Kogan KAMN24F7SA User manual

24" FULL HD 75HZ FREESYNC
FRAMELESS MONITOR
(1920 X 1080)
KAMN24F7SA

• Read all instructions before using the appliance and retain for reference.
• Only use the power adapter provided with this product.
• Do not use the power adapter with any other products
• Unplug the monitor before cleaning it.
• Use a clean, slightly dampened cloth to wipe the monitor casing.
• To clean the screen, turn the monitor off, unplug it and wait for it to cool
completely. Then, wipe it with a dry micro-fibre cloth.
• Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
• Do not cover or block the ventilation holes in the monitor casing.
• Do not insert any object or spray any liquid into the vents.
• Do not place the monitor near heaters, stoves, fireplaces or other sources of heat,
as well as in rooms lacking adequate ventilation.
• Do not position the monitor in unsafe locations. If the monitor falls, it may be
damaged and may injure nearby people.
• Unplug the monitor if it is not going to be used for an extended period.
• Do not place heavy objects on the monitor, its power cord or any connected cable.
• Do not open the back panel of the monitor, as it contains a high-voltage current
even when not plugged in.
The Adopted Trademarks HDMI, HDMI High-Definition
Multimedia Interface and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc.
in the United States and other countries.
SAFETY & WARNINGS

Monitor
Stand arm
Stand base
Power adapter
M4x10mm Screw
VESA Screws
M4x10mm (x4)
HDMI cable
User guide
COMPONENTS

Button
Description
1
Menu
• Opens the OSD menu.
• Enters sub menus.
2
Down
Navigates down in the menu
3
Up
Navigates up in the menu
4
Exit
Exits the menu
5
Power
Turns the monitor On/Off.
OVERVIEW

Monitor Ports
6
HDMI port
7
VGA port
8
3.5mm headphone jack
9
Power input port

1. Carefully remove the monitor, stand
connector and stand base from the
box.
2. Attach the stand base to the stand
arm using the supplied M4x10mm
screw.
3. Insert the stand assembly into the rear
of the monitor and push down until
firmly connected.
4. Lift the monitor up straight and remove
the bottom foam. Stand the monitor
up on the installed base.
ASSEMBLY
WARNING: The panel of the monitor is fragile. Keep the foam
underneath the screen while assembling the stand.

VESA mounting pattern 75x75mm, screw size M4.
Note: VESA mount or mounting accessories are NOT included.
1. Open the box, remove the monitor with the protection form attached and gently place
it on a desktop or table.
2. Remove any extra parts or foam covering the rear of the monitor.
3. Press the release button to remove the stand plate. If the monitor was already
attached to the stand, remove the stand.
4. Assembly the mount according to instructions provided with the mount.
Stand base
VESA MOUNT
Stand arm
Monitor
Stand plate
Mount not
included

Before connecting the monitor to your computer, please shut down the computer and
ensure the monitor is switched off.
Power Cable
Connect the included power adapter to the monitor power port, then connect the other end
to a power outlet.
HDMI
Connect the supplied HDMI cable from the computer’s HDMI port to the monitor’s HDMI
port.
HDMI Cable (included)
CONNECTIVITY

VGA
Connect a VGA cable (not included) from the computer to the monitor’s VGA port.
Earphones
Plug in earphones (not supplied) into the 3.5mm headphone jack on the monitor.
Note: If audio devices are plugged into the monitor and computer, there will be no sound.
VGA Cable (Not included)
Earphones (Not included)