Kraus Bolden KFF-1610CH User manual

www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV. December 10, 2020
BoldenTM Single Handle Pull
Down Kitchen Faucet
KPF-1610
R
INSTALLATION MANUAL

2
Congratulations on the purchase of your new
Kraus plumbing fixture!
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance or have any problems with your product:
Please contact our Customer Service Team
1-800-775-0703 / [email protected]
Have the model number available and retain a copy of your
receipt with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
DO NOT RETURN TO STORE
STOP

3
Prior to Installation:
·Make sure you have all necessary parts by checking the diagram and
parts list. If any part is missing or damaged, please contact Kraus
Customer Service at 800-775-0703 for a replacement.
·Turn off the hot and cold water supply at the angle stops and turn on
the old faucet to release any built up pressure. Remove existing faucet.
Clean sink or countertop to remove any debris, plumber’s putty, or
silicone.
·Flush angle stops to release any debris prior to installation.
·Pre-drilled hole size requirement: 1 3/8" (min)
·Max countertop thickness: 1 3/4”
Tools Required
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or [email protected]
Adjustable Wrench Phillips Screwdriver
Safety Goggles Pipe Tape
Silicone Sealant

44
Diagram and Parts List
A. Spray Head
B. Faucet Body
C. Mounting Hardware
C1. Rubber & Metal
Washer
C2. Mounting Nut
C3. Mounting Screws
D. Quick Connector
E. Weight
E1. Weight Clip
E2. Weight
F. 2.5mm Hex Wrench
A
B
E1 C1
E2 C2
C3
D
F

55
Installer Tip:
Shut off main water supply before installing new faucet.
4 1/2"
(116mm)
18"
(456mm)
2 1/4"
(56mm)
6 3/8"
(162mm)
8 3/4"
(221mm)
3 1/2"
(88mm)
Ø1 7/8"
(48mm)
Ø2 1/8"
(54mm)
10 3/4"
(274mm)
22 3/4"
(578mm)
17"
(432mm)
90°
25°
9/16" - 24UNF
Faucet Dimension

66
Step 1. Remove mounting hardware
Step 2. Installing the faucet assembly
Shut off the water supply. Remove
the old faucet. Clean the mounting
surface. Remove mounting
hardware (C) from faucet body (B).
Optional No Escutcheon
Installation.
Insert faucet body through the
hole in the sink.
C

7
Step 3. Securing the faucet assembly
Install the rubber washer and
metal washer (C1) onto the
threaded mounting shank.
Thread the nut (C2) onto the
mounting shank. Lock the nut (C2)
into position by tightening the
screws (C3). Do not overtighten.
Step 4. Securing the faucet assembly
Push the quick connector (D)
firmly upward and attach it to the
receiving block (1). Pull down
moderately to ensure the
connection has been made.
C1
C2 C3
1
D

8
Step 5. Securing the faucet assembly
Step 6. Making the waterline connections
Install the weight clip (E1) at the
point of the hose marking "weight
here". Insert the weight (E2) onto
the clip (E1) by sliding it down
onto the clip (E1).
Thread the nut (1) on the supply
line onto the outlet of the water
supply valve and tighten with a
wrench. Do not overtighten.
Weight
here
Weight
here
1
E1
E2
E1
E2

9
Step 7. Flushing and checking for leaks
Pull the hose assembly out of the spout
and remove the spray head by unscrewing
it from the hose in a counterclockwise
direction. Be sure to hold the end of the
hose down into the sink and turn the
faucet on to the warm position where it
mixes hot and cold water. Flush the water
lines for one minute. This flushes away any
debris that could cause damage to internal
parts. Check for leaks. Re-tighten any
connections if necessary, but do not
overtighten. Reinstall the spray head by
hand tightening it back onto the spray
hose. After installation is completed, turn
on the hot and cold water supplies. Check
for leaks.

Replacement Parts
Replacement Finish/Color Part #
Parts List
KP27087
KP27088
KP27089
KP27020
*Denotes spray hose assembly color options:
Spray hose assembly color options: Black hose w/
Brushed Gold connector (BLBG), Black hose with
Spot-Free Stainless connector (BLSFS), Gray hose with
Chrome connector (GRCH), Gray hose with Spot-Free
Stainless connector (GRSFS), Gray hose with Stainless
Steel connector (GRSS), Black hose with Matte Black
connector (BLMB), Black hose with Stainless Steel
connector (BLSS), Black hose with Spot-Free Antique
Champagne Bronze (BLSFACB)
**Denotes faucet component color options:
CH - Chrome
SFS - Spot Free Stainless Steel
SS - Stainless Steel
MB - Matte Black
BG - Brushed Gold
SB - Black Stainless
MBSFSB - Matte Black/Spot Free Stainless Steel
SFACB - Spot Free Antique Champagne Bronze
SFACBMB - Spot Free Antique Champagne
Bronze/Matte Black
MBSB - Matte Black/Black Stainless
SFSCH - Spot Free Stainless Steel/Chrome
BGMB - Brushed Gold/Matte Black
SFSB - Spot Free Black Stainless
SFSMB - Spot Free Stainless Steel/Matte Black
SSMB - Stainless Steel/Matte Black
SSCH - Stainless Steel/Chrome
BL - Black
WH - White
GR- Grey
1. Sprayer
2. Screen Washer
3. Sprayer Hose
4. Flow Regulator
Assembly (1.8GPM)
5. Quick Connector
Assembly
6. Spring Assembly
7.1. Inverter
7.2. Wearable Ring &
O-ring Assembly
9. Set Screw
11. Cartridge Kerox
K-35
12. Bonnet Nut
13. Cap
14. Handle Assembly
15. Set Screw
16. Cover Button
17. Washer
18. Rubber & Metal
Washer
19. Mounting Nut &
Screws
20. Block
21. O-ring
22. Weight & Clip
23. Hex Wrench
BLBG,BLMB,BLSFS,BLSS,GRCH
BLSFACB,GRSFS,GRSS**
WH**
BL,GR**
KP27074
KP27090
KP27220
KP27122
KP27085
KP27084
KP27083
KP27082
KP27081
KP27072
KP27001
KP27002
KP27091
KP27028
KP27079
KP27073
KP27092
KP27093
4
5
7
7.1
7.2
9
310
11 12 13
14
1
2
25
20
21
17
18
19
22
23
24
15
16
6
8
KP27123
24. Inverter
KP27167
25. Filter Washers
Assembly
10. Index
8. Sprayer Support
Assembly
CH, SFS, SS, SB, MB,
BG, SFACB, SFSB**
KP27124
KP27232
7. Sprayer Holder CH,SFS,SS,SB,SFSMB,BG,SFACB,
MB,SFACBMB,BGMB,SFSB,MBSB,
SFSCH,SSCH,SSMB,MBSFSB**
KP27231
Assembly
CH,MB,SB,SFACB,SFS,BG,SFSB**
CH,SFS,SS,SB,MB,SFSB,BG,
SFACB,SFACBMB,BGMB**
CH, SFS, SS, SB, MB,
BG, SFACB, SFSB**
BL,GR**
CH,SFS,SS,SB,SFSMB,BG,SFACB,
MB,SFACBMB,BGMB,SFSB,SSMB,
SFSCH,SSCH,MBSB,MBSFSB**