Korenix JetNet 6710G User manual

JetNet 6710G / 6810G Series
Industrial 8-Port PoE plus 2 Gigabit-TX
Managed Etherenet Switch
Quick Installation Guide
www.korenix.com
V1.0

1. Overview
The JetNet 6710G/6810G series are Managed Industrial Power over Ethernet Switches,
equipped with eight 10/100 TX ports with 15.4 watts PoE injector and dual 10/100/1000 TX
ports for uplink connection.
By software conguration or by LLDP auto detection, the eight 10/100 TX PoE injector ports
of JetNet 6710G series can deliver 15.4W by IEEE 802.3af or 30W by the latest High Power
PoE IEEE 802.3at standard for supporting High Power Requiring Devices (PD).
Besides, the eight IEEE 802.3af PoE injector ports of JetNet 6810G series are designed with
the Korenix patented Booster PoE technology, which allows the switches to adopt 24~57VDC
input and deliver 15.4W per port at 48V for applications where DC 48V power supply is not
available.
The 2 Gigabit Ethernet ports can provide high speed uplink connectivity to higher level
backbone switches with Korenix MSRTM network redundancy technology, which can recover
any failure in less than 5milliseconds. To work under vibration and shock environments, the
switches are designed with industrial D-coded M12 connectors or rugged RJ45 connectors to
ensure exceptional solid Ethernet and PoE connections.
1-1 Packing List Checking
The JetNet 6000G series is shipped with the following items. If any of these items is missing
or damaged, please contact your customer service representative for assistance.
JetNet 6710G Managed High Power
IEEE 802.3at PoE Switch (M12 / Rugged RJ)
JetNet 6810 Managed Booster PoE
Switch ( M12 / Rugged RJ)
M12 on DB9 Shielded Console Cable
Rugged M12 D-coded 4-pole
Field Assemble able Connecter
Rugged M12 A-coded 8-pole
Field Assemble able Connector
Rugged RJ45 Field Assemble
able Connecter
2 Wall-Mount kits & 8 Screws
Quick Installation Guide
Documentation and Software CD-ROM
JetNet
6710G-M12
JetNet
6710G-RJ
JetNet
6810G-M12
JetNet
6810G-M12
1
1
1
1
1
1
11 1 1
1 1
1 1
11
88
22
1 1
10 10
1
1

1-2 Introduction to the Manual
2. Appearances
The following manuals are included as PDF les on the CD-ROM:
4Quick Installation Guide: includes information on installing all versions of JetNet 6710G /
6810G series PoE Switch
4User manual – Conguration: applied to the managed versions of JetNet 6710G/
6810G series PoE Switch
3. Hardware Installation
3-1 Powering of the system
The Power input port is located at the top of the front panel and supports redundant input
function via a proprietary assembly capable IP-67 connector (CDG-L207SA) included in the
shipment. If you cannot nd this power connector, please contact your local distributor. For
the available input power range and recommended cable size, please refer to the below
table.
Recommended
48
48
24
24
Maximum
60
60
60
60
Minimum
48
48
22
22
Redundant Input
V1, V2
V1, V2
V1, V2 bind together
V1, V2 bind together
AWG No. / Cable
Area (mm2)
AWG 14 / 2.0
AWG 14 / 2.0
AWG 14 / 2.0
AWG 14 / 2.0
JetNet 6710G-M12
JetNet 6710G-RJ
JetNet 6810G-M12
JetNet 6810G-RJ
Power Input (DC Voltage) Input Conductor Cable Size
Redundant
Power Input
Console
Port Alarm
Output
8x10/100 Base-TX PoE
M12 D-coding
2x1000 Base-T
M12 A-coding
LED: Power, PoE Status, Port Status,
Alarm, System Status, Ring Status
JetNet 6710G-M12 JetNet 6710G-RJ
Redundant
Power Input
Console
Port Alarm
Output
8x10/100 Base-TX PoE
M12 D-coding
2x1000 Base-T
M12 A-coding
LED: Power, PoE Status, Port Status,
Alarm, System Status, Ring Status

The JetNet 6810G only supports single power input that binds V1 and V2 together to obtain
higher current for the booster.
Use the UL listed Switching power supply to power the JetNet Switch. For the power wiring
method, please refer to the gures 3.1-1 and 3.1-2. For system safety and the anti-immunity
ability, the chassis ground screw should be well grounded to the earth ground.
Figure 3.1-1. Power Supply wiring architecture
Note:
E.G: Earth
Grounding
Figure 3.1-2 Power connector assembly diagram
The RS-232 console and the alarm relay are
connected via the assembly type of 5-pole M12
A-coding connector included in the supplied
package of JetNet switch. The following figure
3-2-1 is the disassembly diagram of M12
A-coding connector.
In the M12 connector packing, the parts 1, 2, 3
are already assembled.
Follow the steps for soldering and assembling
the cable and connector together: Figure 3.2-1 Field Assemble
M12 disassembly connector
3.2 RS-232 console and Relay Output Connection

Step -1: Slide component 4, 5, 6 and then 7 over the console
cable. Keep them loose. Do not tighten them yet. 2 cable glands
are provided for cable diameter from 3.5 to 5.8 mm. Choose the
one that best ts the cable.
Step-2: Solder the conductors with the copper
wires according to the pin assignment. The
soldering side view of the pin is shown as below:
Console port pin assignment
Step-3: Fasten the components
4, 5, 6 and 7 in sequence. Be
sure the gasket is on the right
position. See the below M12
assembly diagram: 2. Insert part 6-seal into part 5.
4. Finalized
1. Assembly part 1 and 4,
ensure the solder pins are
protected by part 4-gasket,
then locking part 1 and 5.
3. Locking part 5 and 7.
Never install or work on/with the equipment or the
cabling during the period of its lightning activity.
3.3 Assembly of Ethernet Patch Cables
You can connect terminal devices and other segments via twisted pair cables. Ports which
are not assigned should be closed with the covering caps contained in the package list of
delivery to guarantee the connector is clear without rust.
!

3.3.1 Assembly of M12 Ethernet
Connector
For Fast Ethernet M12 D-Code to M12
D-Code connection, you can use either
version below:
M12-to-M12 Ethernet Cable Wiring
For Fast Ethernet M12 D-Code to RJ45
connection, the pin assignment of the patch
cable is shown below:
M12-to-RJ45 Ethernet Cable Wiring
For Gigabit Ethernet M12 A-Code to RJ45 connection, the pin assignment of the patch
cable is shown below:
Gigabit M12-to-RJ45 Ethernet Cable Wiring
M12-to-RJ45 Ethernet Cable Wiring
3.3.2. Assembly of Rugged RJ45 Connector
The RJ version provides robust connection by the
eld assembly capable rugged RJ45 connector.
Each component of the connector is shown below:
3.3.2-1 Rugged RJ45 Connecter Components

Follow the steps to assemble the rugged RJ45 connector:
M12-to-RJ45 Ethernet Cable Wiring
RJ45 Cable color code
Following picture-19 shows the color code of Cat.-5E UTP/STP cable based on the two
standards released by TIA/EIA – 568A and 568B. The 568B wiring is by far, the most
common wiring method. You can choose the method that suits your application; but
ensure that both ends of the cable use the same standard.

4. Device Management
4.1 Preparation for console management
Attach the RS-232 DB9 connector to your PC’s COM port. Connect the M12 A-code 5-pin
connector to the console port of the JetNet 6710G/6810G.
JetNet 6710G / 6810G series switches provide both in-band and out-band configuration
methods. You can congure the switch via the RS232 console with the attached console
cable, or you can remotely manage the switch via network using Telnet/SSH, Web/HTTPS
management.
3.4 Wall /Panel Mounting Installation
The JetNet 6710G/6810G series are shipped with 1 set mounting bracket which allows users
to install JetNet 6710G/6810G on the panel or wall. Assemble the brackets on the rear side
of JetNet 6710G/6810G body, then using a suitable screw install onto wall / panel of cabinet
with good heat dissipation.
4.1.1 Go to Start -> Program -> Accessories -> Communication -> Hyper Terminal
4.1.2 Give a name to the new console connection to create a new serial communication
session.
4.1.3 Choose the COM name, and select the correct serial settings. The serial settings of
JetNet 6710G/6810G are as below:
Baud Rate: 9600 / Parity check: None / Data Bit: 8 / Stop Bit: 1

4.2 Preparation for Web management
Before you attempt to use the embedded web interface to manage switch operation, verify
that your JetNet switch is properly installed on your network and that every PC on this
network can access the switch via the web browser.
4.2.1 Launch the web browser (Internet Explorer or Mozilla Firefox) on the PC.
4.2.2 Type http:// 6710G_IP_Address or 6810G_IP_Address (The default IP address is
192.168.10.1.), then press Enter.
4.2.3 The login screen will appear next. Type-in the user name and the password. The
default user name and password is admin/admin.
4.2.4 Click OK, and then the welcome page of the web-based management interface will
appear.
At the left column of the Web management interface are listed the available software
features; by pressing the ring column you can also view the detailed conguration
interface.
For more detailed management features please refer to the software’s users’ manual. The
software user manual can be downloaded from Korenix Website as below:
http://www.korenix.com/downloads.htm
4.1.4 After connected, you can see Switch login request. Type-in the username and
password to login. The default username is “admin”, password is “admin” for console
interface.
4.1.5 Follow the manual to congure the device features.

1. 概要
JetNet 6710G/6810G系列是一款网管型PoE以太网交换机，配有8个可提供30W/15.4W的
10/100 TX PoE供电端口和2个千兆上联网口。
通过软件设置或LLDP自动检索功能，JetNet 6710G系列的8个10/100 TX PoE供电端口可以提
供满足IEEE 802.3af标准的15.4W电量输出，以及满足IEEE 802.3at标准的30W高电量输出。
此外，JetNet 6810G系列配备的8个满足IEEE 802.3af标准的供电端口，支持科洛理思PoE升
压专利技术。交换机藉由此技术允许24~57VDC电源输入范围，却提供48V电源输出及15.4W
电量输出。适用于机器设备需要48V电源输入，却因现场安装限制无提供48V的应用。2个
千兆以太网口提供高速上联通道，连接满足Korenix MSRTM专利冗余技术的高层主干交换机。
Korenix MSRTM技术可以在5ms之内处理网络中断恢复通讯。在持续振动和冲击的环境中，交
换机配备坚固的工业D-Code M12接头或RJ45接头，能提供异常牢固的以太网和PoE连接。
1-1 产品清单
JetNet 6000G系列包含以下物品，如有缺少或破损，请与供应商联系
JetNet 6710G 网管型IEEE802.3at高功率PoE
工业以太网交换机 (M12/ Rugged RJ)
JetNet 6810网管型可升压PoE以太网交换机
(M12/ Rugged RJ)
M12on DB9Shielded Console Cable
Rugged M12D-coded 4-pole
Field Assemble able Connecter
Rugged M12A-coded 8-pole
Field Assemble able Connector
Rugged RJ45 Field Assemble
able Connecter
2个壁挂安装配件及8个螺丝
快速安装向导
CD 光盘
JetNet
6710G-M12
JetNet
6710G-RJ
JetNet
6810G-M12
JetNet
6810G-M12
1
1
1
1
1
1
11 1 1
1 1
1 1
11
88
22
1 1
10 10
1
1
CH

1-2 说明文件
下列说明文件，皆可于CD 光盘内找到PDF檔：
4快速安装向导：JetNet 6710G / 6810G 全系列PoE交换机安装信息
4用户手册：JetNet 6710G/ 6810G系列PoE交换机设置信息
3. 硬件安装
3-1 供电系统
电源输入口位于前面板的顶部，透过专有的IP-67连接器(CDG-L207SA)，支持冗余电源输
入。此连接器已随机附上，如果您找不到，请联系当地的经销商。关于输入电源范围，及建议
的线缆尺寸，请参考下表：
48
48
24
24
60
60
60
60
48
48
22
22
冗余输入
V1, V2
V1, V2
V1, V2 并在一起
V1, V2 并在一起
最小 最大 建议 AWG No. /
線徑 (mm2)
AWG 14 / 2.0
AWG 14 / 2.0
AWG 14 / 2.0
AWG 14 / 2.0
JetNet 6710G-M12
JetNet 6710G-RJ
JetNet 6810G-M12
JetNet 6810G-RJ
电源输入 (DC 电压)导线输入 线缆尺寸
2. 外观
Redundant
Power Input
Console
Port Alarm
Output
8x10/100 Base-TX PoE
M12 D-coding
2x1000 Base-T
M12 A-coding
LED: Power, PoE Status, Port Status,
Alarm, System Status, Ring Status
JetNet 6710G-M12 JetNet 6710G-RJ
Redundant
Power Input
Console
Port Alarm
Output
8x10/100 Base-TX PoE
M12 D-coding
2x1000 Base-T
M12 A-coding
LED: Power, PoE Status, Port Status,
Alarm, System Status, Ring Status

JetNet 6810G 只支持单电源输入，所以将V1和V2电源合并在一起以提供升压器较高的电流。
请使用通过UL认证的电源供应器。电源配线请参考图3.1-1和图3.1-2。将设备接地，可以确
保使用安全，并可防干扰。
图3.1-1. 电源配件架构图
Note:
E.G: Earth
Grounding
图3.1-2 电源连接器装配图
RS 232控制端口与继电器报警输出接口均通过
5-Pole M12A-coding接头与外部相连。此连接头
已随机附上。图3.2-1是此M12A-Coding连接头的
拆卸示意图。
随机附上的M12连接头，第1,2,3项零件已组装
完成。请按照下列步骤将线缆及连接头组合在一
起：
图3.2-1 M12连接头拆解示意
M12 disassembly connector
3.2 RS-232 console 和继电器输出连接

Step -1: 将第4,5,6,7项零件组合在一起，先保持宽松，不要锁紧。2
个线缆压盖可适用于直径范围为3.5mm到5.8mm的线缆。选择最适
合的一个使用。
Step-2: 根据针脚配置，将铜线及导线 焊接。连
接头的针脚配置示意图如右：
Console口针脚分配
Step-3: 将第4,5,6,7项零件依序
拴紧在一起。务必确认垫片是在
正确的位置。M12装配说明，请
参考右图：
2. 将封条(第6项零件)塞入第5项
零件
4. 完成圖
1. 已组装完成的将第1部分(含
第1,2,3项零件)跟垫片(第4项零
件)组装在一起，确保垫片保护
好针脚后，再将第1部分与第5
项零件锁紧
3. 将第5项零件与第7项零件
锁紧
请勿在显示灯闪烁时，安装设备或布线，
以免造成设备错误。
3.3 以太网跳线组装
你可以藉由双绞线来连接终端设备或其它网络区段。没有使用的端口应使用端口盖盖上，以确
保连接端口不会生锈。端口盖已随机附上。
!

3.3.1 M12以太网连接头组装
关于快速以太网M12D-Code对M12
D-Code的连接，可从右图两个版本选用其
中一个：
M12对M12以太网线缆配线表
关于快速以太网M12D-Code对RJ45接头的针
脚分配跳线图如右：
M12对RJ45 以太网配线表
关于千兆以太网M12A-Code对RJ45连接的针脚分配跳线，请参考下图：
Gigabit M12-to-RJ45 Ethernet Cable Wiring
M12-to-RJ45 Ethernet Cable Wiring
3.3.2. RJ45接头组装
由于坚固的RJ45接头，交换机RJ版本提供强大的连
接能力。连接器的所有零件如右图所示：
3.3.2-1 RJ45连接头的零件

按照步骤组装此RJ45接头：
M12-to-RJ45 Ethernet Cable Wiring
RJ45 线缆颜色代码
下图根据TIA/EIA公布的两个标准根据TIA/EIA公布的两个标准 – 568A和568B，显示
Cat.-5E UTP/STP的颜色代码。568B接线标准是目前最常见的接线方法。你可以根据应
用来选择最适合的标准，但须确保连接的两端使用相同的标准。
Step 1. 将RJ45线缆的外壳剥去约长
12mm；建议为24 AWG UPT或STP。
Step 4. 将已剥好外壳的RJ45线缆穿
过螺帽，O-环，阀体螺母，主体
Step 2. 在主体上装上阀体螺母。
Step 5. 压接RJ45线缆和RJ45接头,
遵循EIA/TIA 568-B标准
Step 6. 将RJ45头插在主体上，并确
保螺母密封
Step 3. 将O-环套在主体上。

4. 设备管理
4.1 Console管理的准备工作
将RS-232 DB9接头连接到PC的COM口，将M12A-code 5-pin接头连接到JetNet
6710G/6810G的Console口。
JetNet 6710G / 6810G系列交换机支持带内(in-band)及带外(out-band)设置模式。用户可以
通过RS232控制端口对交换机进行设置，或通过网络进行远程管理。您可以选择Telnet/SSH,
Web/HTTPS多种管理界面。
3.4 壁挂/支架安装
JetNet 6710G/6810G系列随机配有支架1套，用户可使用支架将JetNet 6710G/6810G安装在
面板或墙体上。在JetNet 6710G/6810G机体背后组装支架，然后使用合适的螺丝将其安装到
散热良好的墙壁 /面板上。
4.1.1开始 -> 程序 -> 附件 -> 通讯 -> 超级终端。
4.1.2. 为新连接命名。
4.1.3选择COM口，及正确的串口设定。JetNet 6710G/6810G 的串口参数如下：
波特率:9600 / 奇偶校验:None / 数据位:8 / 停止位:1。
4.1.4 连接以后，你会看到交换机的请求登录命令。键入用户名及密码即可登录。默认的用
户名是“admin”, 密码是“admin”。
4.1.5依据用户操作手册进行功能设定。

4.2 Web管理的准备工作
在准备使用内置的Web界面对交换机实施管理之前，请先验证JetNet交换机已经正确接入网
络，且网络中的任意计算机都可以通过Web浏览器访问交换机。
4.2.1开启计算机上的浏览器 (IE浏览器或Mozila Firefox)。
4.2.2在地址栏键入http:// JetNet 6710G/6810G 设备的IP地址(默认的IP地址是
192.168.10.1.)，然后按Enter。
4.2.3出现登录窗口，键入用户名和密码登录交换机。默认的用户名和密码是admin/
admin。
4.2.4点击OK, 则会出现web管理界面的主页。
在Web管理界面左列，会列出所有可用的软件功能，将功能项展开，您还可以查看更详细
的配置。
更多网管功能，请参考用户软件手册。此用户软件手册可于科洛理思网站上下载：
http://www.korenix.com/downloads.htm

1. Überblick
Die JetNet 6710G /6810G Serie sind managebare industrielle Power over Ethernet Switches,
ausgestattet mit acht 10/100 TX Ports mit 15.4 Watt PoE Einspeisung und zwei 10/100/1000
TX Ports für Uplink Verbindungen.
Über Software Konguration oder per LLDP Auto Detection, können die acht 10/100 TX PoE
Einspeisungs-Ports der JetNet 6710G Serie entsprechende High Power Requiring Devices
(PD) mit je 15.4W gemäß IEEE 802.3af oder mit je 30W gemäß des letzten High Power PoE
IEEE 802.3at Standards versorgen.
Zusätzlich sind die acht IEEE 802.3af PoE Einspeisungs-Ports der JetNet 6810G Serie mit
der Korenix patentierten Booster PoE Technology ausgestattet, womit die Switches den
weiten Bereich von 24~57VDC Eingangsspannung akzeptieren und den Anwendungen auch
da, 15.4W pro Port bei 48V anbieten können, wo 48VDC nicht verfügbar ist.
Die 2 Gigabit Ethernet Ports bieten eine Hochgeschwindigkeits-Uplink Verbindung
zu nachgeschalteten Backbone Switches mit Korenix MSRTM Network Redundancy
Technology, mittels derer Fehler innerhalb von 5 Mlliseconds überbrückt werden.
Für Umgebungen mit Vibration und Stößen sind die Switches mit industriellen D-coded
M12 oder robusten RJ45 Verbindungen ausgestattet und gewährleisten damit eine extrem
zuverlässige Ethernet und PoE Verbindung.
1-1 Packungsinhalt
Die JetNet 6000G Serie wird mit den nachfolgenden Teilen geliefert. Wenn eines der Teile
fehlt oder defekt ist, kontaktieren Sie bitte den Kundendienst, der Ihnen gerne weiter helfen
wird.
JetNet 6710G Managed High Power
IEEE 802.3at PoE Switch (M12 / Rugged RJ)
JetNet 6810 Managed Booster PoE
Switch ( M12 / Rugged RJ)
M12 an DB9 geschirmtes Konsol Kabel Cable
Robuster M12 D-codierter 4-pol
Feldmontage Verbinder
Robuster M12 A-codierter 8-pol
Feldmontage Verbinder
Robuster RJ45 Feldmontage Verbinder
2 Wandmontage-Kits & 8 Schrauben
Quick Installation Guide
Dokumentation und Software CD-ROM
JetNet
6710G-M12
JetNet
6710G-RJ
JetNet
6810G-M12
JetNet
6810G-M12
1 1
1 1
11
88
22
1 1
1
1
1
1
1
1
11 1 1
10 10
1
1
DE

1-2 Hinweise zu Handbüchern
2. Ansicht und Abmessungen
Die folgenden Handbücher sind als PDF Datei auf der CD-ROM enthalten:
4Quick Installation Guide: Enthält Informationen zur Installation aller Versionen der JetNet
6710G / 6810G Serie PoE Switches.
4Benutzerhandbuch (user manual) – Konguration der managebaren Versionen der JetNet
6710G/ 6810G Serie PoE Switches.
3. Hardware Installation
3-1 Einschalten des Systems
Der Spannungseingangsport befindet sich oben an der Frontseite und bietet redundante
Eingänge über eine proprietäre, IP67 geschützte Montage-Verbindung (CDG-L207SA),
die der Lieferung beiliegt . Wenn Sie diesen Spannungsversorgungsstecker nicht finden,
kontakten Sie bitte Ihren lokalen Händler. Die verfügbaren Eingangsspannungen und
empfohlenen Kabelspezikationen sind in der folgenden Tabelle aufgeführt:
empfohlen
48
48
24
24
Maximum
60
60
60
60
Minimum
48
48
22
22
Redundanter Eingang
V1, V2
V1, V2
V1, V2 beide anschließen
V1, V2 beide anschließen
AWG No. / Cable
Area (mm2)
AWG 14 / 2.0
AWG 14 / 2.0
AWG 14 / 2.0
AWG 14 / 2.0
JetNet 6710G-M12
JetNet 6710G-RJ
JetNet 6810G-M12
JetNet 6810G-RJ
Eingangsspannung (DC) Eingangskontakt Kabelspezikation
Redundant
Power Input
Console
Port Alarm
Output
8x10/100 Base-TX PoE
M12 D-coding
2x1000 Base-T
M12 A-coding
LED: Power, PoE Status, Port Status,
Alarm, System Status, Ring Status
JetNet 6710G-M12 JetNet 6710G-RJ
Redundant
Power Input
Console
Port Alarm
Output
8x10/100 Base-TX PoE
M12 D-coding
2x1000 Base-T
M12 A-coding
LED: Power, PoE Status, Port Status,
Alarm, System Status, Ring Status

Der JetNet 6810G unterstützt lediglich eine Eingangsspannung, bei der beide V1 und V2
angeschlossen werden, um einen höheren Strom für den Booster bereitzustellen.
Benutzen Sie UL zertizierte Netzteile zur Versorgung des JetNet Switch. Die Verdrahtung
der Spannungsversorgung zeigen Abb. 3.1-1 und 3.1-2. Zum Systemschutz und zum Schutz
vor elektrischen Schlägen sollte das Gehäuse sorgfältig geerdet sein.
Bild 3.1-1.Verdrahtung der Eingangsspannung
Note:
E.G: Earth
Grounding
igure 3.1-2 Montage des Spannungs-Steckers
Die RS-232 Konsole und das Alarm Relais
werden mittels des montierbaren 5-poligen
M12 A-coding Steckers verbunden, der im
Lieferumfang des JetNet Switch enthalten ist.
Die folgende Abb. 3-2-1 zeigt den Aufbau des
M12 A-codierten Steckers.
Im M12 Stecker Paket sind die Teile 1, 2, 3
schon zusammengebaut. Befolgen Sie diese
Schritte für das Löten und Zusammenstecken
von Kabel und Stecker Figure 3.2-1 Aufbau des
feldmontierbaren M12 Steckers
M12 disassembly connector
3.2 RS-232 Konsole und Anschluss des Relaisausgang