Kogan KARDONEXVTA User manual

RIDE-ON EXCAVATOR
KARDONEXVTA

Warning! Not suitable for children under 3 years. Contains small parts.
This toy is to be assembled by an adult.
Warning:
To avoid danger of suffocation, keep the plastic bag
away from babies and children. The bag is not a toy.
SAFETY & WARNINGS

1. Attach each handle to the excavator arm by inserting the handle into the hole,
then turning until it locks securely into place. Repeat for both sides.
2. Insert the excavator arm’s strut bar into the slot at the front of the excavator. This
will hold the excavator arm upright.
3. To secure the arm in place, insert the rod into the side of the excavator’s body,
pushing deep until it locks onto the arm.
Figure 2
Figure 3
ASSEMBLY
To Disassemble:
To remove the rod holding the excavator arm in place, push the safety latch
on the rod (Figure 2) and pull out to remove (Figure 3).

The excavator has four controllable functions:
•Rolling wheels •Excavator arm
•Rotating body •Bucket
To control the bucket, pull the lever on the excavator arm. The bucket will lock into a set
position when the lever is released – move the lever again to unlock it.
OPERATION

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com.