Kraus Allyn FF-102 User manual

AllynTM Transitional Stand Alone
Filtration Faucet
FF-102

Congratulations on the purchase of your new
Kraus plumbing fixture!
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance or have any problems with your product:
DO NOT RETURN TO STORE
STOP
2

Tools Required
Adjustable Wrench Phillips Screwdriver Supply Lines
3
Prior to Installation:
·Make sure you have all necessary parts by checking the diagram and
parts list. If any part is missing or damaged, please contact Kraus
·Turn off the hot and cold water supply at the angle stops and turn on
the old faucet to release any built up pressure. Remove existing faucet.
Clean sink or countertop to remove any debris, plumber’s putty, or
silicone.
·Flush angle stops to release any debris prior to installation.
·Pre-drilled hole size requirement: 1 1/4" (min)
·Max countertop thickness: 3 1/16
Safety GogglesSilicone Sealant

Diagram and Parts List
4
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
C
D
E
F
G
A. Faucet Assembly
B. Flange
C. Rubber Washer
D. Metal Washer
E. Mounting Nut
F. Connector 3/8"
G. Connector 1/4"
A
B

Installer Tip:
Shut off main water supply before installing new faucet.
Faucet Dimensions
5
8 3/8“
[214mm]
4 1/2”
[115mm]
10 3/8“
[262mm]
3 1/8“
[80mm]
2 3/8”
[61mm]
1 3/4”
[45mm]

Step 1: Preparing for installation
Remove the rubber washer (C),
metal washer (D), and mounting
nut (E) from the end of the stud.
Step 2. Installing the faucet assembly
6
C
D
E
A
C
D
E
Place the faucet assembly (A)
through the selected hole in the
sink or countertop. On the
underside of the sink or countertop,
slide the rubber washer (C) and
metal washer (D) onto the stud.
Thread the mounting nut (E) onto
the stud, and tighten securely
using your wrench.

Step 3. Connecting the quick connect adaptor and water line
7
A
F
3/8 in. Water line from
filtration system
Thread the quick connect adaptor
(F) onto the end of the faucet
assembly (A) stud, and tighten
securely using a wrench. Connect
the 3/8 in. water line from the
filtration system by pushing the
line into the connector (F). Pull
down on the 3/8 in. line slightly to
ensure the quick connect fitting
has engaged.
Note: A 1/4" connector (G) is
included for 1/4" water lines.

Replacement Parts
Replacement Parts List Finish/Color Part #
KP44046
KP44047
KP44067
1. Locking Ring
2. O-Ring
3. Cover Button
4. Handle
5. Cartridge Screw
6. Cartridge Cover
7. Cartridge
8. Flange
9. Rubber Washer
10. Metal Washer
11. Mounting Nut
12. Connector 1/4"
*Denotes faucet component color options:
SFS - Spot Free Stainless Steel
MB - Matte Black
BG - Brushed Gold
KP44065
KP44066
KP44064
KP44048
KP44063
KP44052
KP44053
KP44054
KP44057
8
SFS, MB, BG*
13. Connector 3/8" KP44055
SFS, MB, BG*
SFS, MB, BG*
SFS, MB, BG*
1
2
8
9
10
11
12
13
3
4
5
6
7