Kompernass KH 25 User manual

JUICE EXTRACTOR
Operating instructions
6JUICE EXTRACTOR
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM
www.kompernass.com
ID-Nr.: KH25-07/08-V1
KH 25
CV_KH25_E23697_LB6.qxd 02.07.2008 11:21 Uhr Seite 1

q
y
r
e
w
t
i
o
u
a
s
CV_KH25_E23697_LB6.qxd 02.07.2008 11:21 Uhr Seite 4

- 1 -
CONTENT PAGE
Intended use 2
Technical Data 2
Items supplied 2
Important safety instructions 2
Appliance description 3
Set-up and assembly of the appliance 3
Juice extraction 4
Emptying 4
Disassembly 4
Cleaning and Care 5
Storage 5
Disposal 5
Warranty & Service 6
Importer 6
Read these operating instructions carefully before using the appliance for the first time and preserve this
maual for later reference. Pass this manual on to whoever might acquire the appliance at a future date.
IB_KH25_E23697_LB6 02.07.2008 11:23 Uhr Seite 1

- 2 -
JUICE EXTRACTOR
KH 25
Intended use
The appliance is intended for the extraction of juices
from citrus fruits such as oranges and lemons. Only
foodstuffs may be processed with the appliance. All
other usages or modifications are regarded as con-
trary to the operating instructions and contain a
great risk of accidents. The manufacturer accepts no
liability for damage(s) resulting from usage that is
contrary to these instructions. Not for commercial
use.
Technical Data
Mains voltage: 220-240 V~50 Hz
Rated output: 25 W
Items supplied
Citrus Press
Large squeezing cone
Small squeezing cone
Fruit pulp sieve (2 parts)
Operating instructions
Important safety instructions
To avoid potentially fatal electric
shocks:
• The rating of the local power supply must tally
completely with the details given on the rating
plate of the appliance.
• Arrange for defective power plugs and/or ca-
bles to be replaced at once by qualified technici-
ans or our Customer Service Department.
• Arrange for damaged or malfunctioning
appliances to be inspected and/or repaired
by a qualified specialist or the Customer
Service Department as soon as possible.
• Do not expose the appliance to rain and never
use it in a humid or wet environment. Ensure that
the power cable never becomes moist or wet
during operation.
To avoid the risks of fire and burn
injuries:
• This appliance is not intended for use by persons
(including children) with reduced physical, sen-
sorial or mental cabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their
safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• Provide for a safe and slip-free positioning of the
appliance.
• Ensure that the power plug is easily accessible in
the event of danger, and that there is no danger
of anyone tripping over the power cable.
IB_KH25_E23697_LB6 02.07.2008 11:23 Uhr Seite 2

- 3 -
Using the appliance safely:
• In the event of danger, immediately remove the
power plug from the wall socket.
• Never use the appliance for purposes other than
those for which it was designed.
• Remove the power plug from the wall socket
when the appliance is not in use, when you re-
move parts and before cleaning the appliance.
• Do not use the appliance outdoors.
Appliance description
qLid
wLarge squeezing cone
eSmall squeezing cone
rUpper fruit pulp sieve
tFruit pulp regulator
yLower fruit pulp sieve
uJuice collector
iDrive axle
oPower cable with power plug
aAppliance plinth
sPower cable storage
Set-up and assembly of the
appliance
Important:
Ensure that the power plug is not in the power
socket before assembling the appliance. Otherwise
there is a risk that the appliance could start
unintentionally.
1. Unwind the power cable ocompletely from the
cable storage sand secure it in the lateral
recess on the appliance plinth a.
2. Place the appliance plinth aon a level and
slipfree surface.
Note:
Rinse all removable components thoroughly before
the first usage of the appliance (see chapter
"Cleaning and care").
3. Place the juice collector uon the drive axle i
of the appliance plinth aand turn it clockwise
as far as it will go.
4. Place both parts of the fruit pulp sieve r/y
into each other so that the fruit pulp regulator t
protrudes through the recess. Both parts must
audibly engage.
5. Place the assembled fruit pulp sieve r/yon
the juice collector u. The fruit pulp regulator t
must lie on the grip and catch in the rabbet on
the grip.
6. Press the small squeezing cone e on the drive
axle iso that it engages.
Note:
If you want to press oranges or other larger fruits,
place the large squeezing cone wover the small
squeezing cone e. Ensure that the lobes of the
small squeezing cone eengage in the recesses of
the large squeezing cone w.
7. Insert the power plug into a wall power socket.
The appliance is now ready for use.
IB_KH25_E23697_LB6 02.07.2008 11:23 Uhr Seite 3

- 4 -
Juice extraction
1. Adjust the fruit pulp regulator t, by sliding it, so
that the slits in the fruit pulp sieve r/ylie
exactly above each other if you wish to have fru-
it juice with fruit pulp. Adjust the fruit pulp regula-
tor t, by sliding it, so that the slits in the fruit
pulp sieve r/yare not lying above each other
if you do not wish to have fruit juice with fruit
pulp.
2. Cut the fruits in half (orange, lemon etc.)
3. Press the halved fruit lightly onto the squeezing
cone w/e. The appliance switches itself on
automatically as soon as the squeezing cone
w/eis pressed down.
4. Apply pressure at various parts of the fruit rind
with your fingers. Thereby the juice will be even-
ly squeezed out of the fruit.
5. When no more juice flows from the fruit, stop
applying pressure to the squeezing cone w/e.
The appliance stops.
6. Press the squeezing cone w/edown repeated-
ly to loosen it, until it turns in the opposite
direction.
7. When no more juice flows from the fruit, stop
applying pressure to the squeezing cone w/e.
The appliance stops. Remove the fruit skin from
the squeezing cone w/e.
8. Continue similarly with further fruit-halves until
you have squeezed out the desired volume of
fruit juice. The current volume squeezed can be
read off from the scale on the side of the juice
collector u.
Note:
When pressing out juice, do not exceed the 600 ml
volume marking on the scale of the juice collector
u.
Emptying
Important:
Remove the power plug from the wall socket when
you empty the fruit pulp sieve or the juice collector
u. Otherwise there is a risk that the appliance
could start unintentionally.
• Turn the juice collector uanti-clock-wise until the
perceptible resistance desists. You can now lift it
from the drive axle iand pour the juice out.
Disassembly
If you wish to disassemble the Citrus Press, e.g. for
the cleaning of it, proceed as follows:
1. Remove the power plug from the wall socket o.
2. Remove the squeezing cone w/e.
3. Remove the fruit pulp sieve r/y.
Press the hook on the underside of the upper fruit
pulp sieve rinwards. At the same time exert light
pressure on the fruit pulp sieve t. The components
allow themselves to be pressed apart.
4. Turn the juice collector uanti-clock-wise until
the perceptible resistance desists. You can now
lift it from the drive axle a.
IB_KH25_E23697_LB6 02.07.2008 11:23 Uhr Seite 4

- 5 -
Cleaning and Care
Important:
Always remove the power plug from the wall socket
before cleaning the appliance. There is a risk of
receiving an electric shock!
Important:
To avoid receiving an electrical shock, NEVER
submerse the appliance plinth ain water or other
fluids.
• Disassemble the Citrus Press as described in the
chapter "Disassembly".
• Clean the appliance plinth aonly with a slightly
moistened cloth.
• Clean all other removable parts in a warm mild-
detergent solution and dry them carefully.
• To clean the fruit pulp sieve r/y, take it apart
and clean it with a dishwashing brush under
running water.
Note:
Do not use aggressive detergents to clean the
appliance. These substances can attack the upper
surfaces.
The appliance and its components may not be
cleaned in a dishwasher or in boiling water.
Storage
If you do not intend to use the appliance for an
extended period, wrap the power cable oaround
the power cable storage s, directing the end of the
cable through the lateral recess on the appliance
plinth a. Assemble the appliance completely and
close the lid. Store the appliance at a clean and dry
location.
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally responsible manner.
IB_KH25_E23697_LB6 02.07.2008 11:23 Uhr Seite 5

- 6 -
Warranty & Service
The warranty for this appliance is for 3 years from
the date of purchase. This appliance has been
manufactured with care and meticulously examined
before delivery. Please retain your receipt as proof
of purchase date. Should a claim need to be made
under the warranty, please make contact by tele-
phone with our service department. Only in this
way can a post-free despatch for your goods be
assured.
The warranty covers ONLY claims for material and
maufacturing defects, not for wearing or consuma-
ble or for damage to fragile components. This pro-
duct is for private use only and is not intended for
commercial applications.
The warranty will become void in the event of abusi-
ve and improper handling, use of force and internal
tampering not carried or approved by our authori-
zed service branch. Your statutory rights are not
restricted in any way by this warranty.
DES Ltd
Units 14-15
Bilston Industrial Estate
Oxford Street
Bilston
WV14 7EG
Tel.: [phone]
Fax: [phone]
e-mail: [e-mail]
Irish Connection
Harbour view
Howth
Co. Dublin
Tel: 00353 (0) 87 99 62 077
Fax: [phone]
e-mail: [e-mail]
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
www.kompernass.com
IB_KH25_E23697_LB6 02.07.2008 11:23 Uhr Seite 6