Kraus KPF-2230 User manual

Single Lever Pull Out Kitchen Faucet
KPF-2230
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV. October 25, 2017
INSTALLATION GUIDE

1
Congratulations on the purchase of your new
Kraus plumbing xture!
Please keep teh box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance, or have any problems with your product:
Please contact our Customer Service Team
1-800-775-0703 / customerser[email protected]
Have the model number available, and retain a copy of your receipt
with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
DO NOT RETURN TO STORE

2
Prior to Installation:
• Make sure you have all necessary parts by checking the diagram and parts
list. If any part is missing or damaged, please contact Kraus Customer
Service at 800-775-0703 for a replacement
• Turn o the hot and cold water lines at the angle stops and turn on the old
faucet to release any built-up pressure
• Flush angle stops to release any debris prior to installing new plumbing
• Pre-drilled hole: 1-3/8” (min)
• Max countertop thickness: 1-3/8”
Tools you will need:
1
10
279
10 31/32”
Minimum distance 90mm
Less than 90mm
Cold Water
32 3/32”
Ø35~Ø38
1
23
10
9
11
12 13
Hexagon Nut
Hot
Water
Cold
Water
2 3
1
45
7
6
8
45
67
8
Ø1 3/8”~Ø1 1/2”
815
194
7 5/8”
Ø1 3/8~Ø1 1/2”
30˚
10 11
Close
Open Left
Hot Water
Push
25˚ 90˚
12
13
8
7
Ø35~Ø38
Max35
217
8 17/32”
Max1 3/8”
9
11
12 13
2
3
4
5
6
7
8
Adjustable Wrench Phillips Screwdriver Pipe Tape Silicone Sealant

3
1. sprayhead
2. faucet assembly
3. mounting
hardware
A. Rubber Washer
B. Metal Washer
C. Mounting Nut
D.Mounting Screws
4. hose
5. escutcheon
6. hex wrench
7. weight
7
6
1
5
2
3A
3C
3B
3D
4
Diagram and Parts List

4
10 3/16"
(258.5mm)
15 3/16"
(385mm)
6 1/8"
(156mm)
5 3/8"Max
(137mm)Max
6 9/16"Max
(166mm)Max
Ø 2 3/8"
(Ø 60mm)
1 1/4"-18UNEF-2A
2-1/2-14NPSM-2A
check valve
Faucet Dimensions

5
9 3/16"
(234mm)
2 1/2"
(63.4mm)
8 1/8"
(207mm)
11 5/16"
(288mm)
1/16"~1 1/2"
(1mm~38mm)
19º
Faucet Dimensions

6
Step 1: Remove mounting hardware
Remove mounting hardware(3)
Step 2A: Installing the faucet with deck plate
For three-hole installation,
deck plate (5), and silicone
sealant are required

7
Insert the faucet body (2) into
the hole on the countertop or
deck plate assembly (5). Install
rubber washer (3A), metal
washer (3B), and mounting
nut (3C) on the mounting
pipe from underneath the
countertop
Step 3: Install faucet and mounting hardware
Step 2B: Installing the faucet without deck plate
For single-hole installation,
deck plate (5), and silicone
sealant are NOT required

8
Step 4: Attach spray hose and counterweight
Remove the plastic seal cover
from the outlet port prior to
pushing the hose adapter onto
the same port, you will hear
a “click” sound once they are
joined.
Attach metal weight to hose
to prevent hose from twisting
and returns hose to proper
position.
Tighten supply hose ends to
faucet shank and water supply
source.Note: Hand tighten the
supply hose and then tighten
1/4 turn with adjustable
wrench. Overtightening the
supply hose can cause leaking.
Purchase exible supplies or
bull-nose risers separately.
Step 5: Attach supply hose

9
Step 6: Open water
Step 7: Flush faucet
Open the water valve and
check for leaks at supply line
connection.
After installing faucet, remove
pull-down spray and turn on
water to remove any left over
debris. Re-assemble spout