1
Handling and Safety Precautions
These precautions should be strictly observed in order to ensure safe,
long-term use of the product.
The following precautions should be observed particularly strictly:
The default voltage setting for the heart and breathing sound source included with this
product is 110 V. When using the product outside of Japan, before use, be sure to conrm the
voltage of the region in which it will be used and change the voltage setting of the heart and
breathing sound source to 220 V if necessary.
(See page 8 for instructions for switching the voltage.)
1. This model is made to have the same feeling as living body. It may cause damage if and when you
handle it with force.
2. Please do not put objects on the main body of this model. That may lead to transformation of this
skin. Please do not use nor store the model at the place with high temperature. The skeleton may be
deformed.
3. Please store the model in the attached case while it is not used.
4. Please wipe stains of the model, with wet gauze etc. Using water or a neutral detergent diluting with
water. Please do not use thinner, benzine which damages the model.
5. Please do not use oily ink and painting, if they soak into the model, they never be removed.
6. Please store this model solvents such as in the place where no direct rays of the sun and/or ultraviolet
rays are.
7. Always remove the power cord from the unit before switching the AC voltage of the heart and
breathing sound source.
1. The contents of this instruction manual are subject to change without notice.
2. This instruction manual may not be reproduced in part or in its entirety without permission.
3. Please contact the manufacturer in the event that any errors or omissions are found in the contents of
this instruction manual.
4. This product should be used only as described in this instruction manual. In particular, the product
should not be used in any way that contravenes the precautions noted in the instruction manual.
