Konica Minolta bizhub PRO C6501/C6501P Installation manual

bizhub PRO C6501
Additional Information
This guide provides the information about corrections to be made in the three
user’s guides of bizhub PRO C6501 (Copier, POD Administrator’s Reference,
and Security), as well as the information about Stream Punch GP-501 option
newly provided to the main body.
Please refer to this guide for the operation and safety information, and keep
it inside the user’s guide of copier so that it is readily available for reference.

Contents
1 Errata for bizhub PRO C6501 User’s Guides
1.1 User’s Guide - Copier, POD Administrator’s Reference: Auto Low
Power and Auto Shut-Off .....................................................................1
1.2 User’s Guide - Security: Version Number of the Image Control
Software ................................................................................................2
2 Stream Punch
2.1 Precautions for Installation and Use ..................................................3
2.1.1 Caution Notations and Labels ............................................................3
2.1.2 Space Requirements ..........................................................................5
2.2 Machine Configuration .........................................................................7
2.2.1 Standard/Optional Equipment ...........................................................7
2.2.2 Stream Punch GP-501 .......................................................................8
2.3 Using Stream Punch GP-501 .............................................................10
2.3.1 Punching File Holes in Copies .........................................................11
2.3.2 Exchanging the Die Set ....................................................................14
2.4 Maintenance & Troubleshooting .......................................................17
2.4.1 Emptying Waste Basket of Stream Punch GP-501 .........................17
2.4.2 If Burrs Remain in Punch Holes Using Stream Punch GP-501 ........19
2.5 Specifications .....................................................................................21
2.5.1 Stream Punch GP-501 (Die Set DS-501 to 506) ..............................21

Errata for bizhub PRO C6501 User’s Guides 1
bizhub PRO C6501 Additional Information 1
1 Errata for bizhub PRO C6501 User’s
Guides
1.1 User’s Guide - Copier, POD Administrator’s Refer-
ence: Auto Low Power and Auto Shut-Off
“0 minute” is newly available as a setting option for Auto Shut-Off.
With “0 minute” specified, the Auto Shut-Off will function not after the ma-
chine is turned on and finishes warmup, but immediately after a printing op-
eration is completed.
The factory default to activate the Auto Low Power and Auto Shut-Off
Auto Low Power: 5 minutes (former) -> OFF (new)
Auto Shut-Off: 30 minutes (former) -> 1 minute (new)
According to these specification changes, description in the following pages
will be subject to the changes described above.
User’s Guide - Copier
User’s Guide - POD Administrator’s Reference
Page Description to be corrected
p. 1-4 Auto Low Power and Automatic Shut-Off
p. 2-38 Automatically Conserving Energy (Auto Low Power)
p. 2-39 Automatically Conserving Energy (Auto Shut-Off)
Page Description to be corrected
p. 4-13 Setting items and default of 07 Power Save Setting
p. 4-19 Setting items and default of 01 Power Save Setting
p. 5-26 Description and steps 4 and 5 of 07 Power Save Setting
p.6-6 Description of 01 Power Setting

1Errata for bizhub PRO C6501 User’s Guides
2 bizhub PRO C6501 Additional Information
1.2 User’s Guide - Security: Version Number of the Image
Control Software
The version number of the image control program (Image Control I1) de-
scribed in the title page will be modified as follows.
Page Former New
Title page Image control program (Image Con-
trol I1) version:
A03U0Y0-00I1-G00-40
A03U0Y0-00I1-G00-41
Image control program (Image
Control I1) version:
A03U0Y0-00I1-G00-40
A03U0Y0-00I1-G00-41
A03U0Y0-00I1-G00-50
A03U0Y0-00I1-G00-60

Stream Punch 2
bizhub PRO C6501 Additional Information 3
2 Stream Punch
2.1 Precautions for Installation and Use
2.1.1 Caution Notations and Labels
Safety precaution notations and labels appear on this machine at the follow-
ing positions.
Be very careful that an accident does not occur when operations such as re-
moving mishandled paper are performed.

2Stream Punch
4 bizhub PRO C6501 Additional Information
2
Reminder
Do not remove caution labels. Should any caution label or caution indi-
cator be illegible due to soilage, clean the label. If any caution label is re-
moved or cleaning does not render the label legible, please contact your
service representative.
This safety message you could
get an electrical shock because
disconnecting power from this
section does not cut off power
from adjacent sections of the
machine.
WARNING
This safety message means
that you might get seriously
hurt or killed if you open the
product and expose yourself to
hazardous voltage. NEVER
remove the screwed on covers.
ALWAYS refer service
requirements to qualified
service personnel.
WARNING

Stream Punch 2
bizhub PRO C6501 Additional Information 5
2.1.2 Space Requirements
To ensure that machine operation, consumables replenishing, part replace-
ment, and regular maintenance can easily be performed, adhere to the rec-
ommended space requirements detailed below.
Be sure to choose a level and solid floor for the installation place.
64.1
37.329.912.013.8
3.9
6.9
3.9
40.2
15.8
8.1
21.410.0
143.7
4.6
FS-521 - RU-506 - GP-501 - RU-504 - Main body - PF-602
(Unit: inches)
64.1
48.5
37.329.912.013.815.7
3.9
6.9
3.9
40.2
15.8
8.1
21.410.0
159.4
4.6
FS-521 - FD-503 - RU-506 - GP-501 - RU-504 - Main body - PF-602
(Unit: inches)
64.1
37.329.912.013.8
3.9
6.9
3.9
40.2
15.8
8.1
30.921.410.0
174.6
4.6
FS-521 - LS-505 - RU-506 - GP-501 - RU-504 - Main body - PF-602
(Unit: inches)

2Stream Punch
6 bizhub PRO C6501 Additional Information
2
Reminder
Be sure to allow a clearance of 200 mm (7-3/4 in.) or more at the back of
this machine for the ventilation duct.
64.1
37.329.912.013.8
3.9
6.9
3.9
40.2
15.8
8.1
46.121.410.0
189.8
4.6
FS-521 - SD-506 - RU-506 - GP-501 - RU-504 - Main body - PF-602
(Unit: inches)
64.1
37.329.912.013.8
3.9
6.9
7.9
48.1
40.2
15.8
8.1
30.929.122.2
193.9
PB-501/PB-502 - LS-505 - RU-506 - GP-501 - RU-504 - Main body - PF-602
(Unit: inches)

Stream Punch 2
bizhub PRO C6501 Additional Information 7
2.2 Machine Configuration
2.2.1 Standard/Optional Equipment
FS-521
FS-521 - FD-503
FS-521 - LS-505 RU-506 - GP-501 Main Body
DF-609
OC-506
PF-602
HD-506
IC-305 IC-304
HT-504
RU-504
FS-521 - SD-506
PB-501/PB-502 - LS-505

2Stream Punch
8 bizhub PRO C6501 Additional Information
2.2.2 Stream Punch GP-501
1
2
3
4
5
6
7
8
9
10
11
12
13
14

Stream Punch 2
bizhub PRO C6501 Additional Information 9
No. Name Description
1 Stream punch front door Opens to allow replacement of die set or removal of
punch waste and mishandled paper.
2 Lever GP1 Opens downward for removal of mishandled paper.
3 Knob GP3 Turned for removal of mishandled paper.
4 Lever GP2 Opens to the upper-right for removal of mishandled pa-
per.
5 Knob GP4 Turned clockwise to move the punch blade for removal of
mishandled paper or replacement of die set.
6 Mounting of die set Mounts the die set.
7 Punch waste basket Withdrawn for removal of waste paper.
8 Power switch Turned on when using the stream punch.
9 Lever GP5 Opens downward for removal of mishandled paper.
10 Knob GP7 Turned for removal of mishandled paper.
11 Die set punch blade position
indicator
Used to check the position of die set punch blade when
clearing mishandled paper, replacing the die set, or turn-
ing the knob GP4.
12 Lever GP6 Opens to the upper-left for removal of mishandled paper.
13 Knob GP8 Turned for removal of mishandled paper.
14 Die set Punches various types of file holes.

2Stream Punch
10 bizhub PRO C6501 Additional Information
2.3 Using Stream Punch GP-501
Using Stream Punch GP-501, the following six types of punch holes can be
made in printed sheets.
Die set model Hole type
DS-501
DS-502
DS-503
DS-504
DS-505
DS-506

Stream Punch 2
bizhub PRO C6501 Additional Information 11
2.3.1 Punching File Holes in Copies
Copies will be punched in this mode. Follow the procedure below to select
the paper size 8.5” × 11” vand punch position. To select the punch hole
type, change the die set to the desired one.
!
Detail
For detailed specifications of Stream Punch GP-501, see page 21.
Prerequisites
0Available paper size is 8.5” × 11” vonly. Do not use 8.5” × 11” w.
0A power switch is provided on the stream punch. Be sure to turn it on be-
fore turning on the main and sub power switches of the main body.
0The die set model currently mounted on the stream punch cannot be
checked from the control panel. If required, open the front door of the
stream punch to check it before the operation.
1Position the original.
2Touch [Punch] on the Copy Screen.
The Output Application icon shows the punch position currently select-
ed. If you want to change the punch position, proceed to the following
steps.
3Touch [Output Appli.] on the Copy Screen.
The Output Application Screen will be displayed.

2Stream Punch
12 bizhub PRO C6501 Additional Information
4Touch [Hole-Punch].
The Hole-Punch Screen will be displayed.
5Touch the desired key to select the punch position.
6Touch [OK].
– To restore the previous setting, touch [Cancel].
– To release the Hole-Punch function with the current punch position
setting remained, touch [Function Off].
The Output Application Screen will be restored.

Stream Punch 2
bizhub PRO C6501 Additional Information 13
7Touch [OK] on the Output Application Screen.
The specified output mode icon will be displayed on the Copy Screen.

2Stream Punch
14 bizhub PRO C6501 Additional Information
2.3.2 Exchanging the Die Set
Procedure
1Open the stream punch
front door.
2Turn the knob GP4 clock-
wise to set the die set
punch blade position indi-
cator to the horizontal posi-
tion as shown in the
illustration.
– Be sure to align the die
set punch blade posi-
tion indicator to the hor-
izontal line, otherwise
the die set cannot be
withdrawn.
3Slowly withdraw the die set.

Stream Punch 2
bizhub PRO C6501 Additional Information 15
4Take out the desired die set from the rack to replace it with the one cur-
rently set.
– Securely set the die set in position.
5Put the replaced die set into
the rack.
– The replaced die set is
supposed to be stored
in the rack.

2Stream Punch
16 bizhub PRO C6501 Additional Information
6Close the stream punch
front door.