel of TV or on the remote control.
Press CH+ to increase channel number.
Press CH - to decrease channel number.
• Using 0- 9 digital buttons.
You can select the channel number by pressing 0 to 9. (In ATV, DTV mode)
• Example
To select - channel (e.g. Channel 5): Press 5.
To select -- channel (e.g. Channel 23): Press 2 and 3within a short time.
button on remote control can turn on TV from standby mode.
Press the
If TV has a power switch, turn it on firstly.
Connect the AC input cable.
if there is no signal in 15 minutes, the TV will turn off automatically. In PC mode, the
TV
_________
8

Volumeadjustment
• Press the VOL+/- button to adjust the volume.
• If you want to switch the sound OFF, press the .
• You can release mute by pressing the or increase the volume.
ChangingtheInputSource
You can select the input source by pressing the SOURCE button on the remote control.
Press the▲/▼button to cycle through the input sources, and press the ENTER button to
confirm your choice.
HowtoNavigateMenus
Before using the TV follow the steps below to learn how to navigate the menusin order
to select and adjust different functions. The access stepsmay differ depending on the
selected menu.
1. Press the MENU button to display the main menu.
2. Press the◄/►button to cycle through the main menu.
3. Press the▲/▼button to select the desired sub item.
4. Press the ENTER button to access the submenu.
5. Press the ▲/▼/◄/►button to select the desired value. The adjustment in the
OSD may differ depending on the selected menu.
6. Press the MENU button to return to the previous menu.
7. Press the EXIT button exit from the menu.
NOTE:
When an item in MENU is displayed gray, it means that the item is not available or
cannot be adjusted.
Buttons on the TV have the same function as corresponding buttons on the remote
control. If your remote control is lost or will not work, you may use the buttons on the
TV to select menus. This manual focuses on operationsof the remote control.
Some items in the menus may be hidden depending on modes or signal sources
used.
Basic Operation
_________
9

OSD Menu
ConfiguringthePictureMenu
• Picture Mode
You can select the type of picture that
best corresponds to your viewing
requirements.
• Brightness
Adjusts the base level of the signal in the
picture.
• Contrast
Adjusts the signal level between black
and white in the picture.
• Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the
picture.
• Saturation
Adjusts intensity of all colours.
• Hue (Only available in NTSC mode)
Adjusts the balance between red and green levels.
• Colour Temp
Select the colour temperature of the picture.
• Aspect Ratio
You can select the picture size which best corresponds to your viewing requirements.
• PC Setting (In PC mode)
Auto Adjust: Adjust the image automatically.
H Position: Centre the image by moving it left or right.
V Position: Centre the image by moving it up or down.
Phase: Minimize horizontal distortion.
Clock: Minimize vertical stripes in the screen image.
• Advanced Settings
NR: Set options to reduce video noise.
MPEG NR: Set options to reduce MPEG noise.
Dynamic Contrast: Automatically adjust picture detail and brightness.
_________
10

ConfiguringtheSoundMenu
• Sound Mode
You can select a sound mode to suit
your personal preferences.
• Treble
Adjust the treble effect. Increases or
decreases high-pitched sounds.
• Bass
Adjust the bass effect. Increases or
decreases lower-pitched sounds.
• Balance
You can adjust the sound balance of the
speakers to preferred levels.
• Surround Sound
You can select a desired Surround Sound mode.
• EQ Setting
Adjust the curve of 7 bands equalizer.
EQ Mode: Only in User mode, the following can be manually adjusted.
120Hz/300Hz/500Hz/1.2KHz/3.0KHz/7.5KHz/10KHz: Adjusts the level of specific
bandwidth frequencies.
Based on your favourites about which frequency band need to be adjusted, make small
adjustment with certain frequency band at a time. We suggest NOT making too large
changes.
• AVL
AVL automatically remains on the same level of volume if you change programmes.
Because each broadcasting station has its own signal conditions, volume adjustment
may be needed every time when the channel is changed. This feature allows users to
enjoy stable volume levels by making automatic adjustments for each program.
• SPDIF
You can select a desired SPDIF Output mode.
• Audio Description (In DTV mode)
Press the▲/▼button to select Audio Description, then press the ► button to enter
sub-menu.
Press the▲/▼ buttonsto select Mode, then press the ◄/► buttonsto select On, Off.
When the mode is On, Volume can be adjusted by users.
• Sound Type (In DTV mode)
Press the▲/▼buttonsto select Sound Type, then press the ◄/► buttonsto select.
OSD Menu
_________
11

OSD Menu
ConfiguringtheChannelMenu
• Auto Scan
Press the ENTER button to enter
sub-menu.
Mode: Press the◄/►button to select Mode:
DTV+ATV, DTV, ATV.
• Manual Scan
Press the ENTER button to enter sub-menu.
- Digital Manual Scan: Press the▲/▼button to select the Digital Manual Scan, then
press the ENTER button to enter sub-menu.
Digital Scan: Press the◄/►button to select the channel number.
Start: Press the ENTER button to start the channel searching.
Frequency: Display the frequency of current TV signal.
Strength: Display the quality of current TV signal.
Country: Press the◄/►button to select
country.
Start: Press the ENTER button to start the
auto searching.
- Analog Manual Scan: Press the▲/▼ button to select the Analog Manual Scan, then
press the ENTER button to enter sub-menu.
Analog Scan: Press the◄/► button to select Analog Scan.
Channel to Save: Press the◄/► button to select channel.
Color System: Press the◄/► button to select Color System.
Sound System: Press the◄/► button to select Sound System.
AFC: Press the◄/► button to select On or Off.
Start: Press the ENTER button to start the channel searching.
• Channel Edit
First press the▲/▼button to highlight the channel you want to delete or skip or swap,
then:
Press the red button to delete the channel.
Press the green button to skip the select channel.
(Your TV set will skip the channel automatically when using CH+/- to view the
channels.)
Press the blue button to set the channel to moving state, then press the▲/▼buttonsto
move it to the position you want to put it.
• Signal Information (In DTV mode)
Display the current Signal Information.
Press the yellow button to rename the channel.
(In ATV mode)
_________
12

OSD Menu
ConfiguringtheLockSystemMenu
• Enter Password
The following items are only available if
the password input is correct.
Default password is 0000, and if you forget
what you set, please call the service c
Enable
enter.
•
, Parental Rating and Lock
•
ct the channel you want
•
tonsto select Parental Rating, then press ◄/► buttonsto select.
•
t from being used by young children, or other unexpected usage.
Channel Locks
Keypad are available when Enable is On.
Channel Locks
Press▲/▼to sele
to lock, then press ENTER to set it to lock.
Parental Rating
Press the▲/▼but
Lock Keypad
Set to prevent i
•
tton to select New Password, then enter a 4-digital number you want
•
ock System settings to the factory default.
New Password
Press the▲/▼bu
to set,twice.
Clear Lock
Restore the L
_________
13

C
onfiguringtheSetupMenu
red On Screen
•
audio language.
Rbutton
•
▲/▼ buttonsto select Subtitle, then press ENTER button to enter sub-menu.
• t
letext settings. Only available under DTV and ATV source.
nter sub-menu.
•
utton to select Time Settings, then press ENTER button to enter
de automatically.
ENTER button to enter
• OSD Language
Select your prefer
Display language.
Audio Languages (In DTV mode)
Select your preferred
(Available for digital channels if multiple
audio languages are broadcast.)
Press the▲/▼button to select Audio
Languages, then press ENTE
to enter sub-menu.
Press the arrow button to select the
Audio Primary Language and Audio
Secondary Language.
Subtitle (In DTV mode)
Press the
Press the▲/▼ buttonsto select Mode, then press◄/► buttonsto select On or Off.
Press the arrow button to select the Subtitle Primary Language and Subtitle
Secondary Language.
Press the▲/▼ buttonsto select Hearing Impaired, then press◄/►buttonsto select On
or Off.
Teletex
Adjust Te
Press the▲/▼button to select Teletext, then press ENTER button to e
Under DTV source, press◄/►button to select Digital Teletext Language.
Under ATV source, press◄/►button to select Decoding Page Language.
Time Settings
Press the▲/▼b
sub-menu.
OSD Time: Select On-Screen Menu displaying time.
Sleep Timer: Select the time to turn the TV to standby mo
Auto Sleep: Select the Auto Sleep time you want.
Time Zone: Select your time zone.
tTime, then pressTime: Press the▲/▼button to selec
sub-menu. Set Auto Sync to Off, then you can set the time manually.
Note: In the case of total loss of power, the clock setting will be lost.
• Mode Setting
OSD Menu
•HDMI CEC Control
utton to selectPress the▲/▼b
sub-menu.
Press the▲/▼button to select then press◄/►button to select
On or Off.
HDMI CEC Control,
Press the▲/▼button to select ARC, then press◄/►button to select On or Off.
HDMI CEC Control, then press ENTER button to
enter
_________
14
Press◄/►button to select E-POP mode or Home Mode.

• PVR Settings (In DTV mode)
ect PVR Settings, then press ENTER button to enter
lay the Recorded list.
o.
e recording devices
eduled recording.
igital program recording
button to record the current program. During the
roadcast television.
isk must at least be of 512MB capacity.
could not be recorded to.
ng is in
f

•
elp you to setup the TV.
•
the system settings to the factory default.
Press the▲/▼button to sel
sub-menu.
It will check the USB.
File Manager: To disp
Replay: Press the red button to replay a video.
Delete One: Press the green button to delete a vide
Delete All: Press the yellow button to delete all videos.
Zoom In: Press the blue button to zoom in the video.
Device List: When multiple recording devieds are connected, th
are listed. Select one recording device in the Device List.
Format: Press the red button to format USB disk.
Scheduled Record: To set the parameters for sch
Press the ENTER button to set the parameters for recording.
Delete One: Press the green button to delete a video.
Delete All: Press the yellow button to delete all video.
D
1. Insert a USB disk.Press
recording, press button to zoom in/out the record menu.
2. Press button to stop recording, it will return to normal b
NOTE:
USB d
Please format the inserted USB disk when it
During the Device formatting, do not disconnect the device while formatti
progress. If you format the device, all files will be deleted. Before formatting your
device to the TV, please back up your files to prevent them from damage or loss o
data.
If PVR recording system is used all the time, it will exit PVR system automatically.
USB memory must support USB 2.0 high-speed transfers.
Some nonstandard USB devicesmay not be supported.
First Time Setup
This is a guide to h
Reset
Restore
of them to perform recording.
When an USB device has several partitions,the PVR system can help to choose
anyone
OSD Menu
_________
15

Me
singUSBmodeU
• To Access/Quit USB mode
1. Connect a USB device.
2. Press SOURCE button to display the main menu. Use the ▲/▼to highlight USB,
3. u to exit from the USB mode.
devicesmay be not or well supported.
• he formats supported
Decoder
and the ENTER button to access the USB mode.
You may also use the signal source selection men
NOTE:
Special USB
USB max. Load: DC5V 500mA
T
Multimedia File Extensi
Categories on Video Decod io Decode Notes
e Aud
*.avi
MPEG-1
MPMPEG-2
MPEG-4 SP
MPEG-4 ASP
MPEG-4 XVID
DivX
(AVC)H.264
MP@Level 4
el 4HP@Lev
MPEG(*.mpeg,
*.mpg, *.dat, *vob)
MPEG-1 MP
MPEG-2 MP
MPEG-4(*.mp4)
MPEG-1 Layer 2
1
MPGE1/MPEG2/M
MPEG-4 SP
MPEG-4 ASP
MPEG.-4 XVID
H.264(AVC)
MP@Level 4
H.264(AVC)
HP@Level 4
MPEG-1 Layer 3
MPEG-2 Layer 3
AC3
LCAAC-
HE-AAC V
HE-AAC V2
PEG4:
Up to 1080p @ 30F
H.264: Up to 1080p
@ 25F
AAC: AAC-LC(type
2),
HE-AAC v1(type
5,SBR),
HE-AAC v2(type
29,SBR+PS)
TS(*.ts, *.trp, *tp)
MPEG-1
MPMPEG-2
H.264(AVC)
MP@Level 4
H.264(AVC)
HP@Level 4
MKV(*.mkv)
MPEG-1
MPMPEG-2
MPEG-4 SP
MPEG-4 ASP
MPEG-4 XVID
H.264(AVC) MP
@Level 4
H.264(AVC) HP
@ Level 4
Movie
*.flv
H.264(AVC) MP
@ Level 4
H.264(AVC) HP
@ Level 4
H.264(AVC)
Multimedia Operation
_________
16

MPEG-1 Layer 3
*.mp3
Bit Rate: up to
320Kbps
.1KHz,
MPEG-2 Layer 3
Sample Rate:
32KHz, 44
48KHz
AAC(*.aac,*m4a)
C V2
AAC
HE-AAC V1
HE-AA
Music
*.wav
LPCM
ADPCM
Baseline Mode
72x72 < B seline
resolution <
a
7680x4320
Photo *.jpg
*.jpeg
Progressive
Mode
e
ze <=1280x1024
Progressive Mod
Si
File Size <=10MB
Text *.txt
TF-8
UNICODE
U
ASCII
File Size <=1MB
No x 500 files su d each folder.te: Ma pporte
N
ot be or well be supported by the USB.
orted,
•
OTE:
l algorithm documents may nSpecia
The USB supports the formatsmentioned above, if the file format is not supp
change it to the given format.
ain Operating InterfaceM
Use the ◄/►button to select Photo, Music, Movie or Text. Press ENTER button enter
into sub-menu.
Me
Multimedia Operation
_________
17

hoto
e ◄/►button to select Photo in the main menu, then press ENTER button to
he ◄/►button to select disk you want to watch, then press ENTER button to
he CH+/- button to change page.
quick menu.
the ENTER button.
P
Press th
enter.
Press t
enter.
Press t
Press the INDEX button to access to the
Use the arrow buttons to highlight the folder, and then press
Use the arrow buttons to highlight a file, and then press the button to play.
Press the to stop the playing files.
Press the EXIT button to back to the previous menu.
usic
e ◄/►button to select Music in the main menu, then press ENTER button to
he ▲/▼button to select disk you want to watch, then press ENTER button to
he ◄/►button to change page.
quick menu.
ess the ENTER button.
M
Press th
enter.
Press t
enter.
Press t
Press the INDEX button to access to the
Use the ▲/▼button to highlight the folder, and then pr
Use the ▲/▼button to highlight a file, and then press the button to play.
Press the to stop the playing files.
Press the EXIT button to back to the previous menu.
ovie
e ◄/►button to select Movie in the main menu, then press ENTER button to
he ▲/▼button to select disk you want to watch, then press ENTER button to
he ◄/►button to change page.
quick menu.
ess the ENTER button.
M
Press th
enter.
Press t
enter.
Press t
Press the INDEX button to access to the
Use the ▲/▼button to highlight the folder, and then pr
Use the ▲/▼button to highlight a file, and then press the button to play.
Press the to stop the playing files.
Press the EXIT button to back to the previous menu.
ext
the ◄/►button to select Text in the main menu, then press ENTER button to
he ▲/▼button to select disk you want to watch, then press ENTER button to
he ◄/►button to change page.
quick menu.
ess the ENTER button.
T
Press
enter.
Press t
enter.
Press t
Press the INDEX button to access to the
Use the ▲/▼button to highlight the folder, and then pr
Use the ▲/▼button to highlight a file, and then press the button to play.
Press the EXIT button to back to the previous menu.
Me
Multimedia Operation
_________
18