Konica Minolta bizhub C450 Installation and maintenance instructions

C450
Network Scanner Operations

C450 x-1
Introduction
Thank you for choosing this machine.
This user’s guide contains details on the operation of the network connection
and scanner functions of the bizhub C450, precautions on its use, and basic
troubleshooting procedures. In order to ensure that this machine is used cor-
rectly and efficiently, carefully read this user’s guide before using the ma-
chine. After reading the manual, store it in the designated holder so that it
can easily be referred to when questions or problems arise during operation.
The illustrations used in this manual may appear slightly different from views
of the actual equipment.
Energy Star®
As an ENERGY STAR®Partner, we have determined that this machine meets
the ENERGY STAR®Guidelines for energy efficiency.
What is an ENERGY STAR®Product?
An ENERGY STAR®product has a special feature that allows it to automat-
ically switch to a “low-power mode” after a period of inactivity. An ENERGY
STAR®product uses energy more efficiently, saves you money on utility bills
and helps protect the environment.

x-2 C450
Trademarks and Registered Trademarks
KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of imaging
are registered trademarks or trademarks of KONICA MINOLTA HOLDINGS,
INC.
PageScope and bizhub are registered trademarks or trademarks of KONICA
MINOLTA BUSINESS TECHNOLOGIES, INC.
Netscape Communications, the Netscape Communications logo, Netscape
Navigator, Netscape Communicator, and Netscape are trademarks of Net-
scape Communications Corporation.
PageScope Box Operator:
This software is based in part on the work of the Independent JPEG Group.
Compact-VJE
Copyright 1986-2003 VACS Corp.
RC4®is a registered trademark or trademark of RSA Security Inc. in the Unit-
ed States and/or other countries.
RSA®is a registered trademark or trademark of RSA Security Inc. in the Unit-
ed States and/or other countries.
OpenSSL Statement
OpenSSL License
Copyright ©1998-2000 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modifica-
tion, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright no-
tice, this list of conditions and the following disclaimer in the documen-
tation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgment:
“This product includes software developed by the OpenSSL Project for
use in the OpenSSL Toolkit. (http://www.openssl.org/)”
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used
to endorse or promote products derived from this software without prior
written permission. For written permission, please contact openssl-
[email protected].
5. Products derived from this software may not be called “OpenSSL” nor
may “OpenSSL” appear in their names without prior written permission
of the OpenSSL Project.

C450 x-3
6. Redistributions of any form whatsoever must retain the following ac-
knowledgment:
“This product includes software developed by the OpenSSL Project for
use in the OpenSSL Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND
ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIM-
ITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CON-
SEQENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCURE-
MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young
([e-mail]). This product includes software written by Tim Hud-
son ([e-mail]).
Original SSLeay License
Copyright ©1995-1998 Eric Young ([e-mail]) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@crypt-
soft.com).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the fol-
lowing conditions are aheared to. The following conditions apply to all code
found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just
the SSL code.
The SSL documentation included with this distribution is covered by the
same copyright terms except that the holder is Tim Hudson (tjh@crypt-
soft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in the
code are not to be removed. If this package is used in a product, Eric Young
should be given attribution as the author of the parts of the library used. This
can be in the form of a textual message at program startup or in documen-
tation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modifica-
tion, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list
of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright no-
tice, this list of conditions and the following disclaimer in the documen-
tation and/or other materials provided with the distribution.

x-4 C450
3. All advertising materials mentioning features or use of this software must
display the following acknowledgement:
“This product includes cryptographic software written by Eric Young
([email protected])”
The word ‘cryptographic’ can be left out if the rouines from the library be-
ing used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from
the apps directory (application code) you must include an acknowledge-
ment:
“This product includes software written by Tin Hudson (tjh@crypt-
soft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EX-
PRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AU-
THOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCI-
DENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILI-
TY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The licence and distribution terms for any publically available version or de-
rivative of this code cannot be changed. i.e. this code cannot simply be cop-
ied and put under another distribution licence [including the GNU Public
Licence.]
All other product names mentioned are trademarks or registered trademarks
of their respective companies

C450 x-5
Contents
Introduction
Energy Star® .........................................................................................1
What is an ENERGY STAR® Product? ..............................................1
Trademarks and Registered Trademarks ..........................................2
Contents ................................................................................................5
About this manual ...............................................................................13
Structure of the manual ...................................................................13
Notation ............................................................................................13
Explanation of manual conventions ..................................................14
Safety advices ..................................................................................14
Sequence of action ..........................................................................14
Tips ..................................................................................................15
Special text markings .......................................................................15
User’s guides ......................................................................................16
User’s guide [Copy operations] .......................................................16
User’s guide [Network scanner operations] <this manual> .............16
User’s guide [Box operations] ..........................................................16
User’s guide [Enlarge display operations] ........................................16
User’s guide [Facsimile operations] .................................................16
User’s guide [Print operations] .........................................................16
Quick guide [Print operations] ..........................................................17
CD-ROM configuration ......................................................................18
1 Before using the scan functions
1.1 Environment required for using the scan functions ...................... 1-3
1.2 Available scanning functions ........................................................... 1-4
Sending the scanned data in an e-mail message .......................... 1-4
Sending the scanned data as files (FTP) ........................................ 1-5
Sending the scanned data to a computer on the network (SMB) .. 1-6
Saving the scanned data in boxes ................................................. 1-7
Using the machine as a scanner .................................................... 1-8

x-6 C450
1.3 Settings for using network/scanning functions .............................1-9
Specifying network settings ............................................................1-9
Registering destinations and specifying their settings ...................1-9
Setting the From address .............................................................1-10
Specifying the scan settings .........................................................1-11
Specifying program settings .........................................................1-11
Specifying default scan settings ...................................................1-11
1.4 Connecting to the network .............................................................1-12
Network connection ......................................................................1-12
1.5 Flow chart of setup and scanning operations ..............................1-13
2 Scanning documents
2.1 Control panel .....................................................................................2-3
2.2 Displaying the scan screen ..............................................................2-6
2.3 Sending data in an e-mail message (scan to e-mail) .....................2-8
Scan to e-mail .................................................................................2-8
Using programs ..............................................................................2-8
Selecting group addresses ...........................................................2-11
Selecting destinations from the address book .............................2-14
Searching the destination .............................................................2-16
To search the destination .............................................................2-17
Entering the addresses directly ....................................................2-18
2.4 Sending data to a server (scan to FTP) .........................................2-21
Scan to FTP ..................................................................................2-21
Using programs ............................................................................2-21
Selecting group addresses ...........................................................2-24
Selecting destinations from the address book .............................2-27
Entering the addresses directly ....................................................2-30
2.5 Sending data to a PC on the network (scan to SMB) ...................2-34
Scan to SMB .................................................................................2-34
Using programs ............................................................................2-34
Selecting Group Addresses ..........................................................2-37
Selecting destinations from the address book .............................2-40
Entering the addresses directly ....................................................2-43
2.6 Specifying the scan settings ..........................................................2-46
Available settings ..........................................................................2-46
File type ........................................................................................2-48
To specify the file type settings ....................................................2-49
Resolution .....................................................................................2-51
Simplex/Duplex .............................................................................2-52
To specify the Simplex/Duplex setting .........................................2-52
Original type ..................................................................................2-53

C450 x-7
To specify the original type setting .............................................. 2-53
Scan size ...................................................................................... 2-55
To specify the scan size setting ................................................... 2-55
Color ............................................................................................. 2-58
To specify the color setting .......................................................... 2-59
Background removal .................................................................... 2-60
Original setting ............................................................................. 2-61
To specify the original settings .................................................... 2-62
Book scanning (Application) ........................................................ 2-64
To use the “Book Scan” function ................................................. 2-65
Frame erase (Application) ............................................................ 2-67
Separate scan .............................................................................. 2-69
2.7 Checking the settings .................................................................... 2-70
Checking the settings .................................................................. 2-70
To check a job .............................................................................. 2-70
Deleting unneeded destinations .................................................. 2-75
Specifying e-mail settings ............................................................ 2-77
To change the e-mail settings ...................................................... 2-78
2.8 Checking the scanner transmission log ....................................... 2-79
Displaying the current jobs list ..................................................... 2-79
Displaying the job history list ....................................................... 2-80
Displayed information .................................................................. 2-81
3 Specifying settings from the control panel
3.1 Settings on the control panel .......................................................... 3-2
Utility types .................................................................................... 3-2
Other related settings ..................................................................... 3-3
3.2 Displaying setup screens ................................................................. 3-4
To display the scan screen ............................................................ 3-4
To display the user setting screen ................................................. 3-6
To display the administrator setting screen ................................... 3-7
3.3 Registering abbreviated destinations ............................................. 3-9
E-mail destinations ......................................................................... 3-9
FTP destinations .......................................................................... 3-13
SMB destinations ......................................................................... 3-17
Box destinations .......................................................................... 3-21
3.4 Registering group destinations ..................................................... 3-23
To register a group destination .................................................... 3-23
3.5 Registering program destinations ................................................ 3-25
To register a program destination ................................................ 3-25

x-8 C450
3.6 Specifying e-mail settings ..............................................................3-28
Subject ..........................................................................................3-28
Text ...............................................................................................3-30
3.7 Setting the main scan mode screen ..............................................3-32
Default tab ....................................................................................3-32
Program default ............................................................................3-33
3.8 Setting the save format of the data to be scanned ......................3-35
JPEG compression level ...............................................................3-35
To specify the compression level .................................................3-35
Black compression level ...............................................................3-37
To specify the compression level .................................................3-37
TWAIN lock time ...........................................................................3-39
3.9 TCP/IP settings ................................................................................3-41
Before specifying the settings ......................................................3-41
Items to be specified ....................................................................3-41
To specify TCP/IP settings ...........................................................3-43
IP filtering ......................................................................................3-45
RAW port no. ................................................................................3-47
3.10 NetWare settings .............................................................................3-48
NetWare parameters .....................................................................3-48
To specify NetWare settings .........................................................3-50
Status ............................................................................................3-52
3.11 IPP settings ......................................................................................3-53
IPP parameters .............................................................................3-53
To specify IPP settings .................................................................3-53
Support operation .........................................................................3-54
Printer information ........................................................................3-55
3.12 FTP settings .....................................................................................3-59
FTP parameters ............................................................................3-59
To specify FTP settings ................................................................3-60
3.13 SMB settings ....................................................................................3-62
SMB parameters ...........................................................................3-62
To specify SMB settings ...............................................................3-63
3.14 AppleTalk settings ...........................................................................3-65
AppleTalk parameters ...................................................................3-65
To specify AppleTalk settings .......................................................3-65
3.15 Enabling LDAP settings ..................................................................3-67
Enabling LDAP parameters ...........................................................3-67
To specify enabling LDAP settings ...............................................3-67
Initial setting for search details .....................................................3-69

C450 x-9
3.16 Setting up LDAP settings ............................................................... 3-71
LDAP server registration parameters ........................................... 3-71
To specify setting up LDAP settings ............................................ 3-73
General settings ........................................................................... 3-76
To specify the authentication method ......................................... 3-76
3.17 E-mail TX (SMTP) settings ............................................................. 3-77
E-mail TX (SMTP) parameters ...................................................... 3-77
To specify E-mail TX (SMTP) settings .......................................... 3-79
SMTP server address ................................................................... 3-81
SMTP authentication .................................................................... 3-83
3.18 E-mail RX (POP) settings ............................................................... 3-86
E-Mail RX (POP) parameters ........................................................ 3-86
To specify e-mail RX (POP) settings ............................................ 3-87
POP server address ..................................................................... 3-89
3.19 Device settings ............................................................................... 3-90
Device parameters ....................................................................... 3-90
To specify device settings ........................................................... 3-90
3.20 Time adjustment settings .............................................................. 3-92
Time adjustment parameters ....................................................... 3-92
To specify time adjustment settings ............................................ 3-92
NTP server address ..................................................................... 3-94
3.21 Status notification settings ............................................................ 3-96
Status notification parameters ..................................................... 3-96
To specify status notification settings ......................................... 3-96
Notification item setting ............................................................... 3-97
3.22 PING confirmation .......................................................................... 3-98
PING confirmation parameters .................................................... 3-98
To specify PING confirmation settings ........................................ 3-98
PING TX address ....................................................................... 3-100
3.23 PSWC settings .............................................................................. 3-102
To specify PSWC settings ......................................................... 3-102
3.24 SLP settings .................................................................................. 3-103
To specify SLP settings ............................................................. 3-103
3.25 LPD settings .................................................................................. 3-104
To specify LPD settings ............................................................. 3-104
3.26 SNMP settings .............................................................................. 3-105
SNMP parameters ...................................................................... 3-105
To specify SNMP settings .......................................................... 3-105
3.27 Prefix/Suffix settings .................................................................... 3-107
Prefix/Suffix parameters ............................................................ 3-107

x-10 C450
To specify the prefix/suffix settings ............................................3-107
Prefix/Suffix setting .....................................................................3-109
3.28 IS OpenAPI settings ......................................................................3-111
Access setting ............................................................................3-111
Port no. .......................................................................................3-112
SSL .............................................................................................3-113
Authentication .............................................................................3-114
4 Specifying settings using PageScope Web Connection
4.1 Items that can be specified using PageScope Web Connection ..4-2
User mode ......................................................................................4-2
Administrator mode ........................................................................4-3
4.2 Using PageScope Web Connection .................................................4-4
Operating environment ...................................................................4-4
Accessing PageScope Web Connection ........................................4-4
Page structure ................................................................................4-5
Logging on to administrator mode .................................................4-7
Web browser cache ........................................................................4-9
For Internet Explorer .......................................................................4-9
For Netscape ..................................................................................4-9
4.3 Scan registration (user mode) ........................................................4-10
Registering new destinations ........................................................4-10
To register new destinations .........................................................4-13
Group destination .........................................................................4-14
Program registration .....................................................................4-17
To register new destinations .........................................................4-24
Temporary registration ..................................................................4-26
Subject registration .......................................................................4-28
Body registration ...........................................................................4-30
4.4 Administrator mode ........................................................................4-32
Basic operation .............................................................................4-32
4.5 Network TWAIN (System tab) .........................................................4-33
Setting the operation lock time for TWAIN ...................................4-33
4.6 Scan tab (Administrator mode) ......................................................4-34
Prefix/Suffix ...................................................................................4-34
Import/Export ................................................................................4-36
Importing .......................................................................................4-36
Exporting .......................................................................................4-36
Other .............................................................................................4-37

C450 x-11
4.7 Network tab (Administrator mode) ............................................... 4-38
TCP/IP .......................................................................................... 4-38
IP address filtering ....................................................................... 4-40
NetWare ....................................................................................... 4-41
NetWare Status ............................................................................ 4-42
IPP ................................................................................................ 4-43
FTP — Client ................................................................................ 4-44
FTP — Server ............................................................................... 4-45
SNMP ........................................................................................... 4-46
SMB — Scan ................................................................................ 4-47
SMB — Print ................................................................................ 4-48
Apple Talk .................................................................................... 4-49
LDAP ............................................................................................ 4-50
E-mail — E-mail receive ............................................................... 4-52
E-mail — E-mail transmission ...................................................... 4-53
SSL/TLS ....................................................................................... 4-55
SSL/TLS setting ........................................................................... 4-57
To create a certificate .................................................................. 4-58
SSL/TLS setting — Install a certificate ........................................ 4-60
Authentication — User authentication ......................................... 4-61
Authentication — Auto logout ...................................................... 4-62
IS OpenAPI ................................................................................... 4-63
5 Importing images using TWAIN
5.1 Features and operating environment ............................................. 5-2
Features ......................................................................................... 5-2
Operating environment .................................................................. 5-2
5.2 Installing the TWAIN driver .............................................................. 5-3
To install the software .................................................................... 5-3
5.3 Importing images .............................................................................. 5-4
To import images ........................................................................... 5-4
Scanning using the PUSH scan function ....................................... 5-7
Scanning using the prescan function ............................................. 5-8
General rule .................................................................................... 5-8
When user authentication settings have been applied ................ 5-10
When account track settings have been applied ......................... 5-11
Settings in the main window ........................................................ 5-12
Parameters on the settings tab .................................................... 5-14
Parameters on the image tab ....................................................... 5-16
Parameters on the area tab ......................................................... 5-17
5.4 Selecting the scanning device ....................................................... 5-18
To select a device ........................................................................ 5-18

x-12 C450
5.5 Registering a new scanning device ...............................................5-22
Registering a device .....................................................................5-22
Verifying the authentication information .......................................5-25
6 Scan function troubleshooting
6.1 Troubleshooting ................................................................................6-2
6.2 Network error list ..............................................................................6-3
7 Appendix
7.1 Product specifications ......................................................................7-2
Scanning functions .........................................................................7-2
Network function .............................................................................7-3
7.2 Entering text .......................................................................................7-5
To type text .....................................................................................7-8
List of available characters .............................................................7-8
7.3 Glossary ..............................................................................................7-9
7.4 Index .................................................................................................7-15

C450 x-13
About this manual
This user’s guide covers the bizhub C450 network and scanning functions.
This section introduces the structure of the manual and notations used for
product names, etc.
This manual is intended for users who understand the basic operations of
computers and the machine. For operating procedures of the Windows or
Macintosh operating system and application programs, refer to the respec-
tive manuals.
Structure of the manual
This manual consists of the following chapters.
Chapter 1 Before using the scan functions
Chapter 2 Scanning documents
Chapter 3 Specifying settings from the control panel
Chapter 4 Specifying settings using PageScope Web Connection
Chapter 5 Importing images using TWAIN
Chapter 6 Scan function troubleshooting
Chapter 7 Appendix
Lists the product specifications and the characters that can be entered from
the control panel.
Notation
Product name Notation in the manual
bizhub C450 This machine, C450
Internal Network Controller Network Controller
Microsoft Windows 98 Windows 98
Microsoft Windows Me Windows Me
Microsoft Windows NT 4.0 Windows NT 4.0
Microsoft Windows 2000 Windows 2000
Microsoft Windows XP Windows XP
When the operating systems above are written
together
Windows 95/98/Me
Windows NT 4.0/2000/XP
Windows 95/98/Me/NT 4.0/2000/XP

x-14 C450
Explanation of manual conventions
The marks and text formats used in this manual are described below.
Safety advices
6 DANGER
Failure to observe instructions highlighted in this manner may result in
fatal or critical injuries in fact of electrical power.
%Observe all dangers in order to prevent injuries.
7 WARNING
Failure to observe instructions highlighted in this manner may result in
serious injuries or property damage.
%Observe all warnings in order to prevent injuries and to ensure safe use
of the machine.
7 CAUTION
Failure to observe instructions highlighted in this manner may result in
slight injuries or property damage.
%Observe all cautions in order to prevent injuries and to ensure safe use
of the machine.
Sequence of action
1The number 1 as formatted here indi-
cates the first step of a sequence of
actions.
2Subsequent numbers as formatted
here indicate subsequent steps of a
sequence of actions.
?Text formatted in this style pro-
vides additional assistance.
%Text formatted in this style describes the action that will ensure the
desired results are achieved.
An illustration inserted
here shows what operations
must be performed.

C450 x-15
Tips
2
Note
Text highlighted in this manner contains useful information and tips to en-
sure safe use of the machine.
2
Reminder
Text highlighted in this manner contains information that should be re-
minded.
!
Detail
Text highlighted in this manner contains references for more detailed in-
formation.
Special text markings
[Stop] key
The names of keys on the control panel are written as shown above.
MACHINE SETTING
Display texts are written as shown above.

x-16 C450
User’s guides
The following user’s guides have been prepared for this machine.
User’s guide [Copy operations]
This manual contains details on basic operations and the operating proce-
dures for the various copy functions.
-Refer to this user’s guide for details on operating procedures for copy
functions, including precautions on installation/use, turning the machine
on/off, loading paper, and troubleshooting operations such as clearing
paper misfeeds.
User’s guide [Network scanner operations] <this manual>
This manual contains details on specifying network settings for standard
equipment and on operations for scanning functions.
-Refer to this user’s guide for details on operating procedures for network
functions and for using scan to e-mail, scan to FTP and scan to PC
(SMB).
User’s guide [Box operations]
This manual contains details on operating procedures for using the boxes.
-Refer to this user’s guide for details on operating procedures for using
the boxes on the hard disk.
User’s guide [Enlarge display operations]
This manual contains details on operating procedures for using copy func-
tions in enlarge display mode.
-Refer to this user’s guide for details on operating procedures in enlarge
display mode.
User’s guide [Facsimile operations]
This manual contains details on operating procedures for faxing/Internet fax-
ing.
-Refer to this user’s guide for details on operating procedures for fax func-
tions when the fax kit is installed.
User’s guide [Print operations]
This manual contains details on operating procedures using the standard
built-in printer controller.
-For details on the printing functions, refer to user’s guide (PDF file) on
User Software CD-ROM.

C450 x-17
Quick guide [Print operations]
This manual contains details on operating procedures using the standard
built-in printer controller.
-Refer to this quick guide for basic operating procedures for the printing
functions.

x-18 C450
CD-ROM configuration
The CD-ROMs consist of the following:
-User Software CD-ROM
-PostScript Printer Driver CD-ROM (Win/Mac)
-PageScope CD (PageScope Software)
Each CD-ROM contains printer drivers (for Windows and for Macintosh) and
utilities as well as screen fonts and documentation, such as the user’s guides
and release notes.
The configuration of the printer drivers on the CD-ROM is shown below.
Browse through the CD-ROMs for the desired folders and files.
-The folder and file names may not be listed below starting from the root
directory.
-Use all of the files in the EN (English) folder.