Korenix JetNet 3508G-LVDC Series User manual

Korenix JetNet 3508G-LVDC Series
JetNet 3508-LVDC/ 3508G-LVDC
Industrial Ethernet Switch
User’s Manual
Version: 1.0
www.korenix.com

Korenix
JetNet 3508-LVDC/ JetNet 3508G-LVDC
1
Korenix JetNet 3508G-LVDC Series
JetNet 3508-LVDC / 3508G-LVDC
Industrial Ethernet GbE Switch
Copyright Notice
Copyright © 2019 Korenix Technology Co., Ltd.
All rights reserved.
Reproduction in any form or by any means without permission is prohibited.

Korenix
JetNet 3508-LVDC/ JetNet 3508G-LVDC
2
Index
Index...............................................................................................................................2
1. Introduction ...............................................................................................................3
1.1 Overview ..........................................................................................................4
1.2 Product Features..............................................................................................4
2. Hardware Installation.................................................................................................5
2.1 Hardware Introduction ............................................................................................5
Dimensions.....................................................................................................5
Front Panel.....................................................................................................7
Connector definition......................................................................................8
LED Indicators.................................................................................................9
2.2 Wiring the Power Inputs..................................................................................9
2.4 Wiring Earth Ground......................................................................................10
2.5 Rotary Switches (Ignition Function)...............................................................10
3. Appendix ..................................................................................................................13
3.1 Product Specification .....................................................................................13
3.2 Revision History..............................................................................................15

Korenix
JetNet 3508-LVDC/ JetNet 3508G-LVDC
3
1. Introduction
Korenix JetNet 3508G-LVDC Series is a power over Ethernet rail switch that is
specially designed for industrial or commercial applications. The following topics are
covered in this chapter:
1.1 Overview
1.2 Product Features

Korenix
JetNet 3508-LVDC/ JetNet 3508G-LVDC
4
1.1 Overview
JetNet 3508G-LVDC series, Industrial GbE Switches, are designed with full Gigabit
calling JetNet 3508G-LVDC and 1 Gigabit and 7 Fast Ethernet ports calling JetNet
3508-LVDC to ensure high-bandwidth uplink connection for wide markets.
To ensure the high quality of video data transmission, JetNet 3508G-M12 series not
only provides Gigabit bandwidth uplink for large image traffic, but also support CoS
to adjust the priority of data transmission. The compact size with IP-41 steel metal
case allows JetNet 3508G-LVDC series to be reliably operated in -40~75℃extreme
environment.
1.2 Product Features
Korenix JetNet 3508-LVDC / 3508G-LVDC have the following features:
JetNet 3508-LVDC
JetNet 3508G-LVDC
Features Highlight
10/100 TX port
7
-
10/100/1000 TX port
1
8
Class of Service
Yes
Yes
Aluminum Case Protection
IP41(IP54 by request)
IP41(IP54 by request)
Operating Temperature
-40~75℃
-40~75℃
Power Input
12~24V power input
12~24V power input
*Specifications may change without prior notice

Korenix
JetNet 3508-LVDC/ JetNet 3508G-LVDC
5
2. Hardware Installation
2.1 Hardware Introduction
Dimensions
JetNet 3508-LVDC dimensions: 116(H) x 146(W) x 58(D)

Korenix
JetNet 3508-LVDC/ JetNet 3508G-LVDC
6
JetNet 3508G-LVDC dimensions: 116(H) x 146(W) x 58(D)

Korenix
JetNet 3508-LVDC/ JetNet 3508G-LVDC
7
Front Panel
JetNet 3508-LVDC/ 3508G-LVDC include system power LED x1, and 8 LEDs for the
port operating status.
JetNet 3508-LVDC / JetNet 3508G-LVDC (Don’t have PoE LED)
Lnk/Act LED
PWR LED
Power Ignition
Ignition Input

Korenix
JetNet 3508-LVDC/ JetNet 3508G-LVDC
8
Connector definition

Korenix
JetNet 3508-LVDC/ JetNet 3508G-LVDC
9
LED Indicators
The following table describes the function of each LED indicator.
LED
Status
Description
PWR1
Green
DC-IN Power Jack is On
Off
No Power Input
Blinking
Delay time off into standby mode
PWR2
Green
DC-IN Power Jack is On, System Standby
Off
No Power Input
Lnk/Act
Green on
The port is attached with partner.
Green Blinking
The port is transmitting or receiving packets.
Off
The port’s link is inactive
2.2 Wiring the Power Inputs
JetNet 3508-LVDC/ 3508G-LVDC power input is 9~36VDC
IMPORTANT: Do make sure that different models must connect to the corresponding
supply voltage. Guarantee will not apply to the damage caused by wrong input power.
Note: The product intended to be supplied by LPS power supply.

Korenix
JetNet 3508-LVDC/ JetNet 3508G-LVDC
10
1. Insert the positive and negative wires of your DC supply into the V+ and V-
contacts of the M12 A-Code Female connector. The acceptable wire range is 12 to 24
AWG.
2.4 Wiring Earth Ground
To ensure the system will not be damaged by noise or electric shock, we suggest
making a direct connection between the JetNet 3508-LVDC/ JetNet3508G-LVDC and
earth ground to avoid system damage in below photo.
1. On the right side of bottom of the JetNet 3508-LVDC / JetNet3508G- LVDC, there
is one earth ground screw.
2. Loosen the earth ground screw with a screwdriver
3. Tighten the screw after the earth ground wire is connected.
2.5 Rotary Switches (Ignition Function)
4-Pin rotary switch is one of components to trigger delay off into standby mode
function, the detail shows in table 1, how does ignition function work. It is showed in
diagram 1.

Korenix
JetNet 3508-LVDC/ JetNet 3508G-LVDC
11
(Table 1)

Korenix
JetNet 3508-LVDC/ JetNet 3508G-LVDC
12
(Diagram 1)

Korenix
JetNet 3508-LVDC/ JetNet 3508G-LVDC
13
3. Appendix
3.1 Product Specification
3.2 Revision History
3.1 Product Specification
Technology
Standard
IEEE 802.3u 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-TX Gigabit Ethernet
IEEE 802.3x Flow control and back-pressure
Network Performance
Switch Technology
Store and Forward technology with 16Gbps non-blocking (JetNet
3508G-LVDC)
Store and Forward technology with 3.4Gbps non-blocking (JetNet
3508-LVDC)
System Throughput
23.8Mega packets per second, 64Bytes packet length
Transfer packet size
64Bytes ~1518Bytes
MAC Address
16K MAC address table
Packet Buffer
2 Mega bits shared packet buffer
Broadcast storm
control:
Default enabled
Traffic threshold:
25M bps@1000Mbps;
10M bps@100Mbps;
1M bps@10 Mbps
Jumbo frame
Up to 10K Bytes
Transfer
performance
14,880 pps @10Mbps
148,800 pps @100Mbps
1,488,100 pps @1000Mbps

Korenix
JetNet 3508-LVDC/ JetNet 3508G-LVDC
14
Class of Service
Default Enabled
Compliance with IEEE802.1p class of service with Tag Based Priority
rule. Each switch port provides 4 priority queues as following - 8
(Higher) : 4(High) : 2(Low) :1(Lower) scheduling.
The Tag Priority ID as following: Highest (6,7), High (4,5), Low (0,3),
Lowest (1,2)
nterface
Enclosure Port
•1000 Base-T/Gigabit Ethernet (Port #1): 1 x M12-X Code 8-pin
Female (JetNet 3508G-LVDC)
•1000 Base-T/Gigabit Ethernet (Port #1): 1 x M12-X Code 8-pin
Female (JetNet 3508-LVDC)
•10/100 Base-T/TX Fast Ethernet (Port #2~#8): 7 x M12-D Code
4-pin Female (JetNet 3508-LVDC)
•M12-X (Conductor #): (#1) 0P(D1+), (#2) 0N(D1-), (#3)1P(D2+) -,
(#4)1N(D2-), (#5)3P(D4+) (#6)3N(D4-), (#7) 2N (D3-), (#8) 2P
(D3+)
•Power: M12 A-Code 5-pin Male
LED Indicators
Port 1~8: Link (Green on)/Activity (Green Blinking)
Power: System Power Ready (Green on), Ignition function Activity
(Green Blinking)
Power Requirement
System Power
Input voltage: DC 12V or DC 24V, variation range DC 9- 36 V
Power consumption
6 Watts @ DC 24V without PD loading
Power Ignition Management
The count-down timer supports 4 scenarios which can be configured by
Rotary-switch. The detail shows in user manual.
Mechanical
Installation
Wall Mounting
Enclosure Material
Steel Metal with textured paint
Ingress Protection
IP-41 (IP54 available by request)
Dimension (mm)
116 mm (H) x 140 mm (W) x 58 mm (D) (without wall mount clip)
Weight (Kg)
1.105

Korenix
JetNet 3508-LVDC/ JetNet 3508G-LVDC
15
Environmental
Operating Environment
-40°C~75°C (120 Watts PoE/PD Loading), 0~90%, Non-condensing
Storage Environment
-40°C~85°C, 0~90% Non-Condesing
Hi-Pot
AC 1KV for ports-power, power-case
Approvals
Railway Standard
EN50155, EN 50121-4, EN50121-3-2
Traffic
E-mark E13 10R-05 14802
EMC
EMI: EN50121-3-2, FCC Class A, IEC/EN61000-6-4
EMS:EN50121-3-2/EN50121-1, IEC/EN61000-6-2
IEC/EN61000-4-2, IEC/EN61000-4-3, IEC/EN61000-4-4,
IEC/EN61000-4-5, IEC/EN61000-4-6, IEC/EN61000-4-8, IEC/EN61000-4-9
Variation/Shock
IEC 61373
Free Fall
IEC 60068-2-32 with package Note-1
MTBF (hrs)
379,940
Warranty
5 Years
3.2 Revision History
Edition
Date
Modifications
V1.0
09/04/2019
New edition