Konica Minolta MS7000 MK II User manual

0816-7732-01
0816-7732-01 CK
2004.6
konicaminolta.com
30mm
MS7000 MKII
User's Guide

Energy Star®
As an ENERGY STAR®Partner, we have determined that this machine meets the ENERGY
STAR®Guidelines for energy efficiency.
What is an ENERGY STAR®Product?
An ENERGY STAR®product has a special feature that allows it to automatically switch to a
“low-power mode” after a period of inactivity. An ENERGY STAR®product uses energy
more efficiently, saves you money on utility bills and helps protect the environment.
Only the setting of “Auto Power Save (15 min.)” complies with the Energy Star standard.
0816773201.book i ページ ２００４年６月２４日 木曜日 午後６時１４分

P-1
SAFETY INFORMATION
This section contains detailed instructions on the operation and maintenance of this
machine. To achieve optimum utility of this device, all operators should carefully
read and follow the instructions in this manual. Please keep this manual in a handy
place near the machine.
Make sure you observe all of the precautions listed in this manual.
*Ver07
Please note that some parts of the contents of this section may not correspond with the purchased product.
Warning and Precaution Symbols
Meaning of Symbols
Ignoring this warning could cause serious injury or
even death.
Ignoring this caution could cause injury or damage
to property.
A triangle indicates a danger against which you should take precaution.
This symbol warns against cause burns.
A diagonal line indicates a prohibited course of action.
This symbol warns against dismantling the device.
A black circle indicates an imperative course of action.
This symbol indicates you must unplug the device.
0816773201.book 1 ページ ２００４年６月２４日 木曜日 午後６時１４分

SAFETY INFORMATION
P-2
• Do not modify this product, as a fire, electrical shock, or break-
down could result. If the product employs a laser, the laser beam
source could cause blindness.
• Do not attempt to remove the covers and panels which have been
fixed to the product. Some products have a high-voltage part or a
laser beam source inside that could cause an electrical shock or
blindness.
• Only use the power cord supplied in the package. If a power cord
is not supplied, only use the power cord and plug that is specified
in POWER CORD INSTRUCTION. Failure to use this cord could
result in a fire or electrical shock.
• Use the power cord supplied in the package only for this machine
and NEVER use it for any other product. Failure to observe this
precaution could result in a fire or electrical shock.
• Use only the specified power source voltage. Failure to do that
could result in a fire or electrical shock.
• Do not use a multiple outlet adapter to connect any other appli-
ances or machines. Use of a power outlet for more than the
marked current value could result in a fire or electrical shock.
Do not unplug and plug in the power cord with a wet hand, as an
electrical shock could result.
Plug the power cord all the way into the power outlet. Failure to do
this could result in a fire or electrical shock.
• Do not scratch, abrade, place a heavy object on, heat, twist, bend,
pull on, or damage the power cord. Use of a damaged power cord
(exposed core wire, broken wire, etc.) could result in a fire or
breakdown.
Should any of these conditions be found, immediately turn OFF
the power switch, unplug the power cord from the power outlet,
and then call your authorized service representative.
• Do not use an extension cord, in principle. Use of an extension
cord could cause a fire or electrical shock. Contact your autho-
rized service representative if an extension cord is required.
0816773201.book 2 ページ ２００４年６月２４日 木曜日 午後６時１４分

SAFETY INFORMATION
P-3
Do not place a flower vase or other container that contains water, or
metal clips or other small metallic objects on this product. Spilled
water or metallic objects dropped inside the product could result in a
fire, electrical shock, or breakdown.
Should a piece of metal, water, or any other similar foreign matter
get inside the product, immediately turn OFF the power switch,
unplug the power cord from the power outlet, and then call your
authorized service representative.
• Do not keep using this product, if this product becomes inordi-
nately hot or emits smoke, or unusual odor or noise. Immediately
turn OFF the power switch, unplug the power cord from the power
outlet, and then call your authorized service representative. If you
keep on using it as is, a fire or electrical shock could result.
• Do not keep using this product, if this product has been dropped
or its cover damaged. Immediately turn OFF the power switch,
unplug the power cord from the power outlet, and then call your
authorized service representative. If you keep on using it as is, a
fire or electrical shock could result.
Do not throw the toner cartridge or toner into an open flame. The hot
toner may scatter and cause burns or other damage.
Connect the power cord to an electrical outlet that is equipped with a
grounding terminal.
0816773201.book 3 ページ ２００４年６月２４日 木曜日 午後６時１４分

SAFETY INFORMATION
P-4
• Do not use flammable sprays, liquids, or gases near this product,
as a fire could result.
• Do not leave a toner unit or drum unit in a place within easy reach
of children. Licking or ingesting any of these things could injure
your health.
• Do not let any object plug the ventilation holes of this product.
Heat could accumulate inside the product, resulting in a fire or
malfunction.
• Do not install this product at a site that is exposed to direct sun-
light, or near an air conditioner or heating apparatus. The resultant
temperature changes inside the product could cause a malfunc-
tion, fire, or electrical shock.
• Do not place the product in a dusty place, or a site exposed to
soot or steam, near a kitchen table, bath, or a humidifier. A fire,
electrical shock, or breakdown could result.
• Do not place this product on an unstable or tilted bench, or in a
location subject to a lot of vibration and shock. It could drop or fall,
causing personal injury or mechanical breakdown.
• After installing this product, mount it on a secure base. If the unit
moves or falls, it may cause personal injury.
• Do not store toner units and PC drum units near a floppy disk or
watch that are susceptible to magnetism. They could cause these
products to malfunction.
The inside of this product has areas subject to high temperature,
which may cause burns. When checking the inside of the unit for
malfunctions such as a paper misfeed, do not touch the locations
(around the fusing unit, etc.) which are indicated by a “CAUTION
HOT” caution label.
Do not place any objects around the power plug as the power plug
may be difficult to pull out when an emergency occurs.
The socket-outlet shall be installed near the machine and shall be
easily accessible as the power plug may be difficult to pull out when
an emergency occurs.
0816773201.book 4 ページ ２００４年６月２４日 木曜日 午後６時１４分

SAFETY INFORMATION
P-5
Precautions for Routine
• Always use this product in a well ventilated location. Operating the
product in a poorly ventilated room for an extended period of time
could injure your health. Ventilate the room at regular intervals.
• Whenever moving this product, be sure to disconnect the power
cord and other cables. Failure to do this could damage the cord or
cable, resulting in a fire, electrical shock, or breakdown.
• When moving this product, always hold it by the locations speci-
fied in the operator’s manual or other documents. If the unit falls it
may cause severe personal injury. The product may also be dam-
aged or malfunction.
• Remove the power plug from the outlet more than one time a year
and clean the area between the plug terminals. Dust that accumu-
lates between the plug terminals may cause a fire.
• When unplugging the power cord, be sure to hold onto the plug.
Pulling on the power cord could damage the cord, resulting in a
fire or electrical shock.
• Do not store toner units, PC drum units, and other supplies and
consumables in a place subject to direct sunlight and high temper-
ature and humidity, as poor image quality and malfunction could
result.
• Do not attempt to replace the toner unit and PC drum unit in a
place exposed to direct sunlight. If the PC drum is exposed to
intense light, poor image quality could result.
• Do not unpack a toner unit or PC drum unit until the very time of
use. Do not leave an unpacked unit standing. Install it immediately
or poor image quality could result.
• Do not keep toner units and PC drum units in an upright position
or upside down, as poor image quality could result.
• Do not throw or drop a toner unit or PC drum unit as poor image
quality could result.
• Do not use this product in an area where ammonia or other gases
or chemicals are present. Failure to do so may shorten the service
life of the product, cause damage or decrease performance.
• Do not use this product in an environment with a temperature out-
side the range specified in the operator’s manual, as a breakdown
or malfunction could result.
• Do not attempt to feed stapled paper, carbon paper or aluminum
foil through this product, as a malfunction or fire could result.
0816773201.book 5 ページ ２００４年６月２４日 木曜日 午後６時１４分

SAFETY INFORMATION
P-6
Do not touch or scratch the surface of the toner unit developing roller
and the PC drum, as poor image quality could result.
Use the supplies and consumables recommended by the dealer. Use
of any supply or consumable not recommended could result in poor
image quality and breakdown.
0816773201.book 6 ページ ２００４年６月２４日 木曜日 午後６時１４分

Welcome
i
Welcome
This User’s Guide explains how to operate the unit and replenish its
supplies. It also gives some troubleshooting tips as well as general
precautions to be observed when operating the unit.
To ensure the best performance and effective use of your unit, read this
User’s Guide carefully until you familiarize yourself thoroughly with the
unit's operation and features.
Please keep this User’s Guide and use it as a quick and handy reference
tool for immediately clarifying any questions that may arise.
Please follow the instructions given in this User’s Guide when handling the
system and do not touch any part of the system the User’s Guide does not
cover.
NEVER attempt to disassemble or remodel the system.
The contents of this User’s Guide are subject to change without notice.
No part of this User’s Guide may be quoted, reproduced, or translated into
any other language.
0816773201.book i ページ ２００４年６月２４日 木曜日 午後６時１４分

Contents
ii
Contents
1 Notes to Operators and Key Operators
1.1 The following safety rules should be observed .............................. 1-1
FCC Part 15 - Radio Frequency Devices (For U.S.A. Users).......... 1-1
WARNING ....................................................................................... 1-1
Interference-Causing Equipment Standard (ICES-003 ISSUE 3)
(For Canada Users) ......................................................................... 1-2
CE Marking (Declaration of Conformity) (For European Users) ...... 1-2
Acoustic Noise................................................................................. 1-2
1.2 Safety Information (MSP 3000 Printer)............................................. 1-3
Laser Safety..................................................................................... 1-3
Internal Laser Radiation................................................................... 1-3
For United States............................................................................. 1-3
Laser Safety..................................................................................... 1-3
CDRH Regulations .......................................................................... 1-3
All other users.................................................................................. 1-4
For Denmark.................................................................................... 1-4
For Finland, Sweden........................................................................ 1-4
For Norway ...................................................................................... 1-5
WARNING LABEL ........................................................................... 1-6
OZONE RELEASE (For all Users)................................................... 1-7
WARNING LABEL ........................................................................... 1-7
2 Precautions
2.1 Installation Precautions..................................................................... 2-1
Installation Site ................................................................................ 2-1
Power Source .................................................................................. 2-2
Grounding........................................................................................ 2-2
Space Requirements ....................................................................... 2-3
Operating Environment.................................................................... 2-4
Using the Printer.............................................................................. 2-4
Care of Printer Supplies................................................................... 2-5
3Scanner
3.1 System Overview ............................................................................... 3-1
3.2 System Configuration........................................................................ 3-2
PR Mode (connected to a printer).................................................... 3-2
PC Mode (connected to a personal computer)................................ 3-2
0816773201.book ii ページ ２００４年６月２４日 木曜日 午後６時１４分

Contents
iii
3.3 Parts of the Scanner...........................................................................3-3
3.4 Control Panel Keys and Indicators ...................................................3-5
Control Panel 1 (Basic) ....................................................................3-5
Control Panel 1 (Shift Function) .......................................................3-9
Control Panel 2 ..............................................................................3-10
When Misfeed/Call-Tech.-Rep. Indicator Lights up........................3-12
3.5 Image Processing Functions...........................................................3-14
3.6 Turning the Power On and Off.........................................................3-16
Turning ON.....................................................................................3-16
Turning OFF...................................................................................3-17
3.7 Auto Power Save Mode ....................................................................3-18
3.8 Printing or Scanning Procedure......................................................3-19
3.9 Selecting a Projection Lens.............................................................3-20
3.10 Replacing the Projection Lens ........................................................3-21
3.11 Positioning the Film Image ..............................................................3-22
3.12 Zooming, Focusing, and Image Rotation .......................................3-23
Zooming .........................................................................................3-23
Focusing.........................................................................................3-23
Image Rotation...............................................................................3-23
3.13 Selecting the Film Type....................................................................3-25
Auto................................................................................................3-25
Nega (negative film) .......................................................................3-25
Posi (positive film) ..........................................................................3-26
3.14 Selecting the Paper Size ..................................................................3-27
Selecting the Paper Size................................................................3-27
Using the Auto Paper Selection Function ......................................3-27
Using the Auto Film Format Selection Function.............................3-28
3.15 Selecting the Print Position .............................................................3-29
Center ............................................................................................3-29
Left .................................................................................................3-29
Page-by-Page ................................................................................3-29
3.16 Selecting the Image Density ............................................................3-30
Using Auto Exposure .....................................................................3-30
Using Manual Exposure .................................................................3-30
3.17 Entering the Number of Prints to be Made.....................................3-32
1 to 9 ..............................................................................................3-32
10 to 99 ..........................................................................................3-32
Correcting a Number......................................................................3-32
3.18 Using Auto Masking .........................................................................3-33
0816773201.book iii ページ ２００４年６月２４日 木曜日 午後６時１４分

Contents
iv
Selecting Auto Masking ................................................................. 3-33
Operating Conditions for Auto Masking......................................... 3-33
3.19 Manual Masking Panels (Option).................................................... 3-34
3.20 Using Manual Masking .................................................................... 3-35
Selecting Trimming ........................................................................ 3-35
Defining an Area............................................................................ 3-36
Defining Two Separate Areas........................................................ 3-36
Defining Page-by-Page Print Area................................................. 3-37
Clearing a Defined Print Area........................................................ 3-37
Selecting Masking.......................................................................... 3-38
3.21 Using Centering and Fit................................................................... 3-39
Centering ....................................................................................... 3-39
Fit................................................................................................... 3-40
3.22 Using the Cycle Print Mode............................................................. 3-41
Specifying the interval between scanning operations.................... 3-41
Operating in the Cycle Print Mode................................................. 3-42
3.23 Selecting the Connection Mode...................................................... 3-43
3.24 Selecting the Resolution ................................................................. 3-44
3.25 Registering the Job Program.......................................................... 3-45
3.26 Calling the Job Program.................................................................. 3-46
3.27 Using the Electrical Zoom ............................................................... 3-47
Zoom + .......................................................................................... 3-47
Zoom - ........................................................................................... 3-47
Skip of magnification...................................................................... 3-48
Clearing the Zoom magnification................................................... 3-49
3.28 Adjusting the Illumination of the Screen ....................................... 3-50
3.29 Replacing the Projection Lamp....................................................... 3-51
4 System Printer (option)
4.1 Parts of the Printer............................................................................. 4-1
4.2 Paper Specifications.......................................................................... 4-3
Use only the following types of paper:............................................. 4-3
4.3 Set the Paper ...................................................................................... 4-4
Loading Paper into the Paper Feeding Tray.................................... 4-4
Loading Paper in the Paper Cassette.............................................. 4-5
4.4 Replacing the Toner Cartridge.......................................................... 4-7
4.5 When the Paper Misfeed Indicator Lights Up................................ 4-10
If the Misfeed Indicator lights up along with a P0 code:................. 4-10
If the Misfeed Indicator lights up along with a P1, P2 or P3 code:. 4-10
0816773201.book iv ページ ２００４年６月２４日 木曜日 午後６時１４分

Contents
v
Clearing a Misfeed from the Paper Feeding Tray ..........................4-10
Clearing a Misfeed from the Paper Cassette .................................4-12
Clearing a Misfeed from inside the Printer .....................................4-13
4.6 Solving Irregular Printing Problems ...............................................4-15
5 Miscellaneous
5.1 Specifications .....................................................................................5-1
PC Mode ..........................................................................................5-2
PR Mode ..........................................................................................5-2
5.2 Initial Settings .....................................................................................5-3
System Settings by the dealer .......................................................5-12
5.3 System Care ......................................................................................5-14
Cleaning the Scanner Screen ........................................................5-14
Outer Covers..................................................................................5-14
Carrier Glass (Option) ....................................................................5-15
Cleaning the System Printer (Option) ............................................5-16
5.4 For Key Operator’s Use....................................................................5-17
0816773201.book v ページ ２００４年６月２４日 木曜日 午後６時１４分

1Notes to Operators and Key Operators
1-1
1 Notes to Operators and Key Operators
1.1 The following safety rules should be observed
1. The unit should be kept free from moisture, dirt, dust and exposure to
heat and direct sunlight at all times.
2. Keep hands, hair and clothing away from rollers and other moving
parts.
3. Before removing the Projection Lamp Unit, confirm that the machine is
turned "OFF".
4. Be sure that the proper voltage is used and that the machine is well
grounded.
The use of electrical extension cords is strongly discouraged.
5. For best performance, only our authorized supplies are recommended
for use with this unit. Failure to use our authorized supplies may cause
damage to the unit, in which case the warranty may be rendered void.
6. Do not attempt to remove any Cover that is secured,
FCC Part 15 - Radio Frequency Devices (For U.S.A. Users)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including
interference that may cause undesired operation.
WARNING
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
The design and production of this unit conforms to FCC regulations, and
any changes or modifications must be registered with the FCC and are
subject to FCC control. Any changes made by the purchaser or user
without first contacting the manufacturer will be subject to penalty under
FCC regulations.
0816773201.book 1 ページ ２００４年６月２４日 木曜日 午後６時１４分

Notes to Operators and Key Operators 1
1-2
Interference-Causing Equipment Standard (ICES-003 ISSUE 3)
(For Canada Users)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003
du Canada.
CE Marking (Declaration of Conformity) (For European Users)
This product complies with the following EU directives:
89/336/EEC, 73/23/EEC and 93/68/EEC directives.
This declaration is valid for the area of the European Union(EU) only.
This device must be used with shielded interface cable and shielded
network cable.
The use of non-shielded cable is likely to result in interference with radio
communications and is prohibited under rules.
Acoustic Noise
Machine Noise Regulation 3 GSGV, 18.01.1991: The sound pressure
level at the operator position according to EN27779 is equal to or less than
70dB (A).
0816773201.book 2 ページ ２００４年６月２４日 木曜日 午後６時１４分

1Notes to Operators and Key Operators
1-3
1.2 Safety Information (MSP 3000 Printer)
Laser Safety
This printer is a page printer which operates by means of a laser. There is
no possibility of danger from the laser, provided the printer is operated
according to the instructions provided in this manual.
Since radiation emitted by the laser is completely confined within
protective housing, the laser beam cannot escape from the machine
during any phase of user operation.
Internal Laser Radiation
Maximum Radiation Power: 8.8 ×10-4(W)
Wave Length: 770-810 (nm)
This is a Class IIIb Laser Diode Assy. that has an invisible laser beam. The
print head unit is NOT A FIELD SERVICE ITEM. Therefore, the print head
unit should not be opened under any circumstances.
For United States
Laser Safety
This printer is certified as a Class 1 Laser product under the U.S. Depart-
ment of Health and Human Service (DHHS) Radiation Performance
Standard according to the Radiation Control for Health and Safety Act of
1968. This means that the printer does not produce hazardous laser radi-
ation.
CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S.
Food and Drug Administration implemented regulations for laser products
on August 2, 1976. These regulations apply to laser products manufac-
tured from August 1. Compliance is mandatory for products marketed in
the United States. The label shown below indicates compliance with the
CDRH regulations and must be attached to laser products marketed in the
United States.
WARNING
§Use of controls, adjustments or performance of procedures other than
those specified in this manual may result in hazardous radiation
exposure.
0816773201.book 3 ページ ２００４年６月２４日 木曜日 午後６時１４分

Notes to Operators and Key Operators 1
1-4
All other users
WARNING
§Use of controls, adjustments of performance or procedures other than
those specified in this manual may result in hazardous radiation expo-
sure.
This is a semiconductor laser. The maximum power of the laser diode is
8.8 ×10-4W and the wavelength is 770-810 nm.
For Denmark
ADVARSEL
§Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af
funktion. Undgå udsttelse for stråling. Klasse 1 laser produkt der op-
fylder IEC60825 sikkerheds kravene.
For Finland, Sweden
VAROITUS!
§Laitteen käyttäminen muulla kuin tässä köyttöohjeessa mainitulla
tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle
näkymättömälle lasersäteilylle
VARNNING
§Om apparaten används på annat sätt än i denna bruksanvisning
specificerats, kan använderen utsattasr för osynling laserstrålnig, som
överskrider gränsen för laserklass 1.
0816773201.book 4 ページ ２００４年６月２４日 木曜日 午後６時１４分

1Notes to Operators and Key Operators
1-5
VARO
§Avattaessa ja suojalukitus ohitettaessa olet alttiina nakymattomalle la-
sersateilylle. Aja katso sateeseen.
VARNING
§Osynlig laserstråining när denna del är öppnad och spärren är urkop-
plad. Betrakta ej stråien.
For Norway
ADVARSEL
§Dersum apparatet brukes på annen måte enn spesifisert i denne bruk-
sanvisning, kan brukeren utsettes for unsynlig laserstråling som over-
skrider grensen for laser klasse 1.
Dette er en halvleder laser. Maksimal effeckt til laserdiode er 8.8 ¥10-4W
og bolgelengde er 770-810 nm.
0816773201.book 5 ページ ２００４年６月２４日 木曜日 午後６時１４分

Notes to Operators and Key Operators 1
1-6
WARNING LABEL
0816773201.book 6 ページ ２００４年６月２４日 木曜日 午後６時１４分