Kogan KAMN32FCSA User manual

32” FULL HD CURVED
FREESYNC GAMING MONITOR
1920 X 1080, 75HZ
KAMN32FCSA

• Read all instructions before using this monitor and retain this user guide for future
reference.
• This monitor is designed with ventilation holes on the back of the casing. Do not cover
or block them.
• Do not insert any object or spray any liquid into the vents.
• Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat, as
well as in rooms lacking adequate ventilation.
• Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged
and may injure nearby people.
• Unplug the monitor if it is not going to be used for an extended period.
• Do not place heavy objects on the monitor, its power cord or any connected cable.
• Do not open the back panel of the monitor as it contains a high-voltage current even
when not plugged in.
• There is a polariser layer (not a protective film) on the surface of the screen. Do not peel
it off or the monitor may be damaged.
The terms HDMI and HDMI High-Definition Multimedia
Interface and the HDMI logo are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc. in the
United States and other countries.
SAFETY & WARNINGS

Monitor
Stand arm
Stand base
M4x10mm Screw (x2)
VESA screws (x4)
HDMI cable
Power cable
User guide
COMPONENTS

Monitor Controls
1. Power button
• Press and hold the power button for 6 seconds to turn your monitor on/off.
• If the monitor has gone to sleep, press the power button to wake up the display.
• In addition to its power function, the power button also serves as a directional button.
When navigating the on-screen menu, you can use the power button to move up,
down, left, and right, just like a joystick. This makes it easy to navigate through the
monitor's settings and options.
OVERVIEW
1

Monitor Ports
2
HDMI port
3
VGA port
4
Audio in (3.5mm)
5
Power input port
2
3
4
5

1. Carefully remove the monitor, stand
arm and stand base from the box.
2. Attach the stand base to the stand
arm using the M4 screws provided.
3. Insert the connection block into the
rear of the monitor and push down
until firmly connected.
4. Lift the monitor up and remove the
bottom foam. Stand the monitor up
on the installed base.
STAND ASSEMBLY
WARNING: The panel of the monitor is fragile. Keep the foam
underneath the monitor screen while assembling the stand.

VESA mounting pattern 75 x 75mm, screw size M4.
Note: VESA mount and mounting accessories are not included.
1. Open the box, take out the monitor with protective foam attached and gently place
it on a desktop or table. Remove all components and the protective foam from the
back of the monitor.
If the monitor is already attached to the stand, press the quick release button to
remove the stand plate and detach the stand.
2. Assemble the mount as per the instructions provided with the mount.
VESA MOUNT
Stand base
Monitor
Stand arm
Stand
plate
Mount (not
included)

Power Cable
Connect the included power cable to the monitor power port, then connect the other end to
a power outlet.
Earphones (Audio Out)
Earphones, headphones or other audio devices can be connected to the 3.5mm audio port
(Audio Out) on the monitor. The monitor may need to be set as the PC’s default sound
output device.
CONNECTIVITY
Power cable
Earphones
(not included)

HDMI
In order for the monitor to receive HDMI signals from the computer, use the HDMI cable to
connect the monitor to the computer.
VGA
Connect a computer, DVD/Blu-ray player or console to the monitor using a VGA cable.
HDMI cable
(included)
VGA cable
(not included)

1. Connect the monitor to the input device via HDMI or VGA.
2. Connect the power cable to the monitor, then connect the other end directly to an
electrical socket.
3. Use the power button to turn the monitor on.
FreeSync
• In order to use this feature, ensure your hardware has FreeSync capability and the
graphics drivers are fully up to date.
• After connecting, you may receive a prompt to enable the feature on your computer. If
you do not receive the prompt, you may need to enable the function in your graphics
card menu.
• See your graphics card manufacturer’s documentation for instructions on how to turn
on and/or enable FreeSync.
On-Screen Display (OSD)
• The On-Screen Display (OSD) menu may be used to adjust your monitor’s settings.
• Turn the monitor on and press the power button to view the OSD menu.
• When using the monitor for the first time, the monitor will configure optimal settings
automatically.
• Press the power button to the right to enter the sub-menus.
• Press power button up and down to highlight an option, then press the power button to
confirm the settings and exit the current screen.
OPERATION

On-Screen Display (OSD) Functions
Main Menu
Sub-Menu
Options
Description
Brightness
Picture
~0-100
Adjust display brightness
Contrast
~0-100
Adjust display contrast
Blacklight
~0-100
Adjust display Blacklight
Low blue
On
Enable/disable blue light reduction
Off
ECO
STANDARD/
TEXT/GAME/
MOVIE/ FPS/RTS
Preset colour modes
DCR
On
Enable/disable dynamic contrast
ratio
Off
Image
Horizontal
position
~0-100
Adjust video display area left to right
(VGA only)
Vertical
position
~0-100
Adjust video display area up and
down (VGA only)
Clock
~0-100
Adjust display Clock
Phase
~0-100
Adjust display Phase
Aspect
Wide (16:9), 4:3
Adjust display Phase Aspect
FreeSync
On/Off
Adjust display FreeSync On/Off
Colour
Warm
mode
Red/green/blue
Adjust red/green/blue levels
Cool mode
Red/green/blue
Adjust red/green/blue levels
User mode
Red/green/blue
Adjust red/green/blue levels
HDR mode
On/Off
Enable or disable HDR mode

OSD
Setting
Language
English, 简体中文
,한국어, Русский,
Español, Deutsch,
Italiano, Français,
Portugues,
Turkce, Polski,
Nederlands
Set OSD language
OSD H-
Position
~0-100
Adjust OSD horizontal position
OSD V-
Position
~0-100
Adjust OSD vertical position
OSD
Transparency
~0-100
Set OSD overall transparency
OSD Time
Out
5~60
Set how long the OSD remains open
after last input
Reset
Image
None
Restore VGA image defaults
Colour
None
Automatically configure VGA colour
settings
Reset
None
Restore factory defaults
Power down
On
Enable/disable Power down function
Off
Time count
10-90min
Adjust Time count
Misc
Signal source
VGA/HDMI
Adjust input source
ECO Modes
Press the power button to the left to switch ECO modes. These modes include STANDARD,
TEXT,GAME,MOVIE, FPS and RTS and can be used to optimise settings according to your
activity. Standard mode is suitable for most activities.

Screen size
32”
Aspect ratio
16:9
Brightness
300cd/m2(typical)
Panel
VA
Resolution
1920x1080
Refresh rate
75Hz
Response time
20ms(G to G)
Viewing angle
≥178°(H) / 178°(V)
Contrast ratio
3000:1
VESA mounting
75 x 75mm
Colours
16.7M
Signal input
HDMI 1.4 (x1), VGA (x1)
Power
100-240V~ 50/60Hz 1.1A
Audio
Speakers
NA
Audio out
YES
Accessories
Power cable
YES
HDMI cable
YES
Additional functions
Low Blue Light
YES
Flicker Free
YES
SPECIFICATIONS

Physical dimensions
Dimensions (w. Stand)
712.14x520.14x224.97 (mm)
Dimensions (w/o Stand)
712.14x520.14x224.97 (mm)
Net weight
6.07kg
Gross weight
8.28kg

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com