Kogan KAMN27Q18CSA User manual

27" Curved QHD 180Hz 1ms Gaming Monitor
(2560 x 1440)
KAMN27Q18CSA

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress
and the HDMI Logos are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc.

Monitor Stand connector
Stand base Stand base screw
(M4 x 10mm, x2) VESA screws
(M4 x 10mm, x4)
DisplayPort cable Power Adapter User guide
COMPONENTS
mm01
mm01
M4

Monitor Controls
1 Power button
a. press and hold the "OK key" for 6 seconds to turn
on and o.
b. When the display is turned on, click "OK" to wake
up the main menu for one second.
c. Select "direction key" to select the items to be
adjusted up and down in the main menu. Aer
selecting the items, click "OK" to adjust. Click "OK"
again to save and return to the upper menu.
OVERVIEW

Monitor Ports
2Power port (DC 12V)
3
4
DP2 connector
HDMI2 connector
5
HDMI1 connector
DP1 connector6
7AUDIO OUT
76
43 5
2

1. Carefully remove the monitor, stand
connector and stand base from the
box.
3. Insert the connection block into the
back cabinet and push down until
firmly connected.
2. Attach the stand base to the stand
connector using the M4 screw
provided.
4. Li monitor up straight and remove
the bottom foam. Stand the monitor
up on the installed base.
STAND ASSEMBLY
WARNING: The panel of the monitor is fragile.Keep the foam
underneath the monitor screen while assembling the stand.
VESA MOUNT
M4 x 10mm, x2

1. Open the box, take out the monitor with protection form attached and gently place it
on a desktop or table. Remove the extra parts and the foam covering the back of the
monitor. Press the release button to remove the stand plate. If the monitor was already
attached to the stand, remove the stand.
2. Assemble the mount as per the instructions provided with the mount.
VESA mounting pattern 75 x 75mm, screw size M4.
Note: VESA mount or mounting accessories are included.
NOT
Stand base
Monitor
Stand connector
Stand plate Mount ( not included)
VESA MOUNT
VESA MOUNT

Power cable
Connect the included Power Adapter to the monitor power port, then connect the other end to
a power outlet.
Earphones (Audio Out)
Earphones, headphones or other audio devices can be connected to the 3.5mm output on
the monitor. The monitor may need to be set as the PC’s default sound output device.
CONNECTIVITY
Power Adapter
Earphones
(Not Included)

HDMI
In order for the monitor to receive HDMI signals from the computer, use the HDMI cable to
connect the monitor to the computer.
DisplayPort
In order for the monitor to receive DisplayPort signals from the computer, use the
DisplayPort cable to connect the monitor to the computer.
HDMI Cable
(Not Included)
HDMI OUTPUT
PC
DP Cable
(Included)
DP

1. Connect the monitor to the input device via HDMI/ DisplayPort .
2. Connect the power cable to the monitor, then connect the other end directly to a
power socket.
3. Use the power button to turn the monitor on.
FreeSync
OPERATION

The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings and
appears on the screen aer turning on the monitor and pressing the “OK key” button.
When using the monitor for the first time, it will configure optimal settings automatically.
1. Press " OK key " touch right to activate the navigation window.
2. Press " OK key " to enter the OSD menu.
3. Select " direction key " to select the items to be adjusted up and down in the
main menu. Aer selecting the items, click " OK key " to adjust. Click " OK key "
again to save and return to the upper menu.
Auto Source DP1 DP2 HDMI1 HDMI2
QHD
Panel
180Hz
Freq.
80
Brightness
off
Freesync
50
Contrast
Brightness
Contrast
DCR
ECO
80
DP1 1920*1080@180Hz

Refer to the following pages for a detailed list of the OSD menu functions.
Menu Options Description
Brightness ~0-100 Adjust display brightness
Contrast ~0-100 Adjust display contrast
DCR On/ O Turns dynamic contrast ratio
on/o
ECO
STANDARD/PHOTO/
GAME/MOVIE/FPS/RTS/
sRGB
Preset colour modes
Colour Temperature
Normal
Select colour temperature mode or
allow manual colour configuration
(USER)
Warm
Cool
USER
Red ~0-100 Adjust red value
(USER mode only)
Green ~0-100 Adjust green value
(USER mode only)
Blue ~0-100 Adjust blue value
(USER mode only)
Language Set OSD language
OSD H-Position
OSD V-Position
OSD Transparency
0~100 Adjust OSD horizontal position
0~100 Adjust OSD vertical position
0~100 Set OSD overall transparency
OSD Time Out 5-60 Set how long the OSD remains
open aer last input
Input Source Auto Source/DP2/DP1/
HDMI1/HDMI2
Select input source or allow
manual selection
Mute ON/ OFF Enable or disable monitor speaker
output
Volume 0-100 Adjust monitor speaker volume
Reset / Uptate monitor firmware via USB
flash drive.
Sub-Menu

Aspect Ratio
Wide Screen
Select the display's aspect ratio
Auto
1:1
4:3
Low blue Light
O
Blue light reduction adjustment
Low
Medium
High
MaxHigh
Response Time On/O Enable or disable overdrive
for faster response time
FreeSync On/O Enable or disable AMD FreeSync
HDR On/O /Auto Enable or disable HDR
MPRT On/O when the refresh rate reaches
85Hz can MPRT be turned on.
1. Press " OK key " touch le button to switch ECO modes. These modes include STANDARD,
PHOTO,GAME,MOVIE,FPS,RTS,sRGB and can be used to optimise settings according to your
activity. Standard mode is suitable for most activities.
ECO MODES

Screen size
Aspect ratio 16:9
Brightness
Panel VA
Resolution 2560x1440
27
Refresh rate 180Hz
Response time 1 ms
Viewing angle
Contrast ratio 5000:1
VESA mounting 75 x 75mm
Colours 16.7M
Signal input HDMI 2.0 x 2, DP 1.4 x 2
Power 12 V --- 4.0A
Audio
Speakers
Audio out
Accessories
Power adapter
DisplayPort Cable
Additional functions
Low Blue Light
Flicker Free YES
YES
YES
YES
YES
YES
Physical dimensions
Dimensions (w. Stand) 614.1*463.7*202.9 (mm)
Dimensions (w/o Stand) 614.1*364.3*88.3 (mm)
Net weight 4.7 kg
Gross weight 6.4 kg
SPECIFICATIONS