Konica Minolta PS7000C MKII User manual

PS7000C MKII Full Color Digital Book sCanner
Quick Guide

FOR A BOOK ORIGINAL
Place the original face up on the
book table, aligning the top edge
of the book against the stopper,
and the spine of the book with
the center mark.
CENTER MARK
FOR A SHEET ORIGINAL
Place the original face up on the book table, aligning the top
edge of the book against the stopper.
When making spread or split scans, align the center of the book
with the center mark. For a right page scan, align the left edge
of the book to the center mark, and for a left page scan, align
the right edge of the book to the center mark.
1Placing the original

FOR A 3D OBJECT
Place the 3D object face up on the book table. Optimum exposure can be
obtained by placing the 3D object on a piece of white paper.
1Placing the original

HOW TO PLACE THE ORIGINAL ON THE BOOK TABLE
Do not place the original askew.
Do not place the book with its top edge
beyond the stopper.
Be careful to avoid the condition shown
in the figure above if pressing the
original from the bottom.
When the original is spread open,
be careful not to produce any gaps
between pages.
Make sure that book is pressed down
completely so it is as flat as possible.
1Placing the original

Hold the edges of both pages at the
middle with your hands, and press
the book down, pulling the pages
slightly apart.
Adjust the height of the book table
so that the right and left pages
will be horizontal.
Notes:
When the inclination of the page at the
center of the book exceeds 50°, the image
may not be read correctly.
Press down the
higher side of the original.
Auto Focus is only effective within the
range of 50 mm (2 inches) above the usual
height of the book table. Adjust the book
table height so that the original is placed in
the effective Auto Focus range.
CAUTION! Optional cradle is
adjustable and has moving parts.
There is a possibility of catching
fingernails when adjusting the cradle.

2Using the optional glass plate unit
1. After spreading the book or placing a document on the book
table, hold the glass plate unit by its handle, and gently lower it
onto the document to flatten.
2. After scanning has completed, hold the unit by its handle and
gently lift up.
2Using the optional
glass plate unit

3Initiate “SCAN” & Print with Image DIVA
A. Make your scan selections.
B. Click or touch the “Scan” button on the Image DIVA screen.

E. Image DIVA will show the “Now Printing”
message when starting.
3Initiate “SCAN” & Print
with Image DIVA
C. Scanned image will appear in the preview area.
D. Click or touch the “Print” button on the Image DIVA screen.

4Initiate “SCAN” by using the manual switch
Press Manual Switch button.
Left side page scan – Press the left side manual switch.
Right side page scan – Press the right side manual switch.
4Initiate “SCAN” by using
the manual switch

©2008 KONICA MINOLTA BUSINESS SOLUTIONS U.S.A., INC. All rights reserved. Reproduction in whole or in
part without written permission is prohibited. Konica Minolta is a trademark of KONICA MINOLTA HOLDINGS, INC.
The essentials of imaging is a registered trademark of KONICA MINOLTA HOLDINGS, INC. All other brands and
product names are registered trademarks or trademarks of their respective owners.
KONICA MINOLTA
BUSINESS SOLUTIONS U.S.A., INC.
100 Williams Drive
Ramsey, NJ 07446
www.kmbs.konicaminolta.us
www.kmbs.konicaminolta.us/solutions