Kraus Artec Pro KPF-1604 User manual

Artec Pro 2 Function Commercial
Style Kitchen Faucet
KPF-1604
INSTALLATION GUIDE
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2019 Kraus USA Inc. I REV. APR 08, 2021
™

Congratulations on the purchase of your new
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance, or have any problems with your product:
Please contact our Customer Service Team
1-800-775-0703 / [e-mail]
Have the model number available, and retain a copy of your receipt
with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
DO NOT RETURN TO STORE
1

Prior to Installation:
•Make sure you have all necessary parts by checking the diagram and parts list. If
any part is missing or damaged, please contact Kraus Customer Service at 800-775-
0703 for a replacement
•
•Pre-drilled countertop hole size requirement: 1-3/8”(min)
•Max countertop thickness: 3”
Tools you will need:
13
Wrench Phillips Screwdriver Safety Goggles
Silicone Sealant
(optional)
Pipe Tape
2
Turn o the hot and cold water lines at the angle stops and turn on the old faucet
to release any built-up pressure

3
A. Spray Head
C. Rubber Washer
D. Metal Washer
F. Screws
B
Diagram and Parts List
G. 3-Way Quick Connect Assembly
H. Weight
C
B. Faucet Body
E. Mounting Nut
D
G
E
F
K
I
J
I. Weight Clip
J. Quick Connector
K. Hex Wrench
H
A
L
L. Aerator Key

4
Faucet Dimension
Installer Tip:
3/8”-compression
3.2
4 1/8''
[106.0mm]
27 1/2''
[697.1mm]
3''
[76.0mm]
12''
[304.8mm]
10 1/4''
[261.8mm]
2 1/8''
[54.0mm]
11''
[280.9mm]
7''
[178.4mm]
8 1/2''
[217.0mm]

5
F
Step 1: Installing the faucet
Shut o the water supply. Place faucet (B)
through the hole in countertop.
Secure the faucet (B) to the countertop using
the rubber washer (C), metal washer (D) and
mounting nut (E) provided. Tighten screws (F).
Step 2: Securing the faucet assembly
Push the 3-way quick connect assembly (G)
rmly upward and attach it to the receiving
block (a). Pull down moderately to ensure the
connection has been made.
B
C
D
FE
Click
G
a
NOTE: Ensure the 3-way quick connect
assembly and block are installed in the
correct direction, as shown. Push up until
cannot pull down. You will hear a click.
(2 N.m
Max)

Step 3: Securing the faucet assembly
Install the weight clip (I) at the point of
the hose marking "weight here". Insert
the weight (H) onto the weight clip (I)
by sliding it down onto the weight clip (I).
Step 4: Securing the faucet assembly
6
Weight
here
Weight
here
I
H
Push the quick connector (J) rmly upward
and attach it to the receiving block (b). Pull
down moderately to ensure the connection
has been made.
J
b
NOTE: Push up until cannot pull
down. You will hear a click.

Step 5: Connect waterlines tomain valve
Step 6: Flush faucet
7
Attach waterlines to angle stops
and tighten until snug. Turn on angles
stops and check for leaks (DONOT TURN
FAUCETON)
Important: After installationis complete,
remove aeratorwith aerator key(L).
Turn onwater supply and allow bothhot
and cold water to run for at least one minute
each. While water is running, check for leaks.
that could cause damage to internal parts.
L
Open
Cold
Hot
NOTE
are installed before connecting to
the main valve.

8
Step 7: Sprayer Function
Sprayer Water Function
When pressing the button on the sprayer
head (A) with your hands, it can switch the
waterway to the sprayer water. At this time,
spout stops ushing.
PRESS
A

Replacement Parts
1. Spray Head
Replacement Parts List Part #
2. Inverter
3. Spring Assembly
6. Spout Washers Kit
7. Spout O-Ring Kit
9. Aerator (1.8 GPM)
Finish / Color
KP27271
KP27273
KP27286
KP27287
KP27274
KP27270
KP27245
8. Spout
24. Sprayer Hose KP27284
10. Aerator Key KP27276
12. Bonnet Nut KP27278
*Denotes spray hose assembly color options:
Black hose with Spot-Free Antique Champagne Bronze (BLSFACB) ; Grey hose with Spot Free Stainless Steel (GRSFS) ;
Black hose with Matte Black (BLMB); Black hose with Brushed Brass (BLBB);
**Denotes faucet component color options:
SFS - Spot Free Stainless Steel ; MB - Matte Black ; SFACB - Spot Free Antique Champagne Bronze ; GR - Grey ; BL - Black；
SFSB - Spot Free Black Stainless ; BB - Brushed Brass ; SFSMB - Spot Free Stainless Steel+Matte Black ;
SFACBMB - Spot Free Antique Champagne Bronze+Matte Black ;
SFS, MB ,SFACB,
BB*
13. Cap
15. Flange & Washer
KP27279
KP27280
16. Rubber & Metal Washer KP27281
18. Weight & Clip Assembly
19. Block
KP27236
20. 3-Way Quick Connect
Assembly
KP27288
KP27283
GRSFS, BLMB ,
BLBB, BLSFACB*
SFS, MB , SFACB,
BB*
11. Cartridge KP27083
21. Hex Wrench KP27020
17. Mounting Nut & Screws KP27282
9
20
1
11
12 13
14
21
23
16
17
18
26
22
24
3
10
15
25
19
4
KP272854. Sprayer Support Assembly SFS, MB ,SFSMB,
SFACBMB,SFACB,
BB, SFSB*
SFS, SFACB, BB,
MB , SFSB*
14. Faucet Handle KP27277
8
2
5
5. Spout Nut KP27272
6
SFS, SFACB, BB,
MB , SFSB*
7
9
SFS, MB , SFACB,
BB, SFSB*
SFS, MB , SFACB,
BB*
SFS, MB , SFACB,
BB, SFSB*
22. Filter Washer KP27167
23. Sprayer Washer KP27208
25. Connector KP27318-WH
26. Quick Connector
Assembly
KP27090
WHITE