Komatsu HD1500-7 - User manual

GROSS HORSEPOWER
1109 kW 1,487 HP
NET HORSEPOWER
1048 kW 1,406 HP
MAXIMUM GVW
249478 kg 550,000 lb
Photo may include optional equipment
O
FF
-H
IGHWAY
T
RUCK
HD1500-7
HD
1500

2
OFF-HIGHWAY TRUCK
WALK-AROUND
HD1500-7
Productivity and Economy Features
●High performance Komatsu SDA12V160 engine
Net horsepower 1048kW 1,406HP
●Komatsu 7 speed, electronically controlled automatic
powershift transmission
●4-wheel oil-cooled, multiple-disc retarder
●Automatic Retard Speed Control (ARSC) standard
Reliability Features
●Flat face-to-face O-ring seals
●Sealed DT connectors
●Fully hydraulic brakes -
no air system

3
OFF-HIGHWAY TRUCK
HD1500-7
Photos may include optional equipment
Operator Environment and Control
●Spacious cab with excellent visibility
●Ergonomically-designed cab
●Easy-to-see instrument panel
●Advanced K-ATOMiCS with “Skip-shift”
function
●Built-in ROPS/FOPS cab (Level 2)
●Parking brake on input shaft
●Supplementary steering
●Push-button operated secondary brake
Easy Maintenance
●Oil-cooled multiple-disc brakes
and fully hydraulic-controlled
braking system
●Electric circuit breakers
●Vehicle Health Monitoring System
(VHMS)
●Remote mounted transmission
GROSS HORSEPOWER
1109 kW 1,487 HP @ 1900 rpm
NET HORSEPOWER
1048 kW 1,406 HP @ 1900 rpm
MAXIMUM GVW
249478 kg 550,000 lb

4
PRODUCTIVITY & ECONOMY FEATURES
OFF-HIGHWAY TRUCK
HD1500-7
High Performance Komatsu SDA12V160 Engine
The Komatsu SDA12V160 engine provides the highest
horsepower in it’s class. With 1487 gross horsepower, this
engine delivers faster acceleration and higher travel speeds
with a high horsepower-to-ton ratio. High torque at low
speed, impressive acceleration, and low fuel consumption
ensure maximum productivity. Standard features of this
engine include the Quantum electronic control system,
Cummins Cense monitoring and pre-lubrication.
Seven-Speed Electronically Controlled, Automatic
Powershift Transmission
Komatsu’s seven-speed, electronically controlled, automatic
powershift transmission uses a rubber damper to
comfortably reduce harmful engine shock and vibration to
the transmission. A lock-up system, consisting of a wet
multiple-disc clutch, is actuated in F1-F7 gears for higher
fuel savings. Electronic shift control with automatic clutch
modulation in all gears and full diagnostics with memory.
The transmission circuit uses a separate hydraulic circuit
and cooler.
Komatsu torque converter is transmission-mounted and
lock-up clutch is electronically controlled.
Maximum travel speed (empty, 2% rolling resistance)
Four-Wheel, Oil Cooled, Multiple Disc Brakes
The HD1500-7 is equipped with four wheel, oil cooled,
multiple disc brakes which provide the greatest retarding
capabilities in its class. Effective and smooth braking
characteristics are controlled through the retarding lever by
a system of pressure proportioning valves (PPC), which
precisely meter the appropriate amount of hydraulic
pressure to each brake assembly. The elimination of an air
system, common with dry disc brakes, improves reliability
and reduces maintenance costs.
Gear 1 11.0 km/h 6.8 mph Gear 5 32.7 km/h 20.3 mph
Gear 2 14.7 km/h 9.1 mph Gear 6 44.2 km/h 27.5 mph
Gear 3 19.7 km/h 12.2 mph Gear 7 58.4 km/h 36.3 mph
Gear 4 24.5 km/h 15.2 mph Reverse 9.4 km/h 5.8 mph

5
HD1500-7
OFF-HIGHWAY TRUCK
Photos may include optional equipment
Auto Retard Speed Control (ARSC)
ARSC allows the operator to simply set the downhill travel
speed and go down slopes at a constant speed. This allows
the operator to concentrate on steering. The speed can be
set at increments of 1 km/h 0.6 MPH per click
(±5 km/h 3.1 MPH of setting speed adjustment) to match
the optimum speed for the slope. The retarder cooling oil
temperature is constantly monitored and the descent speed
is automatically reduced, if necessary.
Go down
slope at
constant
speed
UP
SET
DOWN
CANCEL
AUTO RETARD
SPEED CONTROL
Automatic Idling Setting System (AISS)
This system facilitates quick engine warm-up and cab
cooling/warming. When setting the system ON,
engine idle speed is kept at 1000 rpm when
coolant temperature is 30°C 86°F or lower.
Speed automatically returns to 650 rpm when
coolant temperature goes above 30°C 86°F.
Small Turning Radius
The MacPherson strut type front suspension has a special
A-frame between each wheel and
the main frame. The wider
space created between the
front wheels and the main
frame increases the
turning angle of the
wheels. The larger this
turning angle, the smaller
the turning radius of the truck.

6
OFF-HIGHWAY TRUCK
HD1500-7
Long Wheelbase and Wide Tread
With an extra-long wheelbase, a wide tread, and an
exceptionally low center of gravity, the HD1500-7 hauls its
load at higher speed for greater productivity, and delivers
superior driving comfort over rough terrain.
Large Body
A wide target area makes for easy loading with minimal
spillage and more efficient hauling.
Heaped capacity : 78.0 m3102.0 yd3
Target area (inside length x width) :
7670 mm 25'2" x 5705 mm 18'8"
Advanced K-ATOMiCS
The electronically controlled all clutch modulation system,
“K-ATOMiCS”, optimizes the clutch engagement oil pressure
at every gear. This system optimizes the clutch lock-up
process for smoother shifting with minimal torque shock.
“Skip-shift” function
When driving uphill, the skip-shift function automatically
selects the gear according to the slope of the grade. It
reduces the number of down-shifts, makes the driving
smoother, improves the operator’s comfort, and reduces
spilling of material.
Supplementary Steering
Automatic supplementary steering is provided as a standard
feature.
The MacPherson Strut-Type Front Suspension
The MacPherson-type independent suspension is utilized
on the front wheels. This linkage arrangement allows the
front wheel to follow the undulation of the road surface
smoothly, realizing excellent riding comfort.
Push Button Actuated Auxiliary Brake
All four wet disc brakes are activated when the auxiliary
brake button, located on the dash board, is deployed.
In addition, the brakes will
automatically apply when the
hydraulic pressure drops
below the specified level.
Rear LED Lighting Rack
Frame mounted LED lighting rack at the rear of the truck
provides tail, brake, and flasher lights. In addition, this
bracket, protected from falling objects by the body
structure, includes the reverse horn and back-up lights.

7
HD1500-7
OFF-HIGHWAY TRUCK
OPERATOR ENVIRONMENT
Spacious Cab with Excellent Visibility
The HD1500-7 cab inherits the superior design features of
Komatsu's ultra-class haul trucks. Wide windows in the
front, side and back, plus plenty of space in the richly
upholstered interior, provide a quiet, comfortable
environment for better visibility and control over every
aspect of the operation.
Ergonomically Designed Cab
The comfortable and ergonomically-designed operator's
compartment makes it very easy for the operator to reach
all controls. The result is more confident operation and
greater productivity.
Easy-to-See Instrument Panel
The instrument panel makes it easy to monitor critical
machine functions. In addition, a caution light warns the
operator of any problems that may occur. Problems are
recorded in the monitor and indicated as service codes.
This makes the machine more user friendly and easier to
service. Ideal Driving Position Settings
The 5-way adjustable operator seat and the tilt-telescopic
steering column provide an optimum driving posture for
increased driving comfort and more control over machine
operation. The suspension seat dampens vibrations
transmitted from the machine and reduces operator fatigue
as well as holding the operator securely. A 78 mm 3" wide
seat belt is provided as standard equipment.
Photos may include optional equipment
Vehicle Health Monitoring System (VHMS)
VHMS controller monitors the health conditions of major
components and enables remote analysis of the machine
and its operation. This process is supported by the Komatsu
distributors, factory, and design team.
KOMATSU
WebCARE Server
Personal
computer
terminal
(for downloading
data)
Internet
Komatsu
distributors
Customer
job site
Satellite
communication (Option)

8
OFF-HIGHWAY TRUCK
HD1500-7
Body Dump System
Two 3-stage cylinders with
new concept design and
sealing system. Internal
cushion valve and over-
center damping provide
smooth, reliable dumping.
The quill design modulates
the body return speed after
dumping to manage forces
into the frame and
suspensions.
Hoist times
Power Up: 15 sec
Power Down: 15 sec
Integral Four-Post ROPS/FOPS Cab Structure
(Level 2)
Automatic Spin Regulator (ASR)
ASR automatically maximizes traction by preventing the
rear tires from slipping on either side.
Wet multi-disc brakes and fully hydraulic
controlled braking systems realize lower maintenance
costs and higher reliability. Wet disc brakes are fully sealed
to keep contaminants out, reducing wear and maintenance.
Brakes require no adjustments for wear, meaning even lower
maintenance.
Service brake and retarder are isolated from the other truck
hydraulic functions to ensure reliable performance. The
parking brake is a spring applied, oil released, 3 caliper dry
disc mounted on the input yoke to the differential. Fully
hydraulic braking systems eliminate the air system; air
bleeding is not required, and water condensation that can
lead to contamination, corrosion, and freezing is eliminated.
Automatic Lubrication System
The Lincoln Auto-lube system
features a deck mounted canister,
ground level refill point, and an
adjustable timer to ensure all pivot
points are properly greased.

9
High-Rigidity Frame
Front support is integrated
with the frame. The frame
rigidity has been
substantially increased. As
a result, flexural rigidity and
torsional rigidity, which are
indicators of drivability and ride
quality, are significantly improved.
Komatsu Components
Komatsu manufactures the torque converter,
transmission, hydraulic cylinders, and electrical parts on this
dump truck. Komatsu dump trucks are manufactured with an
integrated production system under strict quality control
system guidelines.
Sealed DT Connectors
Main harnesses and
controller connectors are
equipped with sealed DT
connectors providing high
reliability, water resistance,
and dust resistance.
Reliable Hydraulic System
A large capacity oil cooler is installed in each hydraulic
circuit, improving the reliability of the hydraulic units during
sudden temperature rises. Further, in addition to the main
filter, a β10 = 3 (min) line filter is located at the entrance to
the transmission control valve. This system helps prevent
secondary faults.
Flat Face-to-Face
O-Ring Seals
Flat face-to-face O-ring
seals are used to securely
seal all hydraulic hose
connections and to prevent
oil leakage.
O-ring
Nipple
Hose
Rugged and Durable Dump Body Design
The standard dump body is made of high-tensile-strength
steel with a Brinell hardness of 400 for excellent rigidity
and reduced maintenance
cost. The side and bottom
plates of the dump section
are reinforced with ribs for
added strength.
Protection Function Supported by Electronic Control
HD1500-7
OFF-HIGHWAY TRUCK
DASH-7 FEATURES
Item Function
Downshift inhibitor Even if the driver downshifts accidentally, a speed appropriate to the current gear is automatically set, limiting potential over-runs.
Over-run inhibitor When descending grades, if the vehicle’s speed surpasses the maximum for the current gear, the front and rear brakes
automatically operate, limiting potential over-runs.
Reverse inhibitor The vehicle is prevented from moving backward when operating the body.
Forward/Reverse shift inhibitor This device makes it impossible to shift from forward to reverse when the vehicle’s speed surpasses 4 km/hr 2.5mph.
Anti-hunting system When running near a shift point, smooth automatic shifting takes place.
Neutral safety The engine is prevented from starting when the shift lever is not in neutral.

10
SPECIFICATIONS
OFF-HIGHWAY TRUCK
HD1500-7
AXLES
Rear axles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full-floating
Final drive type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Planetary gear
Ratios:
Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.647
Planetary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.235
TRANSMISSION
Torque converter . . . . . . . . . . . . . . . . . . 3-elements, 1-stage, 2-phase
Transmission . . . . . . . . . . . . . . . . Full-automatic, planetary-shaft type
Speed range . . . . . . . . . . . . . . . . . . . 7 speeds forward and 1 reverse
Lockup clutch. . . . . . . . . . . . . . . . . . . . . . . . . Wet, multiple-disc clutch
Forward . . . . . . . . . . . . . . . . Torque converter drive 1st and 2nd gear
with direct drive lock-up in 1st through 7th
Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Torque converter drive
Shift control. . . . . . . . . . . . . . . . Electronic shift control with automatic
clutch modulation in all gears
Maximum travel speed . . . . . . . . . . . . . . . . . . . . . . 58 km/h 36 mph
ENGINE
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SDA12V160
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water-cooled, 4-cycle
Aspiration . . . . . . . . . . . . . . . . . . . . . . . . . Turbo-charged, after-cooled
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Bore x Stroke . . . . . . . . . . . . . . . . . 159 mm x 190 mm 6.26" x 7.48"
Piston displacement . . . . . . . . . . . . . . . . . . . . . . . . . . 45 ltr 2,746 in3
Horsepower
SAE J1995 . . . . . . . . . . . . . . . . . . . . . . . Gross 1109 kW 1,487 HP
ISO 9249 / SAE J1349 . . . . . . . . . . . . . . . Net 1048 kW 1,406 HP
Rated rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,900 rpm
Fan drive type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical
Maximum torque . . . . . . . . . . . . . . . . . . . . . . . . 697 kg•m 5,041 lb ft
Fuel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Direct injection
Governor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electronic control
Lubrication system
Method . . . . . . . . . . . . . . . . . . . . . . . . Gear pump, force-lubrication
Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full-flow type
Air cleaner . . . . . . . . . . . . . . . . . . Dry type with double elements and
pre-cleaned, with dust indicator
MAIN FRAME
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-sectioned structure
Integral front bumper
STEERING SYSTEM
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fully hydraulic power steering
with two double-acting cylinders,
Supplementary steering . . . . . . . . . . . . . . . . . . . . . . Accumulator assist
Minimum turning radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.2 m 40'
Steering angle (left or right) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41°
BRAKES
Brakes meet ISO 3450 standard.
Service brakes:
Front . . . . . . . . . . Fully hydraulic control, oil-cooled multiple-disc type
Rear . . . . . . . . . . Fully hydraulic control, oil-cooled multiple-disc type
Parking brake . . . .Spring applied, oil-released, 3 caliper dry disc mounted
on input yoke to differential
Retarder . . . Oil-cooled, multiple-disc front and rear brakes act as retarder.
Secondary brake. . . . . . . . . . . . . . . . . . Manual - push button operated.
Automatically applied prior to hydraulic system
pressure dropping below established level.
Braking surface. . . . . . . . . . . . . . . . . . . . . . . . . . 159148 cm224,668 in2
WEIGHT (APPROXIMATE)
Empty weight . . . . . . . . . . . . . . . . . . . . . . . . . 105300 kg 232,144 lb
Max. gross vehicle weight. . . . . . . . . . . . . . . . 249478 kg 550,000 lb
Not to exceed max. gross vehicle weight, including options, fuel
and payload. Empty weight is with 100% fuel and operator.
Weight distribution:
Empty: Front axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48.6%
Rear axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51.4%
Loaded: Front axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.8%
Rear axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67.2%
BODY
Capacity:
Struck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 m371 yd3
Heaped (2:1, SAE) . . . . . . . . . . . . . . . . . . . . . . . . . . 78 m3102 yd3
Nominal payload. . . . . . . . . . . . . . 144.1 metric tons 158.9 U.S. tons
Material . . . . . . . . . . . 400 Brinell hardness high tensile strength steel
(front, sides, and bottom)
Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flat floor configuration
Material thickness:
Bottom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 mm 0.75"
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 mm 0.47"
Sides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 mm 0.35"
Target area
(inside length x width) . . . . . . . 7670 mm x 5705 mm 25'2"x 18'9"
Dumping angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45°
Height at full dump . . . . . . . . . . . . . . . . . . . . . . . . . . 11440 mm 37'6"
Heating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exhaust heating
HYDRAULIC SYSTEM
Hoist cylinder. . . . . . . . . . . . . . . . . . . . . . Two, 3-stage telescopic type
Relief pressure . . . . . . . . . . . . . . . . 19.0 MPa 193.4 kg/cm22,750 psi
Hoist time
Raise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 sec
Lower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 sec
CAB
Integral 4-post ROPS/FOPS cab structure (meets SAEJ 1040 Apr 88)
TIRES
Standard tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.00 R51
SERVICE REFILL CAPACITIES
Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2120 ltr. 560 U.S. Gal
Engine oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 ltr. 51 U.S. Gal
Hydraulic system . . . . . . . . . . . . . . . . . . . . . . . 900 ltr. 238 U.S. Gal
Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297 ltr. 78 U.S. Gal
Final drives (total) . . . . . . . . . . . . . . . . . . . . . . 240 ltr. 63.5 U.S. Gal
Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . 153 ltr. 40.5 U.S. Gal
SUSPENSION SYSTEM
Variable rate, hydropneumatic with integral rebound control.
Maximum front stroke. . . . . . . . . . . . . . . . . . . . . . . . . 375 mm 14.76"
Maximum rear stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 mm 4.17"
Rear axle oscillation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +/- 9.2°

11
DIMENSIONS AND PERFORMANCE
HD1500-7
OFF-HIGHWAY TRUCK
TRAVEL PERFORMANCE
To determine travel performance: Read from gross weight down to the percent of total resistance. From this weight-resistance point,
read horizontally to the curve with the highest obtainable speed range, then down to maximum speed. Usable rimpull depends upon
traction available and weight on drive wheels.
To determine brake performance: These curves are provided to establish the maximum speed and gearshift position for safer
descents on roads with a given distance. Read from gross weight down to the percent of total resistance. From this weight resistance
point, read horizontally to the curve with the highest obtainable speed range, then down to maximum descent speed the brakes can
safely handle without exceeding cooling capacity.
BRAKE PERFORMANCE

AESS727-00 ©2007 Komatsu America Corp. Printed in USA D08(2.5M)C 8/07 (EV-1)
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
POWERTRAIN
●Air cleaner (2); battery disconnect;
engine electronic control; engine
electronic monitor; engine overspeed
protection; engine pre-lube system;
ground level shutdown; variable speed
engine fan (electronic-over-hydraulic)
●Powertrain Management
(these items located in the cab):
–transmission controller
–retard controller
–monitor display
–data download port
●Seven-speed automatic transmission:
–electronic control
–body-up reverse interlock
–body-up shift inhibitor
–downshift/reverse shift inhibitor
–neutral start switch
–transmission belly guard
●Torque converter (electronic lockup
control)
CAB
●Air conditioning (R134A)
●Electric windows (both doors)
●Glass, tinted
●Heater/defroster
●Instrumentation (gauge and monitor):
–speedometer
–tachometer
–engine coolant temperature
–brake oil temperature
–fuel lever
–shift indicator
–hourmeter
–odometer
–torque converter temperature
–warning lights
●Insulated and sound-suppressed
●Radio, AM/FM/Cassette
●Seat, air suspension (driver)
●Seat, passenger
●Seat belts 78 mm 3" retractable
●Steering wheel, tilt and telescopic
●Sun visor
●Windshield washer and wiper
LIGHTING
●Back-up light, rear (1)
●Back-up lights, deck-mounted (2)
●Clearance lights, front
●Engine service lights (2)
●Headlights, halogen (8)
●Hi-low beam selector
●Instrument panel lights
●Ladder lights, driver side
●Retarder lights (2)
●Stop and tail lights LED
●Turn signals LED
GENERAL
●Back-up warning alarm
●Body up cable
●Cab guard (on canopy)
●Drive line protector (front and rear)
●Engine fan and pulley guards
●Exhaust pipe blanket
●Ground level engine shutdown
●Handrails
●Heat shield behind engine
●Horn, electric (2)
●Ladder, deck-to-transmission
●Ladders, right and left (front)
●Mirrors, right and left
●Mud flaps
●Parking brake (3 caliper, spring-applied)
●Reverse hoist interlock
●Rock ejectors
●ROPS cab (integral 4-post)
●Secondary brake system,
automatic and manual
●Skid-resistant walkway on deck
●Supplementary steering system,
automatic
●Windshield, laminated safety glass
OTHER
●Auto-Retard Speed Control (ARSC)
●Automatic Spin Regulator (ASR)
●Automatic lubrication system
●Body mounting group
●Fast fill fuel system (Wiggins) right-hand
side of the machine
●Integrated Komatsu Payload Meter
●Operation, parts, and maintenance
manuals (1 set)
●Rims (6), 24 x 51
(for 33 x 51 and 33R51 tires)
●Tow hooks, front
●Tow pin, rear
●Vehicle health monitoring system
(VHMS)
(Optional equipment may change operating weight.)
Weights listed are approximate change from operating weight.
Hub odometer, miles or kilometers . . . . . . . . . . . . . . . . 2 kg 5 lb
Disabled truck quick connects . . . . . . . . . . . . . . . . . 13.5 kg 29.8 lb
Kim Hot Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 kg 35 lb
Fast fill fuel, Wiggins left-hand side . . . . . . . . . . . . . . . 2 kg 5 lb
Fast oil change, Wiggins (engine) . . . . . . . . . . . . . . . . . 7 kg 15 lb
Service center, Wiggins left-hand side . . . . . . . . . . . . 36 kg 80 lb
Muffler, deck-mounted . . . . . . . . . . . . . . . . . . . . . . . . 50 kg 110 lb
Fire extinguisher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 kg 30 lb
Body liners
–19 mm 0.75" floor, 9 mm 0.35" side, front and
rear half of canopy (400 Brinell Steel) . . . . . . . 8320 kg 18,340 lb
www.KomatsuAmerica.com Komatsu America Corp. is an authorized licensee of Komatsu Ltd.
Materials and specifications are subject to change without notice
is a registered trademark of Komatsu Ltd., Japan