Kohler Rapport K-1496-H2 User manual

Features
•Acrylic
•Variable speed pump with 1.5 kW heater and back-lit
user keypad
•6 FlexjetsTM
•Less all trim
•72-3/8″(183.8 cm) x 35-3/4″(90.8 cm) x 24-1/2″
(62.2 cm)
Codes/Standards Applicable
Specified model meets or exceeds the following:
•ASME A112.19.7M
•ANSI Z124.1.2
•UL 1795
6’ BATH WHIRLPOOL
K-1496-H2
Colors/Finishes
•0: White
•Other: Refer to Price Book for additional colors/finishes
Accessories
•0: White
•CP: Polished Chrome
•PB: Vibrant
®
Polished Brass
•NA: None applicable
•Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Description Colors/Finishes
K-1496-H2 6’ bath whirlpool ❑0❑Other_____
Required Accessories
K-9696 Jet trim kit ❑CP ❑PB ❑Other_____
Recommended Accessories
K-7161-AF Pop-up bath drain ❑CP ❑PB ❑Other_____
Optional Accessories
K-1179 Vinyl tiling-in bead (use when wall material contacts any top surface of bath) ❑NA
K-1491 Pillow ❑0❑Other_____
K-1601 Footstop ❑0❑Other_____
Product Specification
The acrylic bath whirlpool shall be 72-3/8″(183.8 cm) in length, 35-3/4″(90.8 cm) in width, and 24-1/2″(62.2 cm) in height.
Product shall have six Flexjets, a variable-speed pump with 1.5 kW heater, and back-lit user keypad. Product shall be less all
trim. Bath whirlpool shall be Kohler Model K-1496-H2-_______.
RAPPORT
®
Page 1 of 2
1022397-4-C
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com

Optional Accessories
K-1703 Remote control ❑NA
Technical Information
Fixture*:
Bathing well:
Basin area 45″(114.3 cm) x 26″(66 cm)
Top area 67″(170.2 cm) x 31″(78.7 cm)
Weight 123 lbs (55.8 kg)
To overflow:
Water depth 18″(45.7 cm)
Capacity 110 gal (416.4 L)
* Approximate measurements for comparison only.
Drop-in
cutout
70-3/4″(179.7 cm) x 34-5/8″(87.9 cm)
Pump: kW V Hz A
Variable-
speed:
1.5 240 50/60 11
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Pump/control 220/240 V, 20 A, 50/60 Hz
Locate the outlets behind the whirlpool and within 24”
(61 cm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
60 lbs/square foot (290 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
Pump/Control Access
34" (86.4 cm) W x
15" (38.1 cm) H
35-3/4" (90.8 cm)
3-1/2"
(8.9 cm)
3" (7.6 cm)
2-7/8" (7.3 cm)
1-1/2" OD
1/4" (6 mm)
24-1/2"
(62.2 cm)
3/4" (1.9 cm)
72-3/8" (183.8 cm)
36" (91.4 cm)
2" (5.1 cm) 8-1/2" (21.6 cm)
Product Diagram
RAPPORT
®
RAPPORT
®
6’ BATH WHIRLPOOL
Page2of2
1022397-4-C