Konica Minolta FK-505 User manual

SERVICE MANUAL
2005.04
Ver. 1.0
FIELD SERVICE
Fax Kit (FK-505)
bizhub_162_210_FS.book 1 ページ ２００５年４月１８日 月曜日 午前１０時５分

bizhub_162_210_FS.book 2 ページ ２００５年４月１８日 月曜日 午前１０時５分

After publication of this service manual, the parts and mechanism may be subject to change for
improvement of their performance.
Therefore, the descriptions given in this service manual may not coincide with the actual machine.
When any change has been made to the descriptions in the service manual, a revised version will be
issued with a revision mark added as required.
Revision mark:
• To indicate clearly a section revised, show to the left of the revised section.
A number within represents the number of times the revision has been made.
• To indicate clearly a section revised, show in the lower outside section of the correspond-
ing page.
A number within represents the number of times the revision has been made.
NOTE
Revision marks shown in a page are restricted only to the latest ones with the old ones deleted.
• When a page revised in Ver. 2.0 has been changed in Ver. 3.0:
The revision marks for Ver. 3.0 only are shown with those for Ver. 2.0 deleted.
• When a page revised in Ver. 2.0 has not been changed in Ver. 3.0:
The revision marks for Ver. 2.0 are left as they are.
1
1
1
1
2005/04 1.0 — Issue of the first edition
Date Service manual Ver. Revision mark Descriptions of revision
bizhub_162_210_FS.book 1 ページ ２００５年４月１８日 月曜日 午前１０時５分

bizhub_162_210_FS.book 2 ページ ２００５年４月１８日 月曜日 午前１０時５分

Fax Kit (FK-505)GeneralMaintenanceAdjustment / Setting
Troubleshooting
Field Service Ver. 1.0 Apr. 2005
i
CONTENTS
General
1. Product specifications ............................................................................................. 1
1.1 Data Flow Diagram ............................................................................................... 2
Maintenance
2. Firmware upgrade ................................................................................................... 5
2.1 Upgrading the Main Firmware (Fax Board)........................................................... 5
2.1.1 Installing the Driver ....................................................................................... 5
2.2 Firmware rewriting ................................................................................................ 7
2.2.1 Procedure for Upgrading the Main Firmware ................................................ 7
2.2.2 Procedure when Upgrading the Firmware has failed .................................... 9
3. Other ..................................................................................................................... 11
3.1 Disassembly/Adjustment prohibited items .......................................................... 11
3.2 Disassembly/Assembly procedure...................................................................... 13
3.2.1 FAX Board and NCU Boards....................................................................... 13
Adjustment/Setting
4. How to use the adjustment section ....................................................................... 15
5. Control Panel Descriptions.................................................................................... 16
5.1 Names of Control Panel Parts and Their Functions ........................................... 16
6. Status Mode .......................................................................................................... 20
6.1 Status Mode Function Tree................................................................................. 20
6.2 Status Mode Setting Procedure.......................................................................... 21
6.2.1 Procedure ................................................................................................... 21
6.2.2 Exiting ......................................................................................................... 21
6.2.3 Changing the Status Mode Functions ......................................................... 21
6.2.4 Total Page ................................................................................................... 21
6.2.5 TX/ RX Result ............................................................................................. 21
6.2.6 Print Report................................................................................................. 22
7. Utility Mode ........................................................................................................... 28
7.1 Utility Mode Function Tree .................................................................................. 28
7.2 Utility Mode Setting Procedure ........................................................................... 30
7.2.1 Procedure ................................................................................................... 30
7.2.2 Exiting ......................................................................................................... 30
7.2.3 Changing the Setting Values in Utility Mode Functions............................... 30
7.3 Setting in the Utility Mode ................................................................................... 30
bizhub_162_210_FS.book i ページ ２００５年４月１８日 月曜日 午前１０時５分

Fax Kit (FK-505)
GeneralMaintenanceAdjustment / Setting
Troubleshooting
Field Service Ver. 1.0 Apr. 2005
ii
7.3.1 MACHINE SETTING................................................................................... 30
7.3.2 PAPER SOURCE SETUP........................................................................... 32
7.3.3 USER MANAGEMENT ............................................................................... 33
7.3.4 ADMIN. MANAGEMENT............................................................................. 33
7.3.5 COPY SETTING 1 ...................................................................................... 37
7.3.6 COPY SETTING 2 ...................................................................................... 38
7.3.7 FAX REGISTRATION.................................................................................. 39
7.3.8 TX OPERATION ......................................................................................... 41
7.3.9 RX OPERATION ......................................................................................... 42
7.3.10 COMM. SETTING....................................................................................... 50
7.3.11 REPORTING............................................................................................... 51
7.3.12 INITIAL USER DATA ................................................................................... 51
8. Service Mode ........................................................................................................ 53
8.1 Service Mode Function Setting Procedure......................................................... 53
8.1.1 Procedure ................................................................................................... 53
8.1.2 Exiting ......................................................................................................... 53
8.1.3 Service Mode Function Setting Value Changing Procedure....................... 53
8.2 Service Mode Function Tree............................................................................... 54
8.3 Setting in the Service Mode ............................................................................... 57
8.3.1 SERVICE’S CHOICE .................................................................................. 57
8.3.2 ADJUST...................................................................................................... 70
8.3.3 COUNTER .................................................................................................. 78
8.3.4 DISPLAY ..................................................................................................... 81
8.3.5 FUNCTION ................................................................................................. 82
8.3.6 SOFT SWITCH ........................................................................................... 85
8.3.7 REPORT ..................................................................................................... 86
8.3.8 FIXED ZOOM CHANGE ............................................................................. 93
8.3.9 FACTORY TEST ......................................................................................... 94
8.3.10 CLEAR DATA .............................................................................................. 95
9. Security ................................................................................................................. 98
9.1 Security Function Setting Procedure.................................................................. 98
9.1.1 Procedure ................................................................................................... 98
9.1.2 Exiting ......................................................................................................... 98
10. Mechanical Adjust................................................................................................. 99
10.1 Adjustment of Jumper Switches on NCU Board................................................. 99
11. Soft Switch Set.................................................................................................... 100
11.1 Default Setting .................................................................................................. 101
11.1.1 Country for each marketing area .............................................................. 101
bizhub_162_210_FS.book ii ページ ２００５年４月１８日 月曜日 午前１０時５分

Fax Kit (FK-505)GeneralMaintenanceAdjustment / Setting
Troubleshooting
Field Service Ver. 1.0 Apr. 2005
iii
11.2 Default soft switch setting for each market area 1 ............................................ 102
11.3 Default soft switch setting for each market area 2 ............................................ 104
11.4 Default soft switch setting for each market area 3 ............................................ 106
11.5 Default soft switch setting for each market area 4 ............................................ 108
11.6 Soft Switch List ................................................................................................. 109
11.7 Soft Switch Definition........................................................................................ 114
11.7.1 SOFT SWITCH: #01 ................................................................................. 114
11.7.2 SOFT SWITCH: #02 ................................................................................. 114
11.7.3 SOFT SWITCH: #03 ................................................................................. 115
11.7.4 SOFT SWITCH: #04 ................................................................................. 116
11.7.5 SOFT SWITCH: #05 ................................................................................. 117
11.7.6 SOFT SWITCH: #06 ................................................................................. 118
11.7.7 SOFT SWITCH: #07 ................................................................................. 118
11.7.8 SOFT SWITCH: #08 ................................................................................. 119
11.7.9 SOFT SWITCH: #09 ................................................................................. 120
11.7.10 SOFT SWITCH: #10 ................................................................................. 121
11.7.11 SOFT SWITCH: #11 ................................................................................. 122
11.7.12 SOFT SWITCH: #12 ................................................................................. 122
11.7.13 SOFT SWITCH: #13 ................................................................................. 123
11.7.14 SOFT SWITCH: #14 ................................................................................. 124
11.7.15 SOFT SWITCH: #15 ................................................................................. 124
11.7.16 SOFT SWITCH: #16 ................................................................................. 125
11.7.17 SOFT SWITCH: #17 ................................................................................. 125
11.7.18 SOFT SWITCH: #18 ................................................................................. 126
11.7.19 SOFT SWITCH: #19 ................................................................................. 127
11.7.20 SOFT SWITCH: #20 ................................................................................. 128
11.7.21 SOFT SWITCH: #21 ................................................................................. 129
11.7.22 SOFT SWITCH: #22 ................................................................................. 130
11.7.23 SOFT SWITCH: #23 ................................................................................. 130
11.7.24 SOFT SWITCH: #24 ................................................................................. 131
11.7.25 SOFT SWITCH: #25 ................................................................................. 131
11.7.26 SOFT SWITCH: #26 ................................................................................. 132
11.7.27 SOFT SWITCH: #27 ................................................................................. 133
11.7.28 SOFT SWITCH: #28 ................................................................................. 133
11.7.29 SOFT SWITCH: #29 ................................................................................. 134
11.7.30 SOFT SWITCH: #30 ................................................................................. 135
11.7.31 SOFT SWITCH: #31 ................................................................................. 136
11.7.32 SOFT SWITCH: #32 ................................................................................. 136
bizhub_162_210_FS.book iii ページ ２００５年４月１８日 月曜日 午前１０時５分

Fax Kit (FK-505)
GeneralMaintenanceAdjustment / Setting
Troubleshooting
Field Service Ver. 1.0 Apr. 2005
iv
11.7.33 SOFT SWITCH: #33 ................................................................................. 137
11.7.34 SOFT SWITCH: #34 ................................................................................. 137
11.7.35 SOFT SWITCH: #35 ................................................................................. 138
11.7.36 SOFT SWITCH: #36 ................................................................................. 139
11.7.37 SOFT SWITCH: #37 ................................................................................. 140
11.7.38 SOFT SWITCH: #38 ................................................................................. 141
11.7.39 SOFT SWITCH: #39 ................................................................................. 141
11.7.40 SOFT SWITCH: #40 ................................................................................. 142
11.7.41 SOFT SWITCH: #41 ................................................................................. 143
11.7.42 SOFT SWITCH: #42 ................................................................................. 143
11.7.43 SOFT SWITCH: #43 ................................................................................. 144
11.7.44 SOFT SWITCH: #44 ................................................................................. 144
11.7.45 SOFT SWITCH: #45 ................................................................................. 145
11.7.46 SOFT SWITCH: #46 ................................................................................. 146
11.7.47 SOFT SWITCH: #47 ................................................................................. 146
11.7.48 SOFT SWITCH: #48 ................................................................................. 147
11.7.49 SOFT SWITCH: #49 ................................................................................. 148
11.7.50 SOFT SWITCH: #50 ................................................................................. 148
11.7.51 SOFT SWITCH: #51 ................................................................................. 149
11.7.52 SOFT SWITCH: #52 ................................................................................. 149
11.7.53 SOFT SWITCH: #53 ................................................................................. 149
11.7.54 SOFT SWITCH: #54 ................................................................................. 150
11.7.55 SOFT SWITCH: #55 ................................................................................. 150
11.7.56 SOFT SWITCH: #56 ................................................................................. 151
11.7.57 SOFT SWITCH: #57 ................................................................................. 151
11.7.58 SOFT SWITCH: #58 ................................................................................. 151
11.7.59 SOFT SWITCH: #59 Part 1 ...................................................................... 152
11.7.60 SOFT SWITCH: #59 Part 2 ...................................................................... 153
11.7.61 SOFT SWITCH: #59 Part 3 ...................................................................... 154
11.7.62 SOFT SWITCH: #60 ................................................................................. 155
11.7.63 SOFT SWITCH: #61 ................................................................................. 156
11.7.64 SOFT SWITCH: #62 ................................................................................. 156
11.7.65 SOFT SWITCH: #63 ................................................................................. 157
11.7.66 SOFT SWITCH: #64 ................................................................................. 157
12. Fax Protocols ...................................................................................................... 158
12.1 G3 ECM (G3 Error Correction Mode)............................................................... 158
12.2 Line Control ...................................................................................................... 159
12.2.1 Procedure of G3 mode communication .................................................... 159
bizhub_162_210_FS.book iv ページ ２００５年４月１８日 月曜日 午前１０時５分

Fax Kit (FK-505)GeneralMaintenanceAdjustment / Setting
Troubleshooting
Field Service Ver. 1.0 Apr. 2005
v
12.3 Table of Reference Code .................................................................................. 160
12.4 How to Analyze the T30 Protocol Monitor ........................................................ 161
Troubleshooting
13. Fax Error ............................................................................................................. 169
13.1 Communication Error........................................................................................ 169
13.1.1 Outline....................................................................................................... 169
13.1.2 Error occurring during transmission .......................................................... 169
13.1.3 Error occurring during reception ............................................................... 169
13.2 Error Code ........................................................................................................ 170
13.2.1 Reception.................................................................................................. 170
13.2.2 Transmission ............................................................................................. 172
bizhub_162_210_FS.book v ページ ２００５年４月１８日 月曜日 午前１０時５分

Fax Kit (FK-505)
GeneralMaintenanceAdjustment / Setting
Troubleshooting
Field Service Ver. 1.0 Apr. 2005
vi
Blank page
bizhub_162_210_FS.book vi ページ ２００５年４月１８日 月曜日 午前１０時５分