Konica Minolta bizhub 652 User manual

Copy Operations
User’s Guide
User’s Guide
*XXXXXXXX00*
*XXXXXXXX00*
Konica Minolta
Business Solutions Europe GmbH
Europaallee 17
30855 Langenhagen • Germany
Tel.: [phone]
Fax: [phone]
www.konicaminolta.eu
© 2009 Konica Minolta
Business Solutions Europe GmbH
All rights reserved. Printed in Germany.

.

bizhub 652/552 Contents-1
Table of contents
1 Introduction
1.1 Welcome .......................................................................................................................................... 1-3
1.1.1 User's guides ..................................................................................................................................... 1-3
1.1.2 User's Guide ...................................................................................................................................... 1-4
1.2 Conventions used in this manual .................................................................................................. 1-5
1.2.1 Symbols used in this manual ............................................................................................................. 1-5
To use this machine safely................................................................................................................. 1-5
Procedural instruction........................................................................................................................ 1-5
Key symbols....................................................................................................................................... 1-6
1.2.2 Original and paper indications ........................................................................................................... 1-6
Original and paper sizes .................................................................................................................... 1-6
Original and paper indications ........................................................................................................... 1-6
2 Part names and their functions
2.1 Option configuration....................................................................................................................... 2-3
2.2 Main Body ........................................................................................................................................ 2-6
2.2.1 Outside of the main body (front) ........................................................................................................ 2-6
2.2.2 Outside of the main body (rear) ......................................................................................................... 2-8
2.2.3 Main body Inside................................................................................................................................ 2-9
2.2.4 Control Panel ................................................................................................................................... 2-10
Adjusting the angle of the Control Panel ......................................................................................... 2-11
2.2.5 Touch Panel ..................................................................................................................................... 2-12
2.3 Option............................................................................................................................................. 2-14
2.3.1 Finisher FS-526/Saddle Stitcher SD-508/Punch Kit PK-516........................................................... 2-14
2.3.2 Job Separator JS-602...................................................................................................................... 2-16
2.3.3 Z Folding Unit ZU-606 ..................................................................................................................... 2-17
2.3.4 Post Inserter PI-505 ......................................................................................................................... 2-18
2.3.5 Finisher FS-527/Saddle Stitcher SD-509/Punch Kit PK-517/Job Separator JS-603 ...................... 2-19
2.3.6 Large Capacity Unit LU-301/LU-204 ............................................................................................... 2-22
3 Using this machine
3.1 Turning on or off the machine ....................................................................................................... 3-3
3.2 Basic copy operations .................................................................................................................... 3-5
3.2.1 Placing originals................................................................................................................................. 3-5
Loading the original into the ADF ...................................................................................................... 3-5
Placing the original on the Original Glass .......................................................................................... 3-6
3.2.2 Basic copy operations ....................................................................................................................... 3-6
3.2.3 Copy operations using multiple functions ......................................................................................... 3-7
Functions that cannot be combined .................................................................................................. 3-9
4 Control Panel Keys
Control Panel and functions .............................................................................................................. 4-3
4.1 About Start, Stop, and Interrupt .................................................................................................... 4-5
Start ................................................................................................................................................... 4-5
Stop.................................................................................................................................................... 4-5
Interrupt.............................................................................................................................................. 4-5
Reset.................................................................................................................................................. 4-5

Contents-2 bizhub 652/552
4.2 About Copy, Fax/Scan, and User Box........................................................................................... 4-6
Copy................................................................................................................................................... 4-6
Fax/Scan............................................................................................................................................ 4-6
User Box ............................................................................................................................................ 4-6
4.3 Utility/Counter ................................................................................................................................. 4-7
4.4 Mode Memory ................................................................................................................................. 4-8
4.5 Access.............................................................................................................................................. 4-9
Controlling access to the machine by user/account (user authentication/account track)................. 4-9
Using the machine during non-scheduled hours............................................................................. 4-11
4.6 Power Save.................................................................................................................................... 4-12
4.7 Accessibility................................................................................................................................... 4-13
4.8 Enlarge Display ............................................................................................................................. 4-15
4.9 Guidance........................................................................................................................................ 4-16
4.10 C (Clear) ......................................................................................................................................... 4-17
4.11 Proof Copy..................................................................................................................................... 4-18
Printing one set to check the copy result (Proof Copy) ................................................................... 4-18
Using a preview image to check the copy result (Advanced Preview) ............................................ 4-19
5 Copy Function
5.1 [Basic] .............................................................................................................................................. 5-4
5.1.1 [Density/Background] ........................................................................................................................ 5-5
5.1.2 [Paper]................................................................................................................................................ 5-6
Configuring a custom size ................................................................................................................. 5-7
Configuring wide paper...................................................................................................................... 5-7
5.1.3 [Zoom]................................................................................................................................................ 5-8
5.1.4 [Duplex/Combine] .............................................................................................................................. 5-9
5.1.5 [Finishing] ......................................................................................................................................... 5-12
5.1.6 Post Inserter..................................................................................................................................... 5-14
Keys on control panel ...................................................................................................................... 5-14
Finishing using Post Inserter............................................................................................................ 5-15
5.1.7 [Separate Scan]................................................................................................................................ 5-16
5.1.8 [Auto Rotate OFF] ............................................................................................................................ 5-17
5.2 [Original Setting] ........................................................................................................................... 5-18
Copying mixed originals .................................................................................................................. 5-19
Copying Z-folded originals............................................................................................................... 5-20
5.3 [Original Type] ............................................................................................................................... 5-20
5.4 [Application] .................................................................................................................................. 5-22
5.4.1 [Sheet/Cover/Chapter Insert] ........................................................................................................... 5-23
[OHP Interleave] ............................................................................................................................... 5-23
[Cover Sheet] ................................................................................................................................... 5-24
[Insert Sheet] .................................................................................................................................... 5-25
[Insert Image] ................................................................................................................................... 5-27
[Chapters]......................................................................................................................................... 5-28
[Program Jobs]................................................................................................................................. 5-29
5.4.2 [Edit Image] ...................................................................................................................................... 5-31
[Neg./Pos. Reverse] ......................................................................................................................... 5-31
[Mirror Image]................................................................................................................................... 5-32
[Image Adjustment] .......................................................................................................................... 5-33
5.4.3 [Book Copy/Repeat]......................................................................................................................... 5-34
[Book Copy] ..................................................................................................................................... 5-34
[Image Repeat]................................................................................................................................. 5-35
[Booklet Original].............................................................................................................................. 5-36
5.4.4 [Page Margin]................................................................................................................................... 5-37
5.4.5 [Image Adjust] .................................................................................................................................. 5-39
5.4.6 [Booklet] ........................................................................................................................................... 5-39
5.4.7 [Erase] .............................................................................................................................................. 5-41
[Frame Erase] ................................................................................................................................... 5-41
[Non-Image Area Erase]................................................................................................................... 5-41

bizhub 652/552 Contents-3
5.4.8 [Stamp/Composition] ....................................................................................................................... 5-43
[Date/Time]....................................................................................................................................... 5-43
[Page Number] ................................................................................................................................. 5-44
[Stamp]............................................................................................................................................. 5-46
[Copy Protect] .................................................................................................................................. 5-47
[Copy Guard].................................................................................................................................... 5-48
[Password Copy].............................................................................................................................. 5-49
[Stamp Repeat] ................................................................................................................................ 5-50
[Header/Footer] ................................................................................................................................ 5-52
[Watermark]...................................................................................................................................... 5-53
[Overlay] ........................................................................................................................................... 5-54
[Registered Overlay]......................................................................................................................... 5-55
5.4.9 [Card Shot]....................................................................................................................................... 5-57
5.4.10 [Save in User Box]............................................................................................................................ 5-58
5.5 Left panel display .......................................................................................................................... 5-59
5.5.1 [Job List]........................................................................................................................................... 5-60
5.5.2 [Check Job]...................................................................................................................................... 5-62
6 [User Settings]
6.1 [System Settings] ............................................................................................................................ 6-4
6.2 [Custom Display Settings].............................................................................................................. 6-7
6.3 [Copier Settings] ............................................................................................................................. 6-9
6.4 [Scan/Fax Settings]....................................................................................................................... 6-11
6.5 [Printer Settings] ........................................................................................................................... 6-11
6.6 [Change Password] ...................................................................................................................... 6-12
6.7 [Change E-Mail Address] ............................................................................................................. 6-12
6.8 [Change Icon] ................................................................................................................................ 6-13
6.9 [Register Authentication Information] ........................................................................................ 6-14
6.10 [Cellular Phone/PDA Setting]....................................................................................................... 6-15
7 [Administrator Settings]
7.1 [System Settings] ............................................................................................................................ 7-4
7.1.1 [Power Save Settings]........................................................................................................................ 7-4
7.1.2 [Output Settings] ................................................................................................................................ 7-5
7.1.3 [Date/Time Settings]........................................................................................................................... 7-6
7.1.4 [Daylight Saving Time] ....................................................................................................................... 7-6
7.1.5 [Weekly Timer Settings] ..................................................................................................................... 7-7
7.1.6 [Restrict User Access]........................................................................................................................ 7-8
7.1.7 [Expert Adjustment]............................................................................................................................ 7-9
[Leading Edge Adjustment].............................................................................................................. 7-13
[Centering]........................................................................................................................................ 7-13
[Media Adjustment] .......................................................................................................................... 7-14
[Center Staple Position] ................................................................................................................... 7-14
[Half-Fold Position] .......................................................................................................................... 7-15
[Tri-Fold Position Adjustment] ......................................................................................................... 7-15
[Punch Vertical Position Adjustment]............................................................................................... 7-16
[Punch Horizontal Position Adjustment] .......................................................................................... 7-16
[Punch Regist Loop Size Adjustment] ............................................................................................. 7-17
[Punch Edge Sensor Adjustment] .................................................................................................... 7-17
[Vertical Punch (Z-Fold) Position Adjustment] ................................................................................. 7-17
[Horizontal Punch (Z-Fold) Position Adjustment]............................................................................. 7-18
[1st Z-Fold Position Adjustment] ..................................................................................................... 7-18
[2nd Z-Fold Position Adjustment] .................................................................................................... 7-19
[Punch Unit Size Detect Sensor]...................................................................................................... 7-19
[Gradation Adjustment] .................................................................................................................... 7-20
7.1.8 [List/Counter] ................................................................................................................................... 7-21
7.1.9 [Reset Settings]................................................................................................................................ 7-22
7.1.10 [User Box Settings] .......................................................................................................................... 7-23

Contents-4 bizhub 652/552
7.1.11 [Standard Size Setting] .................................................................................................................... 7-23
7.1.12 [Stamp Settings]............................................................................................................................... 7-24
7.1.13 [Blank Page Print Settings] .............................................................................................................. 7-25
7.1.14 [Skip Job Operation Settings].......................................................................................................... 7-25
7.1.15 [Default Bypass Paper Type Setting] ............................................................................................... 7-26
7.1.16 [Page Number Print Position]........................................................................................................... 7-26
7.1.17 [Advanced Preview Setting] ............................................................................................................. 7-27
7.2 [Administrator/Machine Settings] ............................................................................................... 7-28
7.3 [One-Touch/User Box Registration]............................................................................................ 7-28
7.4 [User Authentication/Account Track] ......................................................................................... 7-29
7.4.1 [General Settings]............................................................................................................................. 7-29
7.4.2 [User Authentication Settings] ......................................................................................................... 7-31
7.4.3 [Account Track Settings].................................................................................................................. 7-34
7.4.4 [Print without Authentication]........................................................................................................... 7-35
7.4.5 [Print Counter List] ........................................................................................................................... 7-36
7.4.6 [External Server Settings]................................................................................................................. 7-36
7.4.7 [Limiting Access to Destinations]..................................................................................................... 7-37
7.4.8 [Authentication Device Settings] ...................................................................................................... 7-37
7.4.9 [User/Account Common Setting]..................................................................................................... 7-38
7.4.10 [Scan to Home Settings] .................................................................................................................. 7-38
7.4.11 [Scan to Authorized Folder Settings] ............................................................................................... 7-38
7.5 [Network Settings] ........................................................................................................................ 7-39
7.6 [Copier Settings] ........................................................................................................................... 7-39
7.7 [Printer Settings] ........................................................................................................................... 7-40
7.8 [Fax Settings]................................................................................................................................. 7-40
7.9 [System Connection] .................................................................................................................... 7-41
7.10 [Security Settings]......................................................................................................................... 7-43
7.10.1 [Administrator Password]................................................................................................................. 7-43
7.10.2 [User Box Administrator Setting] ..................................................................................................... 7-43
7.10.3 [Administrator Security Levels] ........................................................................................................ 7-44
7.10.4 [Security Details] .............................................................................................................................. 7-45
7.10.5 [Enhanced Security Mode]............................................................................................................... 7-47
Required settings............................................................................................................................. 7-47
Settings to forcibly changed............................................................................................................ 7-48
7.10.6 [HDD Settings] ................................................................................................................................. 7-49
7.10.7 [Function Management Settings] ..................................................................................................... 7-49
7.10.8 [Stamp Settings]............................................................................................................................... 7-50
7.10.9 [Driver Password Encryption Setting] .............................................................................................. 7-50
7.11 [License Settings] ......................................................................................................................... 7-51
7.12 [OpenAPI Authentication Management Setting]........................................................................ 7-51
8 Maintenance
8.1 Paper ................................................................................................................................................ 8-3
8.1.1 Checking the paper............................................................................................................................ 8-3
Replenishment message.................................................................................................................... 8-3
Precautions regarding the use of paper ............................................................................................ 8-3
Paper storage..................................................................................................................................... 8-3
8.1.2 Loading paper.................................................................................................................................... 8-4
Loading paper into Tray 1 and Tray 2................................................................................................ 8-4
Loading paper into Tray 3 and Tray 4................................................................................................ 8-5
Loading paper into the Bypass Tray.................................................................................................. 8-5
Loading paper into the LCT ............................................................................................................... 8-7

bizhub 652/552 Contents-5
8.2 Consumables................................................................................................................................... 8-8
8.2.1 Checking consumables...................................................................................................................... 8-8
Replacement message ...................................................................................................................... 8-8
Checking consumables status......................................................................................................... 8-10
Viewing counters.............................................................................................................................. 8-10
Checking the total number of pages printed ................................................................................... 8-12
8.3 Cleaning procedure ...................................................................................................................... 8-12
Slit Scan Glass................................................................................................................................. 8-12
Original Glass, Control Panel, Paper Take-Up Roller ...................................................................... 8-13
Housing, Original Pad ...................................................................................................................... 8-13
9 Troubleshooting
9.1 When a problem is detected (Call a service representative) ...................................................... 9-3
Problems that cannot be corrected by the user ................................................................................ 9-3
9.2 Troubleshooting table..................................................................................................................... 9-4
Simple troubleshooting ...................................................................................................................... 9-4
Main messages and their remedies ................................................................................................... 9-8
Icons that appear in the touch-panel screen ................................................................................... 9-10
9.3 If print quality is deteriorated....................................................................................................... 9-11
Cleaning the Print Head ................................................................................................................... 9-11
10 Authentication unit (Biometric type)
10.1 Using an authentication unit (biometric type) ............................................................................ 10-3
10.1.1 Configuring this machine ................................................................................................................. 10-4
10.1.2 Registering a user ............................................................................................................................ 10-6
Registering a user using the Control Panel of this machine ............................................................ 10-6
Registering a user using Data Administrator ................................................................................... 10-7
Checking the version of the installed Data Administrator................................................................ 10-8
Setup................................................................................................................................................ 10-8
User registration............................................................................................................................. 10-12
10.1.3 Logging in to this machine............................................................................................................. 10-18
When [1-to-many authentication] has been specified ................................................................... 10-18
When [1-to-1 authentication] has been specified .......................................................................... 10-19
11 Authentication unit (IC card type)
11.1 Using authentication unit (IC card type) ..................................................................................... 11-3
11.1.1 Configuring this machine ................................................................................................................. 11-3
11.1.2 Registering a user ............................................................................................................................ 11-5
Registering a user using the Control Panel of this machine ............................................................ 11-5
Registering a user using Data Administrator ................................................................................... 11-7
Checking the version of the installed Data Administrator................................................................ 11-7
Setup................................................................................................................................................ 11-8
User registration............................................................................................................................. 11-12
11.1.3 Logging in to this machine............................................................................................................. 11-16
When [Card Authentication] is enabled.......................................................................................... 11-16
When [Card Authentication + Password] is enabled ..................................................................... 11-17

Contents-6 bizhub 652/552
12 Specifications
12.1 Paper .............................................................................................................................................. 12-3
Paper types and paper capacities ................................................................................................... 12-3
12.2 Machine specifications................................................................................................................. 12-5
bizhub 652/552 ................................................................................................................................ 12-5
Automatic Duplex Unit ..................................................................................................................... 12-7
Reverse Automatic Document Feeder............................................................................................. 12-8
12.3 Options........................................................................................................................................... 12-9
Large Capacity Unit LU-301 ............................................................................................................ 12-9
Large Capacity Unit LU-204 ............................................................................................................ 12-9
Finisher FS-526................................................................................................................................ 12-9
Saddle Stitcher SD-508 ................................................................................................................. 12-11
Punch Kit PK-516 .......................................................................................................................... 12-12
Job Separator JS-602.................................................................................................................... 12-12
Z-Folding Unit ZU-606 ................................................................................................................... 12-13
Post Inserter PI-505 ....................................................................................................................... 12-13
Finisher FS-527.............................................................................................................................. 12-14
Saddle Stitcher SD-509 ................................................................................................................. 12-15
Punch Kit PK-517 .......................................................................................................................... 12-16
Job Separator JS-603.................................................................................................................... 12-16
Authentication Unit (Biometric Type) AU-101 ................................................................................ 12-16
Authentication Unit (Biometric Type) AU-102 ................................................................................ 12-17
Authentication Unit (IC card type) AU-201..................................................................................... 12-18
13 Appendix
13.1 Glossary ......................................................................................................................................... 13-3
14 Index
14.1 Index by item ................................................................................................................................. 14-3
14.2 Index by button.............................................................................................................................. 14-7

1Introduction

bizhub 652/552 1-3
1.1 Welcome 1
1 Introduction
1.1 Welcome
Thank you for purchasing this machine.
This User's Guide describes the functions, operating instructions, precautions for correct operation, and sim-
ple troubleshooting guidelines of this machine. In order to obtain maximum performance from this product
and use it effectively, please read this User's Guide as necessary.
1.1.1 User's guides
User's guide Overview
[Quick Guide Copy/Print/Fax/Scan/Box Opera-
tions]
This manual describes operating procedures and the
functions that are most frequently used in order to en-
able you to begin using this machine immediately.
This manual also contains notes and precautions that
should be followed to ensure safe usage of this ma-
chine and describes details on trademarks and copy-
rights.
Please be sure to read this manual before using this
machine.
[User's Guide Copy Operations] This manual describes details on copy mode opera-
tions and the settings of this machine.
• Specifications of originals and copy paper
• Copy function
• Maintaining this machine
• Troubleshooting
[User's Guide Enlarge Display Operations] This manual describes details on operating proce-
dures of the enlarge display mode.
• Copy function
• Scanning function
• G3 fax function
• Network fax function
[User's Guide Print Operations] This manual describes details on printer functions.
• Printer function
• Setting the printer driver
[User's Guide Box Operations] This manual describes details on the boxed functions
using the hard disk.
• Saving data in user boxes
• Retrieving data from user boxes
• Transferring and printing data from user boxes
[User's Guide Network Scan/Fax/Network Fax
Operations]
This manual describes details on transmitting
scanned data.
• E-mail TX, FTP TX, SMB TX, Save in User Box,
WebDAV TX, Web Services
• G3 fax
• IP Address Fax, Internet Fax
[User's Guide Fax Driver Operations] This manual describes details on the fax driver func-
tion that transmits faxes directly from a computer.
•PC-FAX
[User's Guide Network Administrator] This manual describes details on setting methods for
each function using the network connection.
• Network settings
• Settings using PageScope Web Connection

Welcome
1
1-4 bizhub 652/552
1.1
1.1.2 User's Guide
This User's Guide is intended for users ranging from those using this machine for the first time to administra-
tors.
It describes basic operations, functions that enable more convenient operations, maintenance procedures,
simple troubleshooting operations, and various setting methods of this machine.
Note that basic technical knowledge about the product is required to enable users to perform maintenance
work or troubleshooting operations. Limit your maintenance and troubleshooting operations to the areas ex-
plained in this manual.
Should you experience any problems, please contact your service representative.
[User's Guide Advanced Function Operations] This manual describes details on functions that be-
come available by registering the optional license kit
and by connecting to an application.
• Web browser function
•Imagepanel
• PDF Processing Function
• Searchable PDF
• My panel and My address functions
User's guide Overview

bizhub 652/552 1-5
1.2 Conventions used in this manual 1
1.2 Conventions used in this manual
1.2.1 Symbols used in this manual
Symbols are used in this manual to express various types of information.
The following describes each symbol related to correct and safe usage of this machine.
To use this machine safely
7 WARNING
-This symbol indicates that a failure to heed the instructions may lead to death or serious injury.
7 CAUTION
-This symbol indicates that negligence of the instructions may lead to mishandling that may cause injury
or property damage.
NOTICE
This symbol indicates a risk that may result in damage to this machine or documents.
Follow the instructions to avoid property damage.
Procedural instruction
0This check mark indicates an option that is required in order to use conditions or functions that are pre-
requisite for a procedure.
1This format number "1" represents the first step.
2This format number represents the order of serial steps.
%This symbol indicates a supplementary explanation of a pro-
cedural instruction.
%This symbol indicates transition of the control panel to access a desired menu item.
This symbol indicates a desired page.
The operation procedures are
described using illustrations.

Conventions used in this manual
1
1-6 bizhub 652/552
1.2
dReference
This symbol indicates a reference.
View the reference as required.
Key symbols
[ ]
Key names on the touch panel or computer screen, or a name of user's guide are indicated by these brackets.
Bold text
This presents a key name, part name, product name or option name on the control panel.
1.2.2 Original and paper indications
Original and paper sizes
The following explains the indication for originals and paper described
in this manual.
When indicating the original or paper size, the Y side represents the
width and the X side the length.
Original and paper indications
windicates the paper size with the length (X) being longer than the
width (Y).
vindicates the paper size with the length (X) being shorter than the
width (Y).

2Part names and their
functions

bizhub 652/552 2-3
2.1 Option configuration 2
2 Part names and their functions
2.1 Option configuration
No. Name Description
1 Main unit The original is scanned by the scanner section, and the
scanned image is printed by the printer section.
The main unit is hereinafter referred to as "this ma-
chine", "main unit", or bizhub 652/552 through the
manual.
2Authentication Unit (biometric type)
AU-101
Performs user authentication by scanning vein pat-
terns in the finger.
Working Table WT-506 is required to install the Au-
thentication Unit.
3Authentication Unit (biometric type)
AU-102
4Authentication Unit (IC card type)
AU-201
Performs user authentication by scanning information
recorded on the IC card.
Working Table WT-506 is required to install the Au-
thentication Unit.
5Working Table WT-506 Provides an area to temporarily place an original or
other materials. This is also used when the authentica-
tion unit is installed.
6Keyboard Holder KH-101 Install this holder to use a compact keyboard.
For details on compact keyboards, contact your serv-
ice representative.
7Output Tray OT-503 Collects printed pages.
8Mount Kit MK-715 Used for banner printing.

Option configuration
2
2-4 bizhub 652/552
2.1
9 Large Capacity Unit LU-301 Can be loaded with up to 3,000 sheets of 8-1/2 e11-
size (A4-size) paper.
Referred to as the LCT throughout the manual.
10 Large Capacity Unit LU-204 Can be loaded with up to 2,500 sheets of 12 e18-size
(A3-size) paper.
To change the paper size, contact your service repre-
sentative.
Referred to as the LCT throughout the manual.
11 Saddle Stitcher SD-509 Install this unit onto the Finisher to allow Fold/Bind.
Referred to as the Saddle Stitcher throughout the
manual.
12 Finisher FS-527 Sorts, groups and staples printed paper before feeding
out.
13 Punch Kit PK-517 Install this unit onto the Finisher to enable punching
holes.
14 Job Separator JS-603 Install this unit onto the Finisher.
Collects printed pages.
15 Z Folding Unit ZU-606 Install this unit onto the Finisher to enable Z folding or
punching holes.
16 Saddle Stitcher SD-508 Install this unit onto the Finisher to allow Fold/Bind.
Referred to as the Saddle Stitcher throughout the
manual.
17 Finisher FS-526 Sorts, groups and staples printed paper before feeding
out.
18 Punch Kit PK-516 Install this unit onto the Finisher to enable punching
holes.
19 Post Inserter PI-505 Install this unit onto the Finisher to enable insertion of
a cover sheet into copied sheets. This unit also allows
you to manually operate the finisher (only the lower tray
is available).
20 Job Separator JS-602 Install this unit onto the Finisher.
Collects printed pages.
No illustration is provided as the options are built into the main body.
21 Fax Kit FK-502 Allows this machine to function as a fax machine. Al-
ternatively, it allows more telephone lines to be con-
nected.
22 Stamp Unit SP-501 Applies a stamp to originals that have been scanned.
23 Spare TX Marker Stamp 2 A replacement stamp for the Stamp Unit.
24 Mount Kit MK-720 Required when installing the Fax Kit FK-502.
25 Local Interface Kit EK-604 Install this holder to use a compact keyboard. For de-
tails on compact keyboards, contact your service rep-
resentative.
26 Local Interface Kit EK-605 Install this kit when using the connection function with
a compact keyboard or Bluetooth-compatible cellular
phone or PDA. A receiving device for Bluetooth com-
munication is built in to this kit.
27 Security Kit SC-507 Enables the copy guard or password copy function.
This kit is used to prevent unauthorized copying.
28 Scan Accelerator Kit SA-502 Creates images at high speed when sending scans.
29 i-Option LK-101 v2 Enables a Web browser and the Image Panel function
to be used on the control panel.
30 i-Option LK-102 Enables PDF document encryption with a digital ID, at-
taching of a digital signature, and property settings
when distributing a PDF document using the scan or
User Box function.
No. Name Description

bizhub 652/552 2-5
2.1 Option configuration 2
31 i-Option LK-103 v2 Provides both i-Option LK-101 v2 and i-Option
LK-102.
32 i-Option LK-105 Provides the searchable PDF function.
33 Upgrade Kit UK-203 Required when using Web browser, image panel, PDF
processing, searchable PDF, My panel, or My address
function.
If necessary, you can increase the number of languag-
es, which can be displayed in the Control Panel of this
machine, up to nine.
34 Dehumidifier Heater HT-508 Installed in the unit to prevent humidity from collecting
in the paper.
• This option may not be available depending on the
sales area.
No. Name Description

Main Body
2
2-6 bizhub 652/552
2.2
2.2 Main Body
2.2.1 Outside of the main body (front)
No. Name
1Control Panel
2Left-Side Cover Release Lever
3Left-Side Cover
4Lateral Guide
5ADF
6Original Tray
7Original Output Tray
8Sub Power Switch
9USB Port (Type A) USB2.0/1.1
10 USB Port (Type A) USB2.0/1.1 (For compact keyboard)
11 Automatic Duplex Unit Lock Release Lever
12 Automatic Duplex Unit