Konica Minolta bizhub C451 User manual

User’s Guide [Copy Operations]

Introduction
C451 x-1
Introduction
Thank you for choosing this machine.
This manual contains details on the operation of the various functions of the
machine, precautions on its use, and basic troubleshooting procedures. In
order to ensure that this machine is used correctly and efficiently, carefully
read this manual as needed.
In order to operate the product safely and properly, be sure to read the ac-
companying User’s Guide [Copy/Print/Fax/Scan/Box Operations].
The illustrations used in this manual may appear slightly different from views
of the actual equipment.
OpenSSL Statement
OpenSSL License
Copyright ©1998-2000 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modifica-
tion, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright no-
tice, this list of conditions and the following disclaimer in the documen-
tation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgment:
“This product includes software developed by the OpenSSL Project for
use in the OpenSSL Toolkit. (http://www.openssl.org/)”
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used
to endorse or promote products derived from this software without prior
written permission. For written permission, please contact openssl-
[email protected].
5. Products derived from this software may not be called “OpenSSL” nor
may “OpenSSL” appear in their names without prior written permission
of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following ac-
knowledgment:
“This product includes software developed by the OpenSSL Project for
use in the OpenSSL Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND
ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIM-

Introduction
C451 x-2
ITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CON-
SEQENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCURE-
MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young
([email protected]). This product includes software written by Tim Hud-
son ([email protected]).
Original SSLeay License
Copyright ©1995-1998 Eric Young ([email protected]) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@crypt-
soft.com).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the fol-
lowing conditions are aheared to. The following conditions apply to all code
found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just
the SSL code.
The SSL documentation included with this distribution is covered by the
same copyright terms except that the holder is Tim Hudson (tjh@crypt-
soft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in the
code are not to be removed. If this package is used in a product, Eric Young
should be given attribution as the author of the parts of the library used. This
can be in the form of a textual message at program startup or in documen-
tation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modifica-
tion, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list
of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright no-
tice, this list of conditions and the following disclaimer in the documen-
tation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgement:
“This product includes cryptographic software written by Eric Young
([email protected])”
The word ‘cryptographic’ can be left out if the rouines from the library be-
ing used are not cryptographic related.

Introduction
C451 x-3
4. If you include any Windows specific code (or a derivative thereof) from
the apps directory (application code) you must include an acknowledge-
ment:
“This product includes software written by Tin Hudson (tjh@crypt-
soft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EX-
PRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AU-
THOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCI-
DENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILI-
TY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The licence and distribution terms for any publically available version or de-
rivative of this code cannot be changed. i.e. this code cannot simply be cop-
ied and put under another distribution licence [including the GNU Public
Licence.]
All other product names mentioned are trademarks or registered trademarks
of their respective companies

Introduction
C451 x-4
Contents
Introduction
Contents ............................................................................................. x-4
Available features ............................................................................ x-16
Selecting the print color ............................................................... x-16
Automatically selecting the paper ................................................ x-16
Adjusting copies to the size of the paper ..................................... x-16
Specifying separate horizontal and vertical zoom ratios .............. x-16
Scanning the original in separate batches ................................... x-16
Center binding and folding in half and in three ............................ x-17
Sorting copies .............................................................................. x-17
Stapling copies ............................................................................. x-17
Punching holes in copies .............................................................. x-18
Copying multiple original pages onto a single page .................... x-18
Copying an original containing various page sizes ...................... x-18
Adjusting copies according to the image quality of the original
....................................................................................................... x-18
Inserting paper between copies of OHP ...................................... x-19
Adding a cover page .................................................................... x-19
Inserting different paper into copies ............................................. x-19
Inserting pages from a different original at specified locations
in a copy ....................................................................................... x-20
Printing double-sided copies with the specified page on the
front side ....................................................................................... x-20
Copying with reversed colors ....................................................... x-20
Printing a mirror image ................................................................. x-21
Copying with a background color ................................................ x-21
Improving the copy color quality .................................................. x-21
Separately copying a page spread ............................................... x-21
Repeating copy images ................................................................ x-22
Printing the enlarged image on multiple pages ............................ x-22
Creating booklets from copies of pamphlets ............................... x-22
Making copies for filing ................................................................ x-23
Adjusting the image to fit the paper size ...................................... x-23
Copying with the page layout of a magazine ............................... x-23
Erasing sections of copies ........................................................... x-24
Printing a sample copy ................................................................. x-24
Printing date/time or page number on copies .............................. x-24
Managing jobs .............................................................................. x-24
Programming copy settings ......................................................... x-24
Checking the copy settings .......................................................... x-25
Enlarging the size of text in touch panel screens ......................... x-25
Displaying explanations of functions and settings ....................... x-25
Interrupting a copy job ................................................................. x-25

Introduction
C451 x-5
Explanation of manual conventions .............................................. x-26
Descriptions of original documents and paper ............................x-28
User’s Guides .................................................................................. x-29
Printed manuals ............................................................................ x-29
User’s Guide CD manuals ............................................................ x-29
1 Before making copies
1.1 Part names and their functions ........................................................1-2
Options ........................................................................................... 1-2
Outside of machine ........................................................................1-5
Inside of machine ......................................................................... 1-11
Finisher FS-517/Punch kit PK-512 ............................................... 1-13
Finisher FS-608/Punch kit PK-512 ............................................... 1-15
Finisher FS-519/Output tray OT-602/Punch kit PK-510 .............. 1-18
Saddle stitcher SD-505/Mailbin kit MT-502 .................................1-20
Job separator JS-504 ................................................................... 1-22
Large capacity unit LU-301 .......................................................... 1-23
Control panel ................................................................................ 1-25
Basic settings screens .................................................................. 1-28
Icons that appear in the screen ....................................................1-31
1.2 Adjusting the angle of the control panel .......................................1-32
To adjust the angle of the control panel .......................................1-32
1.3 Turning on the main power and the auxiliary power ...................1-36
Turning on the machine ................................................................ 1-36
Scanning during warm-up ............................................................ 1-38
Turning off the machine ................................................................ 1-39
Automatically clearing settings (automatic panel reset) ...............1-41
Automatically cancelling the mode screen
(System Auto Reset) ..................................................................... 1-41
Automatically conserving energy (Low Power mode) ..................1-41
Automatically conserving energy (Sleep mode) ...........................1-42
Manually conserving energy .........................................................1-43
Automatically turning the machine on/off (Weekly Timer) ............1-44
Controlling each user’s use of this machine
(User Authentication) .................................................................... 1-47
Controlling each account’s use of this machine
(Account Track) ............................................................................ 1-51
Controlling use of this machine with authentication unit
(biometric type) ............................................................................. 1-54
When “1-to-many authentication” has been specified .................1-55
When “1-to-1 authentication” has been specified ....................... 1-56
Controlling use of this machine with the authentication unit
(IC card type) ................................................................................ 1-58
When “Card Authentication” has been specified ......................... 1-58

Introduction
C451 x-6
When “Card Authentication + Password” has been specified ..... 1-60
1.4 Loading paper into tray 1 and tray 2 .............................................1-62
1.5 Loading paper into tray 3 ...............................................................1-65
1.6 Loading paper into tray 4 ...............................................................1-67
1.7 Loading paper into the LCT ...........................................................1-69
1.8 Loading paper into the bypass tray ...............................................1-71
2 Basic copy operations
2.1 General copy operation ....................................................................2-2
2.2 Operations that cannot be combined .............................................2-5
Operations where the setting specified last is given priority ..........2-5
Operations where the setting specified first is given priority ......... 2-7
2.3 Feeding the document ......................................................................2-8
Loading the document into the ADF .............................................. 2-8
Placing the document on the original glass ................................. 2-11
Scanning the document in separate batches
(“Separate Scan” setting) ............................................................. 2-13
Scanning a multi-page document from the original glass ............ 2-17
2.4 Specifying document settings .......................................................2-23
Specifying the document size (Original Size settings) .................. 2-23
Copying documents of mixed sizes (“Mixed Original” setting) .... 2-25
Loading folded (Z-folded) documents .......................................... 2-27
Selecting the document orientation
(Original Direction settings) .......................................................... 2-29
To select an Original Direction setting ..........................................2-30
Selecting the position of the binding margin
(Binding Position settings) ............................................................ 2-32
To select a Binding Position setting .............................................2-34
Reducing the effects of dust on the left partition glass ................2-35
Changing scan settings for each document ................................. 2-36
2.5 Selecting a Color setting ................................................................2-41
To select a Color setting ...............................................................2-42
2.6 Selecting a Paper Setting ...............................................................2-44
Automatically selecting the paper size (“Auto” Paper setting) ..... 2-45
Manually selecting the desired paper size ................................... 2-46
2.7 Specifying a Zoom setting ..............................................................2-47
Automatically selecting the zoom ratio (“Auto” Zoom Setting) ....2-47
Specifying the zoom ratio of the document
(“Full Size” setting) ....................................................................... 2-48
Typing in the zoom ratio (XY Zoom setting) .................................2-49
Slightly reducing the copy (“Minimal” setting) .............................. 2-51

Introduction
C451 x-7
Selecting a preset zoom ratio (Enlarge and Reduce settings) ...... 2-52
Typing in separate X and Y zoom ratios
(Individual Zoom settings) ............................................................ 2-53
Selecting a stored zoom ratio ....................................................... 2-55
Storing the desired zoom ratio .....................................................2-56
2.8 Selecting an Original > Copy setting .............................................2-59
Selecting single-sided copies ....................................................... 2-60
Selecting double-sided copies ..................................................... 2-62
2.9 Selecting a combined copy setting ...............................................2-65
Copying multiple document pages onto a single page
(combined copy settings) ............................................................. 2-67
2.10 Selecting the quality of the document ..........................................2-69
Loading documents with small print or photos
(Original Type settings) ................................................................. 2-69
To select an Original Type setting ................................................2-70
2.11 Selecting the Density settings .......................................................2-73
Adjusting the print density (Density settings) ...............................2-73
Adjusting the background density
(Background Removal settings) ...................................................2-75
Adjusting the reproduction quality of text .................................... 2-76
Printing with a glossy finish (“Glossy” setting) ............................. 2-78
2.12 Selecting Finishing settings ...........................................................2-79
Separating copies by sets (“Sort” setting) .................................... 2-83
Separating copies by pages (“Group” Setting) ............................2-84
Selecting the output tray ..............................................................2-85
Stapling copies (Staple settings) .................................................. 2-87
Punching holes in copies (Punch settings) ................................... 2-92
2.13 Selecting a folding setting ..............................................................2-96
Folding copies in half (“Half-Fold” setting) ................................... 2-97
Binding copies at the center (“Center Staple & Fold” setting) ... 2-100
To fold copies in three (“Tri-Fold” setting) ..................................2-104
2.14 Selecting not to rotate the image ................................................2-106
2.15 Scanning the next document to be copied while a copy job is
being printed (next job reservation) ............................................2-107
2.16 Temporarily stopping scanning/printing .....................................2-109
2.17 Deleting a paused job ...................................................................2-110
3 Additional copy operations
3.1 Checking the Copy Settings (Check Job) .......................................3-2
To check the settings .....................................................................3-2
To change the settings ...................................................................3-5

Introduction
C451 x-8
3.2 Printing a proof to check the settings (Proof Copy) ......................3-6
3.3 Interrupting a copy job (Interrupt mode) .........................................3-9
3.4 Registering copy programs (Mode Memory) ................................3-11
Deleting a copy program ..............................................................3-14
3.5 Copying with programmed copy settings (Mode Memory) .........3-16
3.6 Displaying function descriptions (Help) ........................................3-19
Overview of Help screens ............................................................. 3-19
Displaying main Help screens ......................................................3-23
3.7 Specifying control panel settings (Accessibility mode) ...............3-25
Displaying the Accessibility Setting screen ..................................3-25
Setting the “Touch Panel Adjustment” function ...........................3-25
Setting the Key Repeat Start/Interval Time functions .................. 3-27
Setting the “System Auto Reset Confirmation” function .............. 3-29
Setting the “Auto Reset Confirmation” function ........................... 3-32
Setting the “Enlarge Display Mode Confirmation” function ......... 3-34
Setting the “Message Display Time” function ..............................3-36
Setting the “Sound Setting” functions .........................................3-38
4 Troubleshooting
4.1 When an error code appears ...........................................................4-2
4.2 When the message “Misfeed detected.” appears .........................4-5
Location of paper misfeed ..............................................................4-5
Paper misfeed indications .............................................................. 4-6
Clearing a paper misfeed in the ADF (feed section) .......................4-8
Clearing a paper misfeed in the ADF (transport section) ..............4-13
Clearing a paper misfeed in the ADF (scanning section) .............. 4-18
Clearing a paper misfeed in the ADF (output section) .................. 4-23
Clearing a paper misfeed in the ADF (turnover section) ............... 4-26
Clearing a paper misfeed in the fusing unit .................................. 4-29
Clearing a paper misfeed in the main unit .................................... 4-34
Clearing a paper misfeed in the automatic duplex unit ................ 4-39
Clearing a paper misfeed in the bypass tray ................................4-41
Clearing a paper misfeed in the paper transport section .............4-43
Clearing a paper misfeed in tray 1 ................................................4-46
Clearing a paper misfeed in tray 2 ................................................4-47
Clearing a paper misfeed in tray 3 ................................................4-49
Clearing a paper misfeed in tray 4 ................................................4-51
Clearing a paper misfeed in the tray 3/4 horizontal transport
unit ................................................................................................ 4-53
Clearing a paper misfeed in the LCT ............................................4-55
Clearing a banner paper misfeed ................................................. 4-58
Clearing a paper misfeed in Finisher FS-517 ...............................4-64
Clearing a paper misfeed in Finisher FS-608 ...............................4-71

Introduction
C451 x-9
To clear a paper misfeed in Finisher FS-519 ................................4-80
To clear a paper misfeed in the mailbin ....................................... 4-85
To clear a paper misfeed in the saddle stitcher ...........................4-88
To clear a paper misfeed in the separator ....................................4-90
4.3 When the message “Unable to staple.” appears .........................4-92
Clearing jammed staples in Finisher FS-517 ................................4-92
Clearing jammed staples in Finisher FS-608 ................................4-97
Clearing jammed staples in Finisher FS-519 .............................. 4-102
Clearing jammed staples in the saddle stitcher .........................4-104
4.4 When the message “Replenish paper.” appears .......................4-107
4.5 When the message “... due to insufficient memory.”
appears ..........................................................................................4-108
4.6 When the message “Please replace following unit(s).”
appears ..........................................................................................4-109
4.7 When the message “XXXX needs to be replaced.” appears ..... 4-111
4.8 When the message “Now remote operating. Please do not
turn off the power.” appears ........................................................4-112
4.9 Simple troubleshooting ................................................................4-113
4.10 Main messages and their remedies ............................................4-117
5 Specifications
5.1 Specifications ....................................................................................5-2
Main unit ......................................................................................... 5-2
Automatic duplex unit ..................................................................... 5-4
Automatic document feeder ........................................................... 5-5
Large capacity unit LU-301 ............................................................ 5-6
Finisher FS-517 .............................................................................. 5-6
Finisher FS-608 .............................................................................. 5-7
Punch kit PK-512 ............................................................................ 5-9
Finisher FS-519 ............................................................................ 5-10
Punch kit PK-510 ..........................................................................5-11
Saddle stitcher SD-505 ................................................................ 5-11
Output tray OT-602 ......................................................................5-11
Mailbin kit MT-502 ........................................................................5-12
Job separator JS-504 ................................................................... 5-12
6 Copy paper/original documents
6.1 Copy paper ........................................................................................6-2
Possible paper sizes .......................................................................6-2
Paper types and paper capacities ..................................................6-4
Special paper .................................................................................. 6-5
Precautions for paper .....................................................................6-7